Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures

This document specifies the nominal sizes of apertures for test sieves used for determination of particle size of aggregates.
It applies to
-   test sieves of perforated metal plate having square holes of size from 4 mm and up to 125 mm;
-   test sieves of metal wire cloth having apertures sizes below 4 mm down to 0,063 mm.

Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 2: Bestimmung der Korngrößenverteilung - Analysensiebe, Nennweite der Sieböffnungen

Dieses Dokument legt die Nennweiten von Öffnungen für Analysensiebe fest, die zur Bestimmung der Korngröße von Gesteinskörnungen verwendet werden.
Es gilt für:
a)   Analysensiebe aus Lochblech mit quadratischen Öffnungen mit einer Öffnungsweite von 4 mm bis 125 mm;
b)   Analysensiebe aus Metalldrahtgewebe mit einer Öffnungsweite von unter 4 mm bis 0,063 mm.

Essais pour déterminer les caractéristiques géométriques des granulats - Partie 2: Détermination de la granularité - Tamis de contrôle, dimensions nominales des ouvertures

Le présent document spécifie la dimension nominale des ouvertures des tamis de contrôle utilisés pour la détermination de la granulométrie des granulats.
Il s'applique :
a) aux tamis de contrôle en tôles métalliques perforées comportant des trous carrés d’une dimension allant de 4 mm à 125 mm ;
b) aux tamis de contrôle en tissus métalliques comportant des ouvertures d’une dimension inférieure à 4 mm et jusqu’à 0,063 mm.

Preskusi geometričnih lastnosti agregatov - 2. del: Določevanje zrnavosti - Preskusna sita, velikosti nazivnih odprtin

General Information

Status
Published
Public Enquiry End Date
14-May-2019
Publication Date
26-Jul-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Jul-2020
Due Date
18-Sep-2020
Completion Date
27-Jul-2020

Relations

Buy Standard

Standard
EN 933-2:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 933-2:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 933-2:2020
01-september-2020
Nadomešča:
SIST EN 933-2:1999
Preskusi geometričnih lastnosti agregatov - 2. del: Določevanje zrnavosti -
Preskusna sita, velikosti nazivnih odprtin
Tests for geometrical properties of aggregates - Part 2: Determination of particle size
distribution - Test sieves, nominal size of apertures
Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 2:
Bestimmung der Korngrößenverteilung - Analysensiebe, Nennweite der Sieböffnungen
Essais pour déterminer les caractéristiques géométriques des granulats - Partie 2:
Détermination de la granularité - Tamis de contrôle, dimensions nominales des
ouvertures
Ta slovenski standard je istoveten z: EN 933-2:2020
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 933-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 933-2:2020

---------------------- Page: 2 ----------------------
SIST EN 933-2:2020


EN 933-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2020
EUROPÄISCHE NORM
ICS 91.100.15 Supersedes EN 933-2:1995
English Version

Tests for geometrical properties of aggregates - Part 2:
Determination of particle size distribution - Test sieves,
nominal size of apertures
Essais pour déterminer les caractéristiques Prüfverfahren für geometrische Eigenschaften von
géométriques des granulats - Partie 2: Détermination Gesteinskörnungen - Teil 2: Bestimmung der
de la granularité - Tamis de contrôle, dimensions Korngrößenverteilung - Analysensiebe, Nennweite der
nominales des ouvertures Sieböffnungen
This European Standard was approved by CEN on 17 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 933-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 933-2:2020
EN 933-2:2020 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements for applicable test sieves . 5
5 Nominal size of apertures for applicable test sieves . 5
Bibliography . 7

2

---------------------- Page: 4 ----------------------
SIST EN 933-2:2020
EN 933-2:2020 (E)
European foreword
This document (EN 933-2:2020) has been prepared by the Technical Committee CEN/TC 154
“Aggregates”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards
shall be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 933-2:1995.
The main technical change compared to EN 933-2:1995 is the addition of Table 1 "Applicable test
sieves – Nominal size of apertures", in
...

SLOVENSKI STANDARD
oSIST prEN 933-2:2019
01-maj-2019
3UHVNXVLJHRPHWULþQLKODVWQRVWLDJUHJDWRYGHO'RORþHYDQMH]UQDYRVWL
3UHVNXVQDVLWDYHOLNRVWLQD]LYQLKRGSUWLQ
Tests for geometrical properties of aggregates - Part 2: Determination of particle size
distribution - Test sieves, nominal size of apertures
Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 2:
Bestimmung der Korngrößenverteilung - Analysensiebe, Nennweite der Sieböffnungen
Essais pour déterminer les caractéristiques géométriques des granulats - Partie 2:
Détermination de la granularité - Tamis de contrôle, dimensions nominales des
ouvertures
Ta slovenski standard je istoveten z: prEN 933-2
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
oSIST prEN 933-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 933-2:2019

---------------------- Page: 2 ----------------------
oSIST prEN 933-2:2019


DRAFT
EUROPEAN STANDARD
prEN 933-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2019
ICS 91.100.15
English Version

Tests for geometrical properties of aggregates - Part 2:
Determination of particle size distribution - Test sieves,
nominal size of apertures
Essais pour déterminer les caractéristiques Prüfverfahren für geometrische Eigenschaften von
géométriques des granulats - Partie 2: Détermination Gesteinskörnungen - Teil 2: Bestimmung der
de la granularité - Tamis de contrôle, dimensions Korngrößenverteilung - Analysensiebe, Nennweite der
nominales des ouvertures Sieböffnungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 154.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 933-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 933-2:2019
prEN 933-2:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements for applicable test sieves . 4
5 Nominal size of apertures for applicable test sieves . 4
Bibliography . 6

---------------------- Page: 4 ----------------------
oSIST prEN 933-2:2019
prEN 933-2:2019 (E)
European foreword
This document prEN 933-2:2019 has been prepared by the Technical Committee CEN/TC 154
"Aggregat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.