Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

This standard defines the manufacturing schedule, inspection schedule and inspection and test report for EN aerospace metallic semi-finished products. It also specifies the general principles, preparation and approval of these documents.
It shall be used with the relevant semi-finished product definition documents (level 3) defined in EN 4258.

Luft- und Raumfahrt - Metallische Werkstoffe - Fertigungsplan, Prüfanweisung, Abnahmeprüfzeugnis - Begriffe, allgemeine Grundsätze, Aufstellung und Genehmigung

Diese Norm definiert den Fertigungsplan, die Prüfanweisung und das Abnahmeprüfzeugnis für metallisches Halbzeug nach EN-Normen der Luft- und Raumfahrt. Sie legt auch die allgemeinen Grundsätze, Aufstellung und Genehmigung dieser Unterlagen fest. Sie ist in Verbindung mit den entsprechenden Definitionsdokumenten für Halbzeug (Stufe 3) nach EN 4258 anzuwenden.

Série aérospatiale - Matériaux métalliques - Fiche de fabrication, fiche d'essais, rapport de contrôle et d'essais - Définition, principes généraux, préparation et approbation

La présente norme définit la fiche de fabrication, la fiche d'essais et le rapport de contrôle et d'essais pour les demi-produits métalliques aérospatiaux EN. Elle spécifie également les principes généraux, la préparation et l'approbation de ces documents.
Elle doit etre utilisée en conjonction avec les documents de définition des demi-produits correspondants (niveau 3) définis dans EN 4258.

Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Relations

Buy Standard

Standard
EN 2078:2004
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approvalLuft- und Raumfahrt - Metallische Werkstoffe - Fertigungsplan, Prüfanweisung, Abnahmeprüfzeugnis - Begriffe, allgemeine Grundsätze, Aufstellung und GenehmigungSérie aérospatiale - Matériaux métalliques - Fiche de fabrication, fiche d'essais, rapport de contrôle et d'essais - Définition, principes généraux, préparation et approbationAerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 2078:2001SIST EN 2078:2004en01-maj-2004SIST EN 2078:2004SLOVENSKI
STANDARDSIST EN 2078:20011DGRPHãþD



SIST EN 2078:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2078December 2001ICS 49.025.05; 49.025.15Supersedes EN 2078:1993English versionAerospace series - Metallic materials - Manufacturing schedule,inspection schedule, inspection and test report - Definition,general principles, preparation and approvalSérie aérospatiale - Matériaux métalliques - Fiche defabrication, fiche d'essais, rapport de contrôle et d'essais -Définition, principes généraux, préparation et approbationLuft- und Raumfahrt - Metallische Werkstoffe -Fertigungsplan, Prüfanweisung, Abnahmeprüfzeugnis -Definition, allgemeine Grundsätze, Aufstellung undGenehmigungThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2078:2001 ESIST EN 2078:2004



EN 2078:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).This European Standard supersedes EN 2078:1993.After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 2078:2004



EN 2078:2001 (E)30IntroductionThis standard is part of the series of EN metallic material standards for aerospace applications. The generalorganization of this series is described in EN 4258.1ScopeThis standard defines the manufacturing schedule, inspection schedule and inspection and test report for ENaerospace metallic semi-finished products. It also specifies the general principles, preparation and approvalof these documents.It shall be used with the relevant semi-finished product definition documents (level 3) defined in EN 4258.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references, thelatest edition of the publication referred to applies.EN 2000Aerospace seri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.