Characterization of sludges - Sludge management in relation to use or disposal

This Technical Specification gives guidance for dealing with the production and control of sludge in relation to inputs and treatment and gives a strategic evaluation of recovery, recycling and disposal options for sludge according to its properties and the availability of outlets. This Technical Specification is applicable for sludges from: - storm water handling; - night soil; - urban wastewater collecting systems; - urban wastewater treatment plants; - treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EC); - water supply treatment plants; but excluding hazardous sludges from industry.

Charakterisierung von Schlämmen - Management von Schlamm zur Verwertung oder Beseitigung

Diese Technische Spezifikation gibt Hinweise, wie mit der Erzeugung und Kontrolle von Schlamm bezüglich der Einleitungen und Behandlung umzugehen ist und vermittelt eine Entwicklungsstrategie der Möglichkeiten für die Wiederverwendung, die Verwertung und Beseitigung von Schlamm entsprechend dessen Eigenschaften und der vorhandenen Entsorgungsmöglichkeiten.
Diese Spezifikation gilt für Schlämme aus:
-   Ableitungen von Regenwasser;
-   Fäkalien;
-   städtischen Abwassersammelsystemen;
-   städtischen Abwasserbehandlungsanlagen;
-   der Behandlung von industriellen Abwässern vergleichbar mit der Behandlung von städtischen Abwässern (entsprechend den Festlegungen in Richtlinie 91/271/EC [1]);
-   Wasserverteilungssystemen;
jedoch mit Ausnahme gefährlicher Industrieschlämme.

Caractérisation des boues - Gestion des boues en vue de leur valorisation ou de leur élimination

La présente spécification technique donne des recommandations pour la gestion de la production et de la maîtrise des boues en relation avec les effluents à traiter et le traitement des boues, et fournit une évaluation stratégique des options de valorisation, de recyclage et d'élimination en fonction de leurs propriétés et de la disponibilité des débouchés.
La présente Spécification Technique est applicable aux boues provenant :
-   du traitement des eaux pluviales ;
-   des matières de vidange ;
-   des systèmes de collecte des eaux usées urbaines ;
-   des stations d'épuration des eaux usées urbaines ;
-   des stations d'épuration des eaux industrielles assimilées (telles que définies par la Directive européenne 91/271/CE [1]) ;
-   des stations de traitement de l'eau potable ;
à l'exclusion des boues industrielles dangereuses.

Karakterizacija blata - Ravnanje z blatom pri uporabi ali odlaganju

To tehnično poročilo podaja smernice za obravnavo proizvodnje in nadzora nad blatom glede na vnose in obdelavo ter podaja strateško vrednotenje možnosti glede predelave, reciklaže in odlaganja za blato v skladu z njegovimi značilnostmi in uporabnostjo za trge. To poročilo velja za blato iz: - ravnanja z vodo ob neurjih; - vsebine greznice; - komunalnih odpadnih vod iz kanalizacijskih sistemov; - čistilnih naprav za komunalno odpadno vodo; - obravnavanja industrijske odpadne vode na podoben način kot komunalne odpadne vode (kot je opredeljeno v Direktivi 91/271/EGS); - čistilnih naprav za sistem oskrbe z vodo; vendar ne iz nevarnega blata iz industrije.

General Information

Status
Published
Public Enquiry End Date
30-Jun-2012
Publication Date
25-Aug-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Jul-2013
Due Date
15-Sep-2013
Completion Date
26-Aug-2013

Relations

Buy Standard

Technical specification
TS CEN/TS 13714:2013
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 13714:2013
01-september-2013
1DGRPHãþD
SIST-TP CEN/TR 13714:2010
Karakterizacija blata - Ravnanje z blatom pri uporabi ali odlaganju
Characterization of sludges - Sludge management in relation to use or disposal
Charakterisierung von Schlämmen - Management von Schlamm zur Verwertung oder
Beseitigung
Caractérisation des boues - Gestion des boues en vue de leur valorisation ou de leur
élimination
Ta slovenski standard je istoveten z: CEN/TS 13714:2013
ICS:
13.030.20 7HNRþLRGSDGNL%ODWR Liquid wastes. Sludge
SIST-TS CEN/TS 13714:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 13714:2013

