SIST EN 2100:2001
(Main)Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mm
Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mm
This standard specifies the requirements relating to extruded bars and sections in aluminium alloy AL-P2014A, for use in the T4511 condition, a or D inferior or equal to 200 mm, for aerospace applications.
This standard may also be used to supply material in the T4510 condition, if the purchaser specifies this condition on the order. In this case, the designation of line 97 shall not be used.
Luft- und Raumfahrt - Aluminiumlegierung AL-P2014A T4511 - Stranggepreßte Stangen und Profile a oder D < oder = 200 mm
Série aérospatiale - Alliage d'aluminium AL-P2014A T4511 - Barres et profilés filés a ou D < ou = 200 mm
Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mm
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mmLuft- und Raumfahrt - Aluminiumlegierung AL-P2014A T4511 - Stranggepreßte Stangen und Profile a oder D < oder = 200 mmSérie aérospatiale - Alliage d'aluminium AL-P2014A T4511 - Barres et profil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.