Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

This European Standard specifies the requirements relating to: Steel FE-PL1505 (15CrMoV6) Air melted Hardened and tempered Bars De ≤ 16 mm 980 MPa ≤ Rm ≤ 1 180 MPa for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL1505 (15CrMoV6) - Lufterschmolzen - Gehärtet und angelassen - Stangen - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

Diese Norm legt die Anforderungen an
Stahl FE-PL1505 (15CrMoV6)
Lufterschmolzen
Gehärtet und angelassen
Stangen
De  16 mm
980 MPa  Rm  1 180 MPa
zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PL1505 (15CrMoV6) - Élaboré à l'air - Trempé et revenu - Barres - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa

Aeronavtika - Jeklo FE-PL1505 (15CrMoV6) - Taljeno - Utrjeno in mehko žarjeno - Palice - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1180 MPa

Ta evropski standard določa zahteve glede: jeklenih FE-PL1505 (15CrMoV6), taljenih, utrjenih in mehko žarjenih palic De ≤ 16 mm 980 MPa ≤ Rm ≤ 1 180 MPa za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
16-Jul-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Jul-2012
Due Date
09-Sep-2012
Completion Date
17-Jul-2012

Relations

Buy Standard

Standard
EN 2213:2012
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 2213:2012SIST EN 2213:2012en,fr,de01-september-2012SIST EN 2213:2012SLOVENSKI
STANDARD



SIST EN 2213:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2213
March 2012 ICS 49.025.10 English Version
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤1 180 MPa
Série aérospatiale - Acier FE-PL1505 (15CrMoV6) - Élaboré à l'air - Trempé et revenu - Barres - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa
Luft- und Raumfahrt - Stahl FE-PL1505 (15CrMoV6) - Lufterschmolzen - Gehärtet und angelassen - Stangen - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa This European Standard was approved by CEN on 23 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2213:2012: ESIST EN 2213:2012



EN 2213:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .5 SIST EN 2213:2012



EN 2213:2012 (E) 3 Foreword This document (EN 2213:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 2213:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.