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 13714:2013


TECHNICAL SPECIFICATION
CEN/TS 13714

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
July 2013
ICS 77.060; 93.140 Supersedes CEN/TR 13714:2010
English Version
Characterization of sludges - Sludge management in relation to
use or disposal
Caractérisation des boues - Gestion des boues en vue de Charakterisierung von Schlämmen - Management von
leur valorisation ou de leur élimination Schlamm zur Verwertung oder Beseitigung
This Technical Specification (CEN/TS) was approved by CEN on 27 August 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13714:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
Contents Page
Foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 7
4 Waste hierarchy . 8
4.1 General . 8
4.2 Context . 9
5 Management of sludge quality - Upstream processes . 9
5.1 General . 9
5.2 Municipal wastewater sludges . 9
5.3 Setting limits for discharges from industrial and commercial premises to municipal
sewers . 10
5.4 Other factors . 10
5.4.1 General . 10
5.4.2 Protection of biological municipal wastewater treatment processes . 11
5.4.3 Protection of biological sludge treatment processes. 11
5.4.4 Protection of environmental quality in the receiving watercourse . 11
5.4.5 Protection of sewer fabric . 11
5.4.6 Protection of sewer maintenance workers. 11
5.5 Minimising contamination including diffuse sources in municipal wastewater . 11
6 Sludge management . 12
6.1 Measures upstream of water and wastewater treatment facilities . 12
6.1.1 Source prevention . 12
6.1.2 Source reduction . 12
6.2 Measures at sites of sludge production and processing . 12
6.2.1 Water and Wastewater treatment processes . 12
6.2.2 Sludge treatment . 12
6.3 Solutions for recycling recovery and disposal . 14
6.3.1 General . 14
6.3.2 Application to land (see CEN/TR 13097 [16] and CEN/TR 13983 [17]) . 14
6.3.3 Other uses . 14
6.3.4 Energy recovery . 14
6.3.5 Component recovery . 15
6.4 Disposal . 15
7 Operational good practices . 16
7.1 General . 16
7.2 Upstream of the sludge production site . 16
7.2.1 General . 16
7.2.2 Communication process between all participants upstream of the sludge production . 16
7.2.3 Sewerage system structure improvement and maintenance . 16
7.3 At the sludge production site . 17
7.3.1 General . 17
7.3.2 General guidelines for operations . 17
7.3.3 Storage . 17
7.3.4 Site access . 18
8 Strategic evaluation of options and links with the other good practice documents . 18
2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
8.1 General .1 8
8.2 Sludge quantity assessment.1 8
8.3 Sludge quality . 18
8.4 Developing a strategy for sludge use/disposal .1 9
Annex A (informative) Best Practicable Environmental Option for sludges use or disposal . 20
Annex B (informative) Environmental checklist .2 1
Bibliography .2 3

3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
Foreword
This document (CEN/TS 13714:2013) has been prepared by Technical Committee CEN/TC 308
“Characterization of sludges”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TR 13714:2010.
This document gives recommendations for good practice, but existing national regulations remain in force.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
4

