SIST EN ISO 11446:2004

SLOVENSKI STANDARD
SIST EN ISO 11446:2004
01-september-2004
&HVWQDYR]LOD±9WLþQLNRQHNWRUML]DHOHNWULþQHSULNOMXþNHYOHþQLKLQYOHþHQLKYR]LO
SROQLSULNOMXþNL]DYR]LOD]9VLVWHPL,62
Road vehicles - Connectors for the electrical connection of towing and towed vehicles -
13-pole connectors for vehicles with 12 V nominal supply voltage (ISO 11446:2004)
Straßenfahrzeuge - Elektrische Steckverbindungen zwischen Zugfahrzeugen und
Anhängern - 13polige Stecker für Fahrzeuge mit 12-V-Bordnetz-Nennspannung
Véhicules routiers - Connecteurs pour liaisons électriques entre véhicules tracteurs et
véhicules tractés - Connecteurs a 13 contacts pour les véhicules a tension nominale de
12 V (ISO 11446:2004)
Ta slovenski standard je istoveten z: EN ISO 11446:2004
ICS:
43.040.10 (OHNWULþQDLQHOHNWURQVND Electrical and electronic
RSUHPD equipment
SIST EN ISO 11446:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11446:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 11446:2004
EUROPEAN STANDARD
EN ISO 11446
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2004
ICS 43.040.10 Supersedes EN ISO 11446:2002
English version
Road vehicles - Connectors for the electrical connection of
towing and towed vehicles - 13-pole connectors for vehicles with
12 V nominal supply voltage (ISO 11446:2004)
Véhicules routiers - Connecteurs pour liaisons électriques Straßenfahrzeuge - Elektrische Steckverbindungen
entre véhicules tracteurs et véhicules tractés - Connecteurs zwischen Zugfahrzeugen und Anhängern - 13polige
à 13 contacts pour les véhicules à tension nominale de 12 Stecker für Fahrzeuge mit 12-V-Bordnetz-Nennspannung
V (ISO 11446:2004)
This European Standard was approved by CEN on 16 January 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11446:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11446:2004
EN ISO 11446:2004 (E)
Foreword
This document (EN ISO 11446:2004) has been prepared by Technical Committee ISO/TC 22
"Road vehicles" in collaboration with CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2004, and conflicting national
standards shall be withdrawn at the latest by August 2004.
This document supersedes EN ISO 11446:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 11446:2004 has been approved by CEN as EN ISO 11446:2004 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11446:2004


INTERNATIONAL ISO
STANDARD 11446
Third edition
2004-02-01


Road vehicles — Connectors for the
electrical connection of towing and towed
vehicles — 13-pole connectors for
vehicles with 12 V nominal supply
voltage
Véhicules routiers — Connecteurs pour liaisons électriques entre
véhicules tracteurs et véhicules tractés — Connecteurs à 13 contacts
pour les véhicules à tension nominale de 12 V





Reference number
ISO 11446:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 11446:2004
ISO 11446:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 11446:2004
ISO 11446:2004(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 1
4 Dimensions. 1
4.1 General. 1
4.2 Plug. 1
4.3 Socket. 3
4.4 Park socket. 5
5 Application of the connector . 8
5.1 Connector positions and free space. 8
5.2 Contact allocation. 8
5.3 Contact designation. 8
5.4
...