Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods

This European Standard specifies test methods. It is applicable to theatrical pyrotechnic articles which are classified in categories T2, T1 outdoor and T1 indoor according to Part 2.

Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Bühne und Theater - Teil 5: Prüfverfahren

Diese Europäische Norm legt Prüfverfahren fest. Sie ist für pyrotechnische Gegenstände für Bühne und Theater der Kategorie T1 und T2 nach prEN  16256-2 anwendbar.
ANMERKUNG   In diesem Dokument wird der Begriff „pyrotechnische Gegenstände für Bühne und Theater“ durch „Gegenstände“ abgekürzt.

Articles pyrotechniques - Articles pyrotechniques destinés au théâtre - Partie 5: Méthodes d'essai

La présente Norme européenne spécifie des méthodes d'essai. Elle est applicable aux articles pyrotechniques pour le théâtre des catégories T1 et T2 conformément au prEN 16256-2.
NOTE   Dans le présent document, les « articles pyrotechniques pour le théâtre » seront désignés par le terme « articles ».

Pirotehnični izdelki - Pirotehnični izdelki za gledališče - 5. del: Preskusne metode

Ta evropski standard določa preskusne metode. Uporablja se za pirotehnične izdelke za gledališče kategorij T1 in T2 v skladu s standardom 16256-2.

General Information

Status
Published
Public Enquiry End Date
24-Jun-2011
Publication Date
17-Apr-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Apr-2013
Due Date
15-Jun-2013
Completion Date
18-Apr-2013

Buy Standard

Standard
EN 16256-5:2013
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Bühne und Theater - Teil 5: PrüfverfahrenArticles pyrotechniques - Articles pyrotechniques destinés au théâtre - Partie 5: Méthodes d'essaiPyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods97.200.10Gledališka, odrska in studijska oprema ter delovne postajeTheatre, stage and studio equipment71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 16256-5:2012SIST EN 16256-5:2013en,fr,de01-junij-2013SIST EN 16256-5:2013SLOVENSKI
STANDARD



SIST EN 16256-5:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16256-5
December 2012 ICS 71.100.30 English Version
Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
Articles pyrotechniques - Articles pyrotechniques destinés au théâtre - Partie 5: Méthodes d'essai
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Bühne und Theater - Teil 5: PrüfverfahrenThis European Standard was approved by CEN on 3 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16256-5:2012: ESIST EN 16256-5:2013



EN 16256-5:2012 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Test environment .5 4.1 General .5 4.2 Indoor .5 4.3 Outdoor .5 5 Apparatus .6 5.1 General .6 5.2 Timing device .6 5.3 Calliper .6 5.4 Ruler .6 5.5 Measuring tape .6 5.6 Wind speed meter .6 5.7 Masses including clamping device .6 5.8 Balance .6 5.9 Abrasive sheet .6 5.10 Temperature chamber .6 5.11 Clamping device .7 5.12 Devices for measuring of Effect-, Rising/Bursting-, Drop Height .7 5.13 Sound level meter .7 5.14 Shock apparatus .7 5.15 Goniometer .7 5.16 Frame .7 5.17 Ignition source .8 5.18 Transparent type size sheet .8 5.19 Striking surface .8 5.20 Burning time measurement – mould device .8 6 Test methods .8 6.1 Construction and stability .9 6.2 Design – Verification . 10 6.3 Angle of ascent, effect-, rising/bursting-, drop height . 11 6.4 Measurement of sound pressure level . 11 6.5 Timing measurement . 12 SIST EN 16256-5:2013



EN 16256-5:2012 (E) 3 6.6 Measuring of labelling . 13 6.7 Extinguishing of flames . 13 6.8 Burning rate of composition . 13 6.9 Projected Debris . 13 6.10 Incandescent matter . 13 6.11 Visual and Audible Inspections . 14 6.12 Mechanical conditioning . 14 6.13 Thermal conditioning . 14 6.14 Striking surface test . 15 6.15 Function test . 15 6.16 Determination of tube angle . 15 Annex A (informative)
Mechanical Conditioning (Shock Apparatus) . 17 Annex B (informative)
Calculation methods for the angle of ascent, effect-, rising/bursting-, drop height . 20 Annex C (informative)
Calculation method for minimum safety distance . 24 Annex D (informative)
Overview of essential safety requirements and corresponding clauses of all parts of this European Standard . 25 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2007/23/EC on the placing on the market of pyrotechnic articles . 26 Bibliography . 27
SIST EN 16256-5:2013