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
Introduction
The purpose of this Technical Specification is to outline the management of sludges both upstream and
downstream of the treatment process to ensure that it is suitable for the outlets available. Sludge is the
inevitable residue of treating raw potable water and municipal and industrial wastewaters. This Technical
Specification refers to all types of sludge covered by CEN/TC 308 including sludges from treating industrial
wastewater similar to urban wastewater and from water supply treatment work plants. In considering the likely
quality of sludges, it should be remembered that municipal wastewater sludges are composed of materials
that have already been disposed of and are consequently likely to be more variable than many industrial
sludges that arise from sourced materials or water treatment sludges arising from surface water or
groundwater.
The quality of the sludge should match the requirements of the outlets whether that be to land, thermal
processing or as a last resort landfill. As a general rule a high quality sludge is likely to be acceptable to a
large range of outlets giving greater operational flexibility. High quality sludges are likely to be suitable for
those outlets associated with maximum sustainability and minimum environmental pollution. The management
of sludges will become increasingly more complex as environmental standards become more stringent and if
outlets become more constrained by legislation and public attitudes.
Sludge quality is central to the development of good practice for sludge production in relation to its destination
(use or disposal). Sludge quality depends on the composition of the upstream materials and the type of
treatment including post treatment storage.
Sludge quality can be characterised by its different properties; biological, chemical and physical:
a) biological properties include the microbiological stability of the organic matter in the sludge, odour and
hygienic characteristics;
b) chemical properties include:
1) content of potentially toxic substances (PTSs) which include inorganic (metals, metalloids, and other
minerals), and organic pollutants;
2) concentrations and form (availability) of plant nutrients and the main components of the sludge;
c) physical properties include whether liquid, semi-solid (pasty-like) or solid, and aesthetic factors
associated for instance with removal of unsightly debris by effective screening. Calorific value is a quality
criterion if the sludge is to be incinerated or used as a fuel. Other physical properties include,
thickenability and dewaterability.
The consistency of these different properties is a critical aspect of the sludge quality and of the ability to
determine its end destination (use or disposal).
Standard methods should be used where these are available to measure the quality parameters of sludge.
There is a continuing need to develop a full set of standardised and harmonised methods which the manager
and operator can use to evaluate the quality of sludge for treatment process design and operational purposes.
This Technical Specification considers the management of sludges against the waste hierarchy, the
management of sludge quality and an option evaluation process to determine the options available.
5

---------------------- Page: 7 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)

Figure 1 — A basic scheme for deciding on sewage sludge use/disposal options and the relevant
CEN/TC 308 guidance documents
6

---------------------- Page: 8 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
1 Scope
This Technical Specification gives guidance for dealing with the production and control of sludge in relation
to inputs and treatment and gives a strategic evaluation of recovery, recycling and disposal options for
sludge according to its properties and the availability of outlets.
This Technical Specification is applicable for sludges from:
 storm water handling;
 night soil;
 urban wastewater collecting systems;
 urban wastewater treatment plants;
 treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EC [1]);
 water supply treatment plants;
but excluding hazardous sludges from industry.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 1085:2007, Wastewater treatment — Vocabulary
EN 12832:1999, Characterization of sludges — Utilization and disposal of sludges — Vocabulary
3 Terms and definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1085:2007 and EN 12832:1999 and
the following apply.
3.1.1
industrial wastewater
trade wastewater
trade effluent
wastewater discharge resulting from any industrial or commercial activity
3.1.2
urban wastewater
municipal wastewater
wastewater from municipal areas consisting predominantly of domestic wastewater and which may
additionally contain surface water, infiltration water, trade or industrial wastewater
3.2 Abbreviated terms
The following abbreviated terms, necessary for the understanding of this specification, apply:
 BOD: Biochemical Oxygen Demand
7

---------------------- Page: 9 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
 BPEO: Best Practicable Environmental Option
 COD: Chemical Oxygen Demand
 EQO/EQS: Environmental Quality Objectives/Environmental Quality Standards
 PTS: Potentially Toxic Substance
4 Waste hierarchy
4.1 General
In order that the management of waste be conducted in an increasingly sustainable manner, the EU
encourages a waste hierarchy as a framework by which Member States should develop their strategy for
waste management (EU Directive 75/442/EEC (see [2]) as amended by 91/156/EEC (see [3])).

Figure 2 — The waste hierarchy — Including sludges
This hierarchy encourages:
a) firstly, the prevention or reduction of waste production and its harmfulness, in particular by:
1) development and implementation of clean technologies more sparing in their use of natural
resources;
2) technical development and marketing of products designed so as to make no contribution or to make
the smallest possible contribution, by the nature of their manufacture, use or final disposal, to
increasing the amount or harmfulness of waste and pollution hazards;
3) development of appropriate techniques for the final disposal of dangerous substances contained in
waste destined for recovery;
b) secondly, the best possible use of waste:
1) recovery of waste by means of recycling, re-use or reclamation or any other process with a view to
extracting secondary raw materials;
2) or the use of waste as a source of energy.
The hierarchy places disposal as the last management choice.
8

