SIST EN 14571:2005

Oznaka standarda: SIST EN 14571:2005
Koda projekta: 00262153
Organizacija: SIST
Naslov (angleški): Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method
Naslov (slovenski): Kovinske prevleke na materialih z nekovinsko osnovo – Merjenje debeline prevleke – Metoda mikroupornosti
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 14571:2005 angleški jezik Active SIST-C: 45.98 EUR
PDF
Papir
Tehnični odbor: IPKZ - Protikorozijska zaščita kovin
ICS: 17.040.20 25.220.40
Status: Objavljen
Objavljen: 01-jul-2005
Refer. št. objave: Sporocila 2005-07-01
Področje projekta (angleško): This standard describes a method for nondestructive measurements of the thickness of conductive coatings on nonconductive base materials. This method is based on the principle of the sheet resistivity measurement and is applicable to any conductive coatings and layers of metal and semiconductor materials. In general, the probe has to be adjusted to the conductivity and the thickness of the respective application. However, this standard is focussing on metallic coatings on nonconductive base materials (e.g. Copper on plastic substrates, printed circuit boards). NOTE 1 This method also applies to the measurement of through-hole copper thickness of printed circuit boards. However, for this application a probe geometry different from the one described in this standard is necessary. NOTE 2 This method is also applicable for thickness measurements of conductive coatings on conductive base materials, if the resistivity of the coating and the base material is different. This case is not considered in this standard.

Najbolje prodajani standardi