EN 16256-5:2012 (E) 4 Foreword This document (EN 16256-5:2012) has been prepared by Technical Committee CEN/TC 212 “Pyrotechnic articles”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is one of the series of standards as listed below:  EN 16256-1, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 1: Terminology  EN 16256-2, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 2: Categories of theatrical pyrotechnic articles  EN 16256-3, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 3: Requirements for construction and performance
 EN 16256-4, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 4: Minimum labelling requirements and instructions for use  EN 16256-5, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 5: Test methods CEN/TC 212 has also developed European Standards for:  Pyrotechnic articles — Fireworks Categories 1, 2 and 3  Pyrotechnic articles — Fireworks, Category 4  Pyrotechnic articles — Pyrotechnic articles for vehicles
 Pyrotechnic articles — Other pyrotechnic articles According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16256-5:2013



EN 16256-5:2012 (E) 5 1 Scope This European Standard specifies test methods. It is applicable to theatrical pyrotechnic articles of the generic types defined in EN 16256-1:2012, Clause 3. NOTE In this document "Theatrical Pyrotechnic Articles" are referred to as "articles". 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16256-1:2012, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 1: Terminology EN 16256-3:2012, Pyrotechnic articles — Theatrical pyrotechnic articles — Part 3: Requirements for construction and performance EN 61672-1, Electroacoustics — Sound level meters — Part 1: Specifications (IEC 61672-1) EN ISO 13385-1, Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics (ISO 13385-1) ISO 6344-3, Coated abrasives — Grain size analysis — Part 3: Determination of grain size distribution of microgrits P240 to P2500 ISO 21948, Coated abrasives — Plain sheets 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16256-1:2012 apply. 4 Test environment 4.1 General
The test area shall be unobstructed and suitable for the accurate measurement of the required parameters. The test sample should be placed in the centre of the test area, as shown in the labelled instruction the manufacturers supplied or recommended equipment shall be used. 4.2 Indoor The test area shall be indoors.
The function test for articles for indoor use may be carried out outdoors: see 6.15.2. The test area shall be in an enclosed space, which is capable of limiting the movement of air. A means of extracting fumes shall be provided. 4.3 Outdoor The test area shall be an outdoor site. If applicable, provisions shall be made at the centre of the test area for partially burying into the ground. If applicable, insert support pole in the centre of the test area. The measurement of the windspeed (5.6) shall be started before starting the function test and continue SIST EN 16256-5:2013



EN 16256-5:2012 (E) 6 through the function test. A means of measuring the wind speed at a height of 1,5 m above the ground shall be provided. No performance testing shall be carried out if the wind speed exceeds 5,0 m/s. The test area shall be a clean, flat, horizontal, non-flammable and sound reflecting surface (for example concrete). For exceptions regarding the sound pressure level see 6.4. 5 Apparatus 5.1 General The described apparatuses are only examples: any equivalent apparatus with the same accuracy or better may be used. 5.2 Timing device 5.2.1 Timing device, capable of being read to the nearest 0,1 s. 5.2.2 Timing device, capable of being read to the nearest 1 min. 5.3 Calliper Calliper, flat faced vernier calliper reading to 0,1 mm, conforming to EN ISO 13385-1. 5.4 Ruler Ruler, reading to 1,0 mm. 5.5 Measuring tape Measuring tape, reading to 10 mm. 5.6 Wind speed meter The wind speed meter shall be capable of measuring with an accuracy of at least 0,5 m/s. 5.7 Masses including clamping device
5.7.1 100 g ±1,0 g total mass 5.7.2 500 g ±1,0 g total mass 5.8 Balance 5.8.1 Balance, reading to 0,1 g 5.8.2 Balance, reading to 0,01 g 5.9 Abrasive sheet Abrasive sheet at least 93 mm x 230 mm, conforming to ISO 21948, grit P240 measured in accordance with ISO 6344-3. 5.10 Temperature chamber 5.10.1 Up to (75 ± 2,5) °C SIST EN 16256-5:2013