---------------------- Page: 10 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
Four of the stages within the hierarchy can be applied to sludges, namely reduction, recycling, recovery and
disposal. Obviously, the latter is the least desirable and efforts should be made to minimise the proportion of
sludge which is disposed of, by the adoption of clean technologies, recycling and recovery strategies.
The waste hierarchy can be applied equally to activities upstream of the sludge production process and to the
processes employed within the treatment process. These are discussed separately below. In considering what
management options should be selected, all stages in the sequence of sludge production and its ultimate fate
should be scrutinised.
4.2 Context
The overall objective of a sludge management strategy should be to find outlets for the sludge which are safe,
environmentally acceptable (carbon foot print), secure and economic. The availability of outlets (see Clause 8)
determines how sludge should be treated.
In order to do this, it is important to address quality (Clause 5) and management processes (Clause 6) and
operational practices (Clause 7).
5 Management of sludge quality - Upstream processes
5.1 General
The significant difference between municipal sludges and industrial sludges and to a certain extent water
treatment sludges is the degree and complexity of control over the inputs.
Industrial sludges usually arise from the processing of sourced materials and control over their content and
consequently the quality of sludge can often be made by analysis of the materials and in many cases by the
imposition of quality standards on them. This may not always be possible for instance in the amount of
bacteriocides and fungicides in paper waste collected for recycling which could vary from batch to batch. River
waters can carry a range of pollutants which could enter the sludge and operators should be aware of the
potential pollutants that could enter the river upstream.
5.2 Municipal wastewater sludges
For municipal wastewater sludges strict limits should be imposed on industrial and commercial discharges to
the sewer so that the sludge produced from wastewater is ‘clean’ or as free as possible of contaminants of
industrial origin.
Industrial point sources of contaminants discharging to the sewer should be identified and restricted or
stopped. Key factors are careful discharge consent settings (see below) monitoring and inspection backed by
enforcement. Quality assurance in support of the consent requires adequate sampling to check compliance.
The extent of sampling of effluent from industrial premises should be decided on a risk assessment basis
taking account for instance of size of operation and quantity of chemicals in use.
The "polluter pays" principle should be used to oblige industries failing to produce acceptable effluents to
investigate and implement remedial measures. This may entail a change in the production process or the
installation on the industrial premises of effluent treatment plant. Often the cost of this is offset by reduced
payments for effluent discharge and the recovery and reuse of valuable chemicals that would otherwise have
been discharged to the sewer. Experience has shown that by progressively identifying and controlling point
source discharges, the quality of sludge can be substantially improved by reducing its content of PTS.
Emergency planning should make provisions to deal with accidental discharges of large amounts of polluting
chemicals to the sewer so that contamination of sludge is minimised, and the biological treatment processes
of wastewater and sludge are protected.
Conventional wastewater treatments remove most of the organic polluting load of the wastewater; this is
measured in terms of BOD or COD. These processes also transfer much of the non-treatable polluting load,
consisting of non-degradable or persistent residues, out of the wastewater and into the sludge. This is
9

