SIST EN IEC 62037-2:2022

SLOVENSKI STANDARD
SIST EN IEC 62037-2:2022
01-marec-2022
Nadomešča:
SIST EN 62037-2:2013
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve
intermodulacijskega nivoja - 2. del: Meritve pasivne intermodulacije v koaksialnih
kabelskih sestavih (IEC 62037-2:2021)
Passive RF and microwave devices, intermodulation level measurement - Part 2:
Measurement of passive intermodulation in coaxial cable assemblies (IEC 62037-
2:2021)
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 2:
Messung der passiven Intermodulation in konfektionierten Koaxialkabeln (IEC 62037-
2:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 2:
Mesure de l’intermodulation passive dans les cordons coaxiaux (IEC 62037-2:2021)
Ta slovenski standard je istoveten z: EN IEC 62037-2:2021
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
SIST EN IEC 62037-2:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62037-2:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 62037-2:2022


EUROPEAN STANDARD EN IEC 62037-2

NORME EUROPÉENNE

EUROPÄISCHE NORM December 2021
ICS 33.040.20; 33.120.10 Supersedes EN 62037-2:2013 and all of its amendments
and corrigenda (if any)
English Version
Passive RF and microwave devices, intermodulation level
measurement - Part 2: Measurement of passive intermodulation
in coaxial cable assemblies
(IEC 62037-2:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau Passive HF- und Mikrowellenbauteile, Messung des
d'intermodulation - Partie 2: Mesure de l'intermodulation Intermodulationspegels - Teil 2: Messung der passiven
passive dans les cordons coaxiaux Intermodulation in konfektionierten Koaxialkabeln
(IEC 62037-2:2021) (IEC 62037-2:2021)
This European Standard was approved by CENELEC on 2021-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62037-2:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62037-2:2022
EN IEC 62037-2:2021 (E)
European foreword
The text of document 46/835/FDIS, future edition 2 of IEC 62037-2, prepared by IEC/TC 46 “Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62037-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–12–23
document have to be withdrawn

This document supersedes EN 62037-2:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62037-2:2021 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62037-2:2022
EN IEC 62037-2:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62037-1 2021 Passive RF and microwave devices, EN IEC 62037-1 2021
intermodulation level measurement - Part
1: General requirements and measuring
methods
IEC 62037-3 - Passive RF and microwave devices, EN IEC 62037-3 -
intermodulation level measurement - Part
3: Measurement of passive intermodulation
in coaxial connectors
IEC 62037-4 - Passive RF and microwave devices, EN 62037-4 -
intermodulation level measurement - Part
4: Measurement of passive intermodulation
in coaxial cables


3

---------------------- Page: 5 ----------------------
SIST EN IEC 62037-2:2022

---------------------- Page: 6 ----------------------
SIST EN IEC 62037-2:2022




IEC 62037-2

®


Edition 2.0 2021-11




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE
colour

inside










Passive RF and microwave devices, intermodulation level measurement –

Part 2: Measurement of passive intermodulation in coaxial cable assemblies



Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation –

Partie 2: Mesure de l’intermodulation passive dans les cordons coaxiaux
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.040.20; 33.120.10 ISBN 978-2-8322-1048-1




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 62037-2:2022
– 2 – IEC 62037-2:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 5
3.1 Terms and definitions . 5
3.2 Abbreviations . 5
4 Test method . 6
4.1 General . 6
4.2 Test conditions . 6
5 Procedure . 8
6 Report . 8

Figure 1 – PIM test set-up example . 7
Figure 2 – Rotation of cable . 7

---------------------- Page: 8 ----------------------
SIST EN IEC 62037-2:2022
IEC 62037-2:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PASSIVE RF AND MICROWAVE DEVICES,
INTERMODULATION LEVEL MEASUREMENT –

Part 2: Measurement of passive intermodulation
in coaxial cable assemblies

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Public
...