EN 16256-5:2012 (E) 7 5.10.2 Up to (50 ± 2,5) °C 5.11 Clamping device Means of clamping to hold masses.
5.12 Devices for measuring of Effect-, Rising/Bursting-, Drop Height Universal surveying instruments (USI) for measuring horizontal and vertical angles (e. g. Theodolites, electronic spirit levels or video systems). 5.13 Sound level meter Sound level meter in accordance to class 1 of EN 61672-1 with free-field microphone. 5.14 Shock apparatus The apparatus shall provide a deceleration of 10050490+−m/ s² (when measured at the centre of an unloaded platform) and the shock impulse duration (time elapsed from the starting of the machine's deceleration to the time in which the deceleration reaches its maximum value during each first shock pulse) shall be 2 ms ± 1 ms working at a frequency of 1 Hz ± 0,1 Hz. An example of an apparatus is shown in Annex A. 5.15 Goniometer Goniometer, reading to 1° 5.16 Frame The frame should retain the test article consistently. To gauge the length of the handles, a clearly marked line should be marked at distances of 75 mm from the handle end of the frame. An example for determining the length of handles during the Batch Test is given in Figure 1. SIST EN 16256-5:2013



EN 16256-5:2012 (E) 8 Dimensions in millimeters
Key 1 frame 2 article Figure 1 — Example for determining length of handles (Batch test) 5.17 Ignition source Ignition source, capable of producing a small flame or of smouldering. 5.18 Transparent type size sheet Transparent sheet with the characters shown in Figure 2 printed on it in 2,1 mm text. The height of text determined by height of capital X in each case.
Figure 2 — Type sizes of print 5.19 Striking surface The primary pack is supplied with a striking surface for safety matches, resistant enough for the ignition of the content of one primary pack which is submitted to test. 5.20 Burning time measurement – mould device The test apparatus should be in accordance with Figure 33.2.1.4.1 of the "Recommendations on the Transport of Dangerous Goods – Manual of Tests and Criteria" (see [1]). Fill the apparatus in accordance with the description given in sub-clause 33.2.1.4.3.2.1 of the "Recommendations on the Transport of Dangerous Goods – Manual of Tests and Criteria" (see [1]), measure the burning time and calculate the burning rate by dividing the length in cm by the time in s. 6 Test methods NOTE These methods are only examples. Any equivalent method with the same sensitivity and the same accuracy or better can be used. SIST EN 16256-5:2013



EN 16256-5:2012 (E) 9 6.1 Construction and stability 6.1.1 Length of handle 6.1.1.1 Apparatus  Calliper (5.3);  Ruler (5.4);  Frame (5.16). 6.1.1.2 Procedure 6.1.1.2.1 Theatrical pyrotechnic with visible handle For type test measure and record the length of the uncoated end using the calliper (5.3) if the length of the handle is smaller than or equal to 75 mm or using the ruler (5.4) if the length exceeds 75 mm. For batch test measure the length of the uncoated end by using the calliper (5.3), the ruler (5.4) or the frame (5.16) to determine the length of the uncoated end and record if the length of uncoated end is within the requirements. If using the frame (5.16) place the articles with the handle in the frame and record the number of articles that have uncoated ends less than the required length. 6.1.1.2.2 Hand-held fountain without a separate handle Carry out using the articles that are used for determination of the net explosive content. Cut open the marked end of the articles case. Using calliper (5.3), measure and record the length of the articles case which is not filled with pyrotechnic composition to the nearest 1,0 mm. 6.1.2 Attachment of separate handle 6.1.2.1 Apparatus  Timing device (see 5.2.1);  Weight (5.7.2). 6.1.2.2 Procedure Secure the article in such a position that the handle is pointing vertically downwards. Securely attach the 500 g mass (5.7.2) to the handle. Using the timing device (5.2.1), determine and record the time until the handle becomes detached. If this time is longer than 10 s, stop the test and record that the time was greater than 10 s. 6.1.3 Length of item 6.1.3.1 Apparatus  Ruler (see 5.4). 6.1.3.2 Procedure Using the ruler, measure and record the total length of the test article to the nearest 1,0 mm. 6.1.4 Determination of calibre SIST EN 16256-5:2013



