SIST EN 60893-1:2004

SLOVENSKI SIST EN 60893-1:2004

STANDARD
september 2004
Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim
utrjevanjem za električne namene - 1. del: Definicije, oznake in splošne
zahteve (IEC 60893-1:2004)
Insulating materials - Industrial rigid laminated sheets based on thermosetting
resins for electrical purposes - Part 1: Definitions, designations and general
requirements (IEC 60893-1:2004)
ICS 29.035.20 Referenčna številka
SIST EN 60893-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60893-1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004

ICS 29.035.01 Supersedes EN 60893-1:1994


English version


Insulating materials -
Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes
Part 1: Definitions, designations and general requirements
(IEC 60893-1:2004)


Matériaux isolants -  Isolierstoffe -
Stratifiés industriels rigides en planches Tafeln aus technischen
à base de résines thermodurcissables Schichtpressstoffen
à usages électriques auf der Basis warmhärtender Harze
Partie 1: Définitions, désignations für elektrotechnische Zwecke
et exigences générales Teil 1: Definitionen, Bezeichnungen
(CEI 60893-1:2004) und allgemeine Anforderungen
(IEC 60893-1:2004)



This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60893-1:2004 E

---------------------- Page: 2 ----------------------

EN 60893-1:2004 - 2 -
Foreword

The text of document 15C/1542/FDIS, future edition 2 of IEC 60893-1, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60893-1 on 2004-03-01.

This European Standard supersedes EN 60893-1:1994.

The major changes from EN 60893-1:1994 are the following:

a) new material types have been included;
b) changes have been made to the property requirements of some existing types;
c) a new method for testing permittivity and dissipation factor has been added;
d) all non-specification data for each type has been moved to a new Part 4 document –
IEC/TR 60893-4: Typical values.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2004-12-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2007-03-01

Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 60893-1:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60893-1:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60893-2 - Industrial rigid laminated sheets based - -
on thermosetting resins for electrical
purposes
Part 2: Methods of test

IEC 60893-3 Series Part 3: Specifications for individual EN 60893-3 Series
materials

1)
IEC/TR 60893-4 - Part 4: Typical values - -





1)
Undated reference.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60893-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-01
Matériaux isolants –
Stratifiés industriels rigides en planches
à base de résines thermodurcissables
à usages électriques –
Partie 1:
Définitions, désignations et
exigences générales
Insulating materials –
Industrial rigid laminated sheets
based on thermosetting resins
for electrical purposes –
Part 1:
Definitions, designations
and general requirements
 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
y compris la photocopie et les photocopying and microfilm, without permission in writing from
électronique ou mécanique,
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60893-1 © IEC:2004 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_________
INSULATING MATERIALS –
INDUSTRIAL RIGID LAMINATED SHEETS
BASED ON THERMOSETTING RESINS
FOR ELECTRICAL PURPOSES –
Part 1: Definitions, designations and general requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees
...