---------------------- Page: 11 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
advantageous for the production of clean effluent but if the wastewater contains significant levels of
contaminants of industrial origin then these contaminants are likely to be found in the sludge at levels, which
affect its environmental suitability for use and disposal outlets. Some of the PTS contained in an untreated
wastewater is found in the sludge after treatment. The percentage of the wastewater load of PTS transferred
into sludge depends on many parameters, such as the wastewater and sludge treatment process, pH, solids
content, and PTS content.
5.3 Setting limits for discharges from industrial and commercial premises to municipal
sewers
The use of public wastewater systems is regulated by the operators according to the relevant legislation in
place in all the EU Member States and through by-laws, public law agreement or private law operating
conditions.
The EU legislation covering the control of potentially toxic substances in discharges to the aquatic
environment is Directive 2006/11/EC [4] and Directive 2000/60/EC [5] known as the Water Framework
Directive (WFD). These directives should therefore be the springboard for controlling the discharge of toxic
and harmful materials from industry and commercial activities. There should be an effective control of the
discharge from the wastewater treatment process and the quality of the sludge emanating from it.
Directive 2006/11/EC [4] introduces two lists of 132 dangerous substances to limit discharges from industrial
and commercial premises:
 List 1 Substances (e.g. mercury, cadmium, organophosphorus compounds and organochlorine
compounds) should be removed as completely as possible from all industrial wastewater discharges
using the best available technology (BAT). Whenever possible, List 1 substances should be replaced by
more benign and less toxic alternatives.
 List 2 Substances (e.g. copper, chromium, zinc, and nickel) should be reduced in discharges by the
application of the "Best Available Technology Not Entailing Excessive Cost" with respect to the level of
environmental risks. A cost/benefit analysis is therefore an essential element in deciding the appropriate
level of treatment.
Annex 10 of Directive 2000/60/EC [5] sets out a list of 33 priority substances or group of substances selected
amongst those which present a significant risk to or via the aquatic environment. For those pollutants, specific
control measures are required that aim for the progressive reduction and for 11 priority hazardous substances
the cessation or phasing-out of discharges, emissions and losses.
Directive 2008/105/EC [6] amending the Water Framework Directive 2000/60/EC (WFD) establishes
environmental quality standards for priority substances and other substances from Directive 2006/11/EC [4].
Reduction of the pollution by these substances shall be assessed through inventories of their discharges,
emissions and losses. This text also proposes a list of 13 substances for their identification as priority or
hazardous priority substances. Directive 2006/11/EC [4] is repealed by the WFD as from the end of 2013.
Requirements for these dangerous substances are the subject of varying national regulations. In all cases,
dangerous substances should be reduced at source as far as possible by suitable pre-treatment of the
industrial waste stream prior to discharge to sewer.
Improvements in environmental protection as regards both sludge recycling or disposal, and discharges from
treatment plants to the watercourse, require the periodic review of industrial and commercial discharge permit
conditions.
5.4 Other factors
5.4.1 General
Factors additional to sludge quality have to be considered in setting limits for chemicals in industrial
discharges to the sewer. These are given below.
10

---------------------- Page: 12 ----------------------

SIST-TS CEN/TS 13714:2013
CEN/TS 13714:2013 (E)
5.4.2 Protection of biological municipal wastewater treatment processes
Biological processes depending on the action of bacteria and other micro-organisms include biofilm processes
and activated sludge. The chosen threshold values for individual contaminants from industrial and commercial
discharges should be protective enough to avoid damage to the biota with the consequent failure of the
biological wastewater processes.
5.4.3 Protection of biological sludge treatment processes
This normally applies to anaerobic digestion but also to sludge treated by aerobic processes such as
composting. Heavy metals and organic contaminants such as pentachlorophenol have been found to inhibit
anaerobic digestion of sludge.
It is not easy to designate threshold values for individual contaminants above which biological wastewater or
sludge treatment processes may fail because this depends also on the composition of the wastewater,
operating conditions and whether the plant is acclimatised to the contaminant. It is now the case that in order
to meet sludge quality requirements for use or disposal, concentrations of PTS in wastewater shall be
restricted to levels below those which would be expected to adversely affect biological wastewater, sludge
treatment processes or subsequent use of the liquid.
5.4.4 Protection of environmental quality in the receiving watercourse
The maximum permissible concentrations of substances discharged to the wastewater given by the national
regulations have to be related to the standards set for the final discharge effluent from the wastewater
treatment works including storm water overflows from the sewerage system, and those for the receiving
watercourse.
5.4.5 Protection of sewer fabric
This is usually controlled by limits for the acidity, alkalinity and temperature of discharges and their content of
sulphate and sulphide.
5.4.6 Protection of sewer maintenance workers
Personnel should observe the normal rules of hygiene and it is necessary that chemicals which could
generate toxic fumes in the sewer are strictly controlled.
5.5 Minimising contamination including diffuse sources in municipal wastewater
There are sources of contamination of municipal wastewater and sludge other than industrial and commercial
discharges to the sewer. These are inputs among others from domestic sources and from runoff from roads,
etc. and they are diffuse and less readily controlled than point source inputs.
A programme of public education to minimise discharge of unsuitable substa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.