iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 14505-2:2007/AC:2009

(Corrigendum)

Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)

Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)

ISO - Taking over of an ISO Technical Corrigendum

Ergonomie der thermischen Umgebung - Beurteilung der thermischen Umgebung in Fahrzeugen - Teil 2: Bestimmung der Äquivalenttemperatur (ISO 14505-2:2006/Cor 1:2007)

Ergonomie des ambiances thermiques - Évaluation des ambiances thermiques dans les véhicules - Partie 2: Détermination de la température équivalente (ISO 14505-2:2006/Cor 1:2007)

Ergonomija toplotnega okolja - Vrednotenje toplotnega okolja v vozilih - 2. del: Ugotavljanje ekvivalentne temperature (ISO 14505-2:2006/Cor 1:2007)

General Information

Status
Published
Publication Date
26-May-2009
ICS
13.180 - Ergonomics
43.020 - Road vehicles in general
Technical Committee
VSN - Safety of machinery
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-May-2009
Due Date
19-Jul-2009
Completion Date
27-May-2009
Ref Project
EN ISO 14505-2:2006/AC:2009 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)

Relations

Corrects
SIST EN ISO 14505-2:2007 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
Effective Date
22-Dec-2008

Buy Standard

EN ISO 14505-2:2007/AC:2009EN ISO 14505-2:2007/AC:2009
PreviousNext
Corrigendum
EN ISO 14505-2:2007/AC:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ergonomija toplotnega okolja - Vrednotenje toplotnega okolja v vozilih - 2. del: Ugotavljanje ekvivalentne temperature (ISO 14505-2:2006/Cor 1:2007)Ergonomie der thermischen Umgebung - Beurteilung der thermischen Umgebung in Fahrzeugen - Teil 2: Bestimmung der Äquivalenttemperatur (ISO 14505-2:2006/Cor 1:2007)Ergonomie des ambiances thermiques - Évaluation des ambiances thermiques dans les véhicules - Partie 2: Détermination de la température équivalente (ISO 14505-2:2006/Cor 1:2007)Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)43.020Cestna vozila na splošnoRoad vehicles in general13.180ErgonomijaErgonomicsICS:Ta slovenski standard je istoveten z:EN ISO 14505-2:2006/AC:2009SIST EN ISO 14505-2:2007/AC:2009en01-julij-2009SIST EN ISO 14505-2:2007/AC:2009SLOVENSKI
STANDARD



SIST EN ISO 14505-2:2007/AC:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14505-2:2006/ACApril 2009Avril 2009April 2009ICS 13.180; 43.020English versionVersion FrançaiseDeutsche FassungErgonomics of the thermal environment - Evaluation of thermalenvironments in vehicles - Part 2: Determination of equivalent temperature(ISO 14505-2:2006/Cor 1:2007)Ergonomie des ambiances thermiques -Évaluation des ambiances thermiques dansles véhicules - Partie 2: Détermination de latempérature équivalente (ISO 14505-2:2006/Cor 1:2007)Ergonomie der thermischen Umgebung -Beurteilung der thermischen Umgebung inFahrzeugen - Teil 2: Bestimmung derÄquivalenttemperatur (ISO 14505-2:2006/Cor 1:2007)This corrigendum becomes effective on 29 April 2009 for incorporation in the official German andEnglish versions of the EN.Ce corrigendum prendra effet le 29 avril 2009 pour incorporation dans les versions officiellesallemande et anglaise de la EN.Die Berichtigung tritt am 29.April 2009 zur Einarbeitung in die offizielle Deutsche und EnglischeFassung der EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14505-2:2007(Main)
Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
EN ISO 14505-2:2006

This part of ISO 14505 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is primarily intended for assessment of thermal conditions, when deviations from thermal neutrality are relatively small. Appropriate methodology as given in this par t of ISO 14505 can be chosen for inclusion in specific performance standards for testing of HVAC-systems for vehicles and similar confined spaces.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14505-3:2006(Main)
Ergonomics of the thermal environment - Evaluation of the thermal environment in vehicles - Part 3: Evaluation of thermal comfort using human subjects (ISO 14505-3:2006)
EN ISO 14505-3:2006

This part of ISO 14505 gives guidelines and specifies a standard test method for the assessment, using human subjects, of thermal comfort in vehicles. It is not restricted to any particular vehicle but provides the general principles that allow assessment and evaluation. The method can be used to determine a measure of the performance of a vehicle for conditions of interest, in terms of whether it provides thermal comfort to people or not. This can be used in vehicle development and evaluation. This part of ISO 14505 is applicable to all types of vehicles, including cars, buses, trucks, off-road vehicles, trains, aircraft, ships, submarines, and to the cabins of cranes and similar spaces. It applies where people are enclosed in a vehicle and when they are exposed to outside conditions. For those exposed to outside conditions, such as riders of bicycles or motorcycles, drivers of open sports cars and operators of fork lift trucks without cabins, vehicle speed and weather conditions can dominate responses. The principles of assessment, however, will still apply. This part of ISO 14505 applies to both passengers and operators of vehicles where its application does not interfere with the safe operation of the vehicle. It presents the principles of the assessment and evaluation of thermal comfort, including the use of test methods and trials. It also presents subjective methods that can be used in assessment. This part of ISO 14505 is a basic ergonomics standard which can contribute to the development of standards concerned with specific vehicles and products.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14505-2:2007(Main)
Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
EN ISO 14505-2:2006

This part of ISO 14505 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is primarily intended for assessment of thermal conditions, when deviations from thermal neutrality are relatively small. Appropriate methodology as given in this par t of ISO 14505 can be chosen for inclusion in specific performance standards for testing of HVAC-systems for vehicles and similar confined spaces.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14505-3:2006(Main)
Ergonomics of the thermal environment - Evaluation of the thermal environment in vehicles - Part 3: Evaluation of thermal comfort using human subjects (ISO 14505-3:2006)
EN ISO 14505-3:2006

This part of ISO 14505 gives guidelines and specifies a standard test method for the assessment, using human subjects, of thermal comfort in vehicles. It is not restricted to any particular vehicle but provides the general principles that allow assessment and evaluation. The method can be used to determine a measure of the performance of a vehicle for conditions of interest, in terms of whether it provides thermal comfort to people or not. This can be used in vehicle development and evaluation. This part of ISO 14505 is applicable to all types of vehicles, including cars, buses, trucks, off-road vehicles, trains, aircraft, ships, submarines, and to the cabins of cranes and similar spaces. It applies where people are enclosed in a vehicle and when they are exposed to outside conditions. For those exposed to outside conditions, such as riders of bicycles or motorcycles, drivers of open sports cars and operators of fork lift trucks without cabins, vehicle speed and weather conditions can dominate responses. The principles of assessment, however, will still apply. This part of ISO 14505 applies to both passengers and operators of vehicles where its application does not interfere with the safe operation of the vehicle. It presents the principles of the assessment and evaluation of thermal comfort, including the use of test methods and trials. It also presents subjective methods that can be used in assessment. This part of ISO 14505 is a basic ergonomics standard which can contribute to the development of standards concerned with specific vehicles and products.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-4:2021/AC:2023(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
EN IEC 63044-4:2021/AC:2023-07
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day