EN 16256-5:2012 (E) 10 6.1.4.1 Apparatus  Calliper (see 5.3). 6.1.4.2 Procedure Using the calliper (5.3), measure the inside diameter of the tube at least three times at different positions to the nearest 1,0 mm. Record the individual diameters and calculate the mean diameter. 6.1.5 Attachment of initial safety fuse 6.1.5.1 Apparatus  weight 100 g (see 5.7.1);  Timing device (see 5.2.1). 6.1.5.2 Procedure Secure the article in such a position that the initial safety fuse is pointing vertically downwards. Securely attach the 100 g mass (5.7.1) with a clamping device (5.11) to the initial safety fuse. Using the timing device (5.2.1), determine and record the time until the initial safety fuse becomes detached. If this time is longer than 10 s, stop the test and record that the time was greater than 10 s.
6.1.6 Resistance to ignition by an abrasive surface
6.1.6.1 Apparatus  Abrasive sheet (see 5.9). 6.1.6.2 Procedure Strike the friction head of the tested article in the test area (4.2 or 4.3) on the rough surface of the abrasive sheet (5.9). Record whether the friction head ignites. 6.2 Design – Verification 6.2.1 General These tests for type testing shall be done to verify that the tested article is in accordance with the requirements of EN 16256-3. For combinations one sample of each different pyrotechnic unit shall be inspected. 6.2.2 Conformity to drawings and part lists The tested article shall be in accordance with the relevant manufacturing drawing. The drawing shall show any relevant component e.g. pyrotechnic unit, with its dimensions, the masses of each pyrotechnic charge as well as the detailed pyrotechnic composition of the theatrical pyrotechnics article. Observe and record any nonconformity. 6.2.3 Pyrotechnic composition 6.2.3.1 Determination of net explosive content (NEC) SIST EN 16256-5:2013



EN 16256-5:2012 (E) 11 NOTE The total NEC excludes the powder weight of the initial fuses, transmitting fuses, friction or ignition heads. 6.2.3.1.1 Apparatus  Balance reading to 0,01 g (5.8.2);  Balance reading to 0,1 g (5.8.1). 6.2.3.1.2 Determination by dismantling Carefully dismantle the test article. Separate any pyrotechnic units and count them. Record the number of units containing report composition. Table 1 — Accuracy of weighing Mass of pyrotechnic composition Weigh to the nearest Using the balance ≤ 3,0 g 0,01 g
5.8.2 > 3,0 g 0,1 g
5.8.1
Weigh the pyrotechnic composition not contained in pyrotechnic unit(s) using the accuracy of weighing respectively the balance according to Table 1. Record the mass. If applicable, remove the pyrotechnic composition from each pyrotechnic unit, separate bursting charge, report charge and effect charge and weigh each portion. Record the mass of each portion.
6.3 Angle of ascent, effect-, rising/bursting-, drop height 6.3.1 Apparatus Universal surveying instruments (USI) in accordance with 5.12. 6.3.2 Procedure
The articles shall be fired vertically (firing device at 90° ± 2°). The measurement of heights may be made according to one of the methods as described in Annex B.
For articles that project pyrotechnic units beyond 30 m or contain pyrotechnic units that are self propelling, two measuring positions are required. For all other cases one measuring point is adequate. If two measuring points are necessary, vertical and horizontal angles shall be recorded. In case of one measuring point, at least the vertical angle shall be recorded. In order to achieve a reasonable accuracy, the distance between firing point and measurement location, referred to as base length here, has to be adjusted to the measurement device. The vertical angle should be within the range of 30° to 60° (optimal 45°). If the monitoring position(s) is / are not in the same horizontal plane as the article, appropriate corrections shall be made in the calculation of heights. Generally the measuring distance should be adapted to the article (height of ascent expected).
When using two positions for monitoring the height of ascent and angle of flight, they shall be positioned at a measured distance and at an angle of 90º to each other in relation to the article or a sufficient angle to assure a good validity of the measurement (depending on the method of measurement and calculation of the heights). 6.4 Measurement of sound pressure level SIST EN 16256-5:2013



