Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D <= 250 mm

This standard specifies the requirements relating to:
Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D ? 250 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2602 (X4NiCrTiMoV26-15) - Nicht wärmebehandelt, Schmiedevormaterial a oder D <= 250 mm

Diese Norm legt die Anforderungen an
Hochwarmfeste Legierung FE-PA2602
(X4NiCrTiMoV26-15)
Nicht wärmebehandelt,
Schmiedevormaterial
a oder D ≤ 250 mm
für die Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant a chaud FE-PA2602 (X4NiCrTiMoV26-15) - Non traité, produits destinés a la forge a ou D <= 250 mm

Aeronavtika - Zlitina FE-PA2602 (X4NiCrTiMoV26-15), odporna proti vročini - Toplotno neobdelani materiali za kovanje a ali D <= 250 mm

General Information

Status
Published
Publication Date
03-Oct-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Sep-2007
Due Date
26-Nov-2007
Completion Date
04-Oct-2007

Buy Standard

Standard
EN 4314:2007
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D <= 250 mmSérie aérospatiale - Alliage résistant a chaud FE-PA2602 (X4NiCrTiMoV26-15) - Non traité, produits destinés a la forge a ou D <= 250 mmLuft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2602 (X4NiCrTiMoV26-15) - Nicht wärmebehandelt, Schmiedevormaterial a oder D <= 250 mmTa slovenski standard je istoveten z:EN 4314:2007SIST EN 4314:2007en49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:SLOVENSKI
STANDARDSIST EN 4314:200701-november-2007







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4314
August 2007 ICS 49.025.05 English Version
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 250 mm
Série aérospatiale - Alliage résistant à chaud FE-PA2602 (X4NiCrTiMoV26-15) - Non traité, produits destinés à la forge a ou D ≤ 250 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2602 (X4NiCrTiMoV26-15) - Nicht wärmebehandelt, Schmiedevormaterial a oder D ≤ 250 mm This European Standard was approved by CEN on 15 March 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4314:2007: E



EN 4314:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4



EN 4314:2007 (E) 3 Foreword This document (EN 4314:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. Attention is drawn to the possibility that som
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.