iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 523.3.406 to 408 S1:1998

(Main)

Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC based coating

Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC based coating

This sheet gives requirements for E type glass sleeving using either braided or knitted construction with a continuous flexible coating based on polyvinyl chloride (PVC) or its co-polymers or blends thereof - The sleeving is normally available in bore sizes 0.3 mm to 25 mm and in the following colours: black - white - red - yellow - blue - brown - green - grey - orange - pink and green/yellow

Bestimmung für Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen -- Blätter 406 bis 408: Glasfilament-Textilschläuche mit Beschichtung auf PVC-Basis

Spécification pour gaines isolantes souples -- Partie 3: Spécifications particulières aux types particuliers de gaines -- Feuilles 406 à 408: Gaines en fibre de verre tissées, avec revêtement PVC

Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving PVC based coating (IEC 60684-3-406 to 408:1988)

General Information

Status
Withdrawn
Publication Date
31-May-1998
Withdrawal Date
30-Mar-2009
ICS
29.035.30 - Glass and ceramic insulating materials
Technical Committee
IZO - Insulating materials
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Mar-2009
Due Date
29-Mar-2009
Completion Date
31-Mar-2009
Ref Project
HD 523.3.406 to 408 S1:1990 - Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC based coating

Relations

Replaced By
SIST EN 60684-3-406 to 408:2004 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC coating
Effective Date
06-May-2014
Replaced By
SIST EN 60684-3-406 to 408:2004 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC coating
Effective Date
07-Jun-2022
Replaced By
SIST EN 60684-3-406 to 408:2004 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC coating
Effective Date
29-Jan-2023

Buy Standard

HD 523.3.406 to 408 S1:1998HD 523.3.406 to 408 S1:1998
PreviousNext
Standardization document
HD 523.3.406 to 408 S1:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 523.3.406 to 408 S1:1998
01-junij-1998
Specification for flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving PVC
based coating (IEC 60684-3-406 to 408:1988)
Specification for flexible insulating sleeving -- Part 3: Specification requirements for
individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC based
coating
Bestimmung für Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen --
Blätter 406 bis 408: Glasfilament-Textilschläuche mit Beschichtung auf PVC-Basis
Spécification pour gaines isolantes souples -- Partie 3: Spécifications particulières aux
types particuliers de gaines -- Feuilles 406 à 408: Gaines en fibre de verre tissées, avec
revêtement PVC
Ta slovenski standard je istoveten z: HD 523.3.406 to 408 S1:1990
ICS:
29.035.30 .HUDPLþQLLQVWHNOHQL Ceramic and glass insulating
L]RODFLMVNLPDWHULDOL materials
SIST HD 523.3.406 to
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60684-3-406 to 408:2004(Main)
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 406 to 408: Glass textile sleeving with PVC coating
EN 60684-3-406 to 408:2003

Gives the requirements for E-type glass sleeving using either braided or knitted construction with a continuous flexible coating based on polyvinyl chloride (PVC) or its copolymers or blends thereof. These sleevings have been found suitable up to temperatures of 105 °C.
The sleeving is normally available with internal diameters between 0,3 mm and 25 mm and is normally supplied in the following colours : black, white, red, yellow, blue, brown, green, grey, orange, pink and green/yellow.
Sizes or colours other than those specifically listed in this standard may be available as custom items.  These items shall be considered to comply with this standard if they comply with the other property requirements listed in Tables 2 and 5, except for dimensions, and, where applicable, in Table 3.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
This edition has been aligned to reflect the changes made to the 2nd edition of IEC 60684-2, Test methods, and standardizes on a 100 mm long electrode for breakdown voltage.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60684-3-300:2004(Main)
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 300: Glass textile fibre sleeving, braided, uncoated
EN 60684-3-300:2002

Gives the requirements for glass textile fibre sleeving, uncoated, constructed from a braid of E-type yarn. The sleeving is annealed by heat treatment to assist in maintaining a circular cross-section. This sleeving is suitable for use at temperatures up to 350 °C. It is normally available in internal diameters between 0,5 mm and 30 mm and is normally supplied in its natural colour. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60684-3-400 to 402:2004(Main)
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating
EN 60684-3-400 to 402:2002

Gives the requirements for three types of E-type glass sleeving using either braided or knitted construction, with a continuous silicone elastomer coating and differentiated by their breakdown voltage (sheet 400: high breakdown voltage; sheet 401: medium breakdown voltage; sheet 402: low breakdown voltage). These sleevings have been found suitable for temperatures up to 180 °C.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60684-3-403 to 405:2004(Main)
Flexible insulating sleeving -- Part 3: Specification for individual types of sleeving -- Sheets 403 to 405: Glass textile sleeving with acrylic based coating
EN 60684-3-403 to 405:2002

Gives the requirements for three types of E-type glass sleeving using either braided or knitted construction with a continuous acrylic based coating, and differentiated by their breakdown voltage: high breakdown voltage (sheet 403), medium breakdown voltage (sheet 404) and low breakdown voltage (sheet 405). These sleevings have been found suitable for use at temperatures up to 155 °C.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60672-2:2001(Main)
Ceramic and glass insulating materials -- Part 2: Methods of test
EN 60672-2:2000

Applicable to ceramic, glass and glass-ceramic materials to be used for electrical insulation purposes. Specifies methods of test. Intended to provide test results typical of the material from which the test pieces are processed. Since, in the majority of cases, ceramic components for insulating purposes are of rather different size and shape to test pieces, the results of such tests provide only a guide to the actual properties of components. The limitations imposed by the method of forming and processing are discussed where relevant.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60684-3-409:2001(Main)
Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating
EN 60684-3-409:1999

Gives the requirements for E-type glass sleeving in a braided construction with a continuous polyurethane (PUR)-based coating with a thermal index of 155.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61067-2:1998(Main)
Specification for glass and glass polyester fibre woven tapes -- Part 2: Methods of test
EN 61067-2:1997

Gives methods of test for the materials defined in EN 61067-1.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60672-1:1998(Main)
Ceramic and glass insulating materials -- Part 1: Definitions and classification
EN 60672-1:1995

Gives definitions and classification for ceramic, glass, and glass-ceramic materials to be used for electrical insulation purposes.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61067-3-1:1998(Main)
Glass and glass polyester fibre woven tapes -- Part 3: Specifications for individual materials -- Sheet 1: Type 1, 2 and 3 tapes
EN 61067-3-1:1995

Type 1 tapes are woven on conventional looms with glass fibres, type 2 tapes are woven on shuttle-less looms with glass fibres, type 3 tapes are woven on shuttle-less looms with warp glass fibres and weft polyester fibres.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61067-1:1998(Main)
Specification for glass and glass polyester fibre woven tapes -- Part 1: Definitions, classification and general requirements
EN 61067-1:1997

Specifies requirements for loomstate, continuous filament tapes woven on conventional or shuttleless looms from either glass fibres or a combination of glass and polyester fibres. The ranges of nominal sizes covered by this standard are: width: 10 mm to 50 mm, thickness: 0,05 mm to 0,40 mm.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day