EN 16256-5:2012 (E) 12 6.4.1 Apparatus  Sound level meter (5.13);  Measuring tape (5.5). 6.4.2 Procedure For articles where the distance at which the maximum A-weighted impulse sound pressure level is calculated to be 120 dB (AI) is less than half of the largest distance calculated from the other effect parameters based on type test measurements, the sound pressure level may be omitted from the batch test. In this case, the sound reflecting surface of the test area is not required. Set up the microphone of the sound level meter in the test area (4.3) at a distance of 8 m and at a height of 1,0 m. For articles with an effect height greater than 50 m set up the microphone at a distance that allows accurate measurement of the sound level and measure the distance to firing point with measuring tape (5.5). The sound level meter shall be oriented to the firing point. For line rockets set up the microphone of the sound level meter in the test area (4,3) at a distance of 8 m from the line, perpendicular to the direction of travel and at 50 % of the functioning length. Record the maximum A-weighted impulse sound pressure levels as measured by the sound level meter (5.13). The minimum safety distance depending on the sound pressure level can be calculated in accordance with Annex C.
6.5 Timing measurement 6.5.1 Apparatus  Timing device (5.2.1);  Ignition source (5.17). 6.5.2 Procedure 6.5.2.1 Ignition time Electric igniters may be fitted to the pyrotechnic article or supplied separately. If the igniter is supplied separately, insert it into the test article and ignite as indicated in the instructions for use. The igniter shall ignite the preliminary or main effect directly and without delay. The correct functioning of the electrical igniter shall be verified by visual or aural examination of the ignition in accordance with 6.11. 6.5.2.2 Non-electric ignition Remove any protection from the initial fuse and ignite in accordance with the instructions for use. Apply the ignition source (5.17) to the initial fuse and at the same instant, start the timing device (5.2.1). Stop the intermediate time at the moment the initial fuse ignites. If the initial fuse fails to ignite within the required time, record the fact and do not proceed with further testing of those articles. If the article has a friction head, strike it on the ignition source supplied with the article. If the article fails to ignite at the first strike, try it twice more. Record whether the article ignited or not. 6.5.2.3 Initial fuse time Initial fuse time shall be measured by using the timing device (5.2.1) and shall be recording from the moment the initial fuse ignites to the time the articles starts to produce its preliminary effect.
SIST EN 16256-5:2013



EN 16256-5:2012 (E) 13 6.6 Measuring of labelling 6.6.1 Apparatus  Calliper (5.3);  Transparent type size sheet (5.18). 6.6.2 Procedure Using the calliper (5.3) or the transparent type size sheet (5.18), record whether the type sizes are correct and the printing is legible. 6.7 Extinguishing of flames 6.7.1 Apparatus  Timing device (5.2.1). 6.7.2 Procedure After the article has ceased to function, start the timing device (5.2.1) immediately and record the time until any flames caused by the functioning of the articles are extinguished.
6.8 Burning rate of composition 6.8.1 Apparatus  timing device (5.2.1);  mould device (5.20). 6.8.2 Procedure Calculate the burning rate by using the timing device (5.2.1) Measure the burning time of the tested article and divide the net explosive content (in grams) or the corresponding length (in centimetres) by the measured time (in seconds). Record the burning rate.
For loose compositions, the procedure should be performed in accordance with 33.2.1.4.3 of the “Recommendations on the Transport of Dangerous Goods – Manual of Tests and Criteria” (see [1]), using the mould device (5.20) and the timing device (5.2.1). An equivalent method may be used. 6.9 Projected Debris
6.9.1 Apparatus  Measuring tape (5.5). 6.9.2 Procedure Record whether any debris is projected laterally during functioning and the reached distance by using the measuring tape (5.5). Record whether there is any hazardous debris projected. 6.10 Incandescent matter
SIST EN 16256-5:2013



EN 16256-5:2012 (E) 14 6.10.1 Apparatus  Measuring t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.