iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61030:1999

(Main)

Audio, video and audiovisual systems - Domestic Digital Bus (D2B)

Audio, video and audiovisual systems - Domestic Digital Bus (D2B)

The audio-video cluster (TV set, VCR, etc.) needed a practical bus for interconnecting devices and exchanging messages. D2B was developed for this purpose. Gives the modes of transmission, the communication protocols, the addressing scheme, the command language and the electrical characteristics for the Domestic Digital Bus (D2B) System.

Audio-, Video- und audiovisuelle Anlagen - Digitaler Bus für Heimanwendung (D2B)

Systèmes audio, vidéo et audiovisuels - Bus Numérique Domestique (D2B)

Le groupement audio/vidéo (téléviseur, magnétoscope, etc) ayant besoin d'un bus pratique pour l'interconnexion des appareils et l'échange des messages. Le D2B a été conçu dans ce but. Donne les modes de transmission, les protocoles de communications, les stratégies d'adressages, le langage de commande et les caractéristiques électriques du Bus numérique domestique (Système D2B).

Audio, video and audiovisual systems - Domestic Digital Bus (D2B) (IEC 61030:1991 + A1:1993)

General Information

Status
Withdrawn
Publication Date
31-Mar-1999
Withdrawal Date
15-Aug-2023
ICS
33.160.01 - Audio, video and audiovisual systems in general
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Aug-2023
Due Date
26-Aug-2023
Completion Date
16-Aug-2023
Mandate
BC-IT-78A EFTA-IT-78 - BC-IT-78A EFTA-IT-78
Ref Project
EN 61030:1993 - Audio, video and audiovisual systems - Domestic Digital Bus (D2B)

Buy Standard

EN 61030:1999EN 61030:1999
PreviousNext
Standard
EN 61030:1999
English language
82 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Audio, video and audiovisual systems - Domestic Digital Bus (D2B) (IEC 61030:1991 + A1:1993)Audio-, Video- und audiovisuelle Anlagen - Digitaler Bus für Heimanwendung (D2B)Systèmes audio, vidéo et audiovisuels - B
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62980:2023(Main)
Parasitic communication protocol for radio-frequency wireless power transmission (IEC 62980:2022)
EN IEC 62980:2022

This standard defines procedures for transferring power to non-powered IoT devices using the existing ISM band communication infrastructure and RF WPT and a protocol for a two-way, long-distance wireless network in which IoT devices and APs communicate using backscatter modulation of ISM-band signals. Three components are required for two-way, long-distance wireless communication using backscatter modulation of ISM-band signals: an STA that transmits wireless power and data packets to SSNs by forming ISM-band signal channels between HIE-APs, a batteryless SSN that changes the sensitivity of the channel signals received from the STA using backscatter modulation, and an HIE-AP that practically decodes the channel signals whose sensitivity was changed by the SSN. In this standard, the procedures for CW-type RF WPT using communication among these three components are specified based on application of the CSI or RSSI detection method of ISM-band communication.
This standard proposes a convergence communication protocol than can deploy sensors, which can operate at low power (dozens of microwatts or less) without batteries, collect energy, and perform communication, to transmit power to SSNs using RF WPT based on parasitic communication. This method can be applied to application service areas such as domestic IoT, the micro-sensor industry, and industries related to environmental monitoring in the future

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63254:2023(Main)
Management and interfaces for WPT - Device-to-device wireless charging (D2DWC) for mobile devices with wireless power TX/RX module (IEC 63254:2022)
EN IEC 63254:2022

This standard defines specification and control protocol of D2DWC module for using wireless power TX and RX functions by only one single device. And the related antenna physical design examples are presented in Annex A for sharing information. This standard propose D2DWC module circuit requirement which are consisted with the D2DWC main AP, D2DWC IC, EMT/WPT Antenna Unit and PMIC unit. In the Chapter 5, ‘Specifications and control protocol of D2DWC’, the register information and message protocols for WPT control are defined in order to implement the WPT TX function. In this standard, the interface and protocol in the wireless power process of the mobile device can be used in accordance with the corresponding wireless power transfer standard. Any wireless power transfer standard working inside 100 - 350 kHz frequency range can be included from the scope of this standard. This standard can be used to mobile wireless power transfer in mobile phones and other mobile devices, IoT, and micro-sensor industries and related application fields.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60958-1:2022(Main)
Digital audio interface - Part 1: General (IEC 60958-1:2021)
EN IEC 60958-1:2021

This part of IEC 60958 describes a serial, uni-directional, self-clocking interface for the
interconnection of digital audio equipment for consumer and professional applications.
It provides the basic structure of the interface. Separate documents define items specific to
particular applications.
The interface is primarily intended to carry monophonic or stereophonic programmes, encoded
using linear PCM and with a resolution of up to 24 bits per sample.
When used for other purposes, the interface is able to carry audio data coded other than as
linear PCM coded audio samples. Provision is also made to allow the interface to carry data
related to computer software, multimedia technologies, or signals coded using non-linear PCM.
The format specification for these applications is not part of this document.
The interface is intended for operation at audio sampling frequencies of 32 kHz and above.
Auxiliary information is transmitted along with the programme.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60958-3:2022(Main)
Digital audio interface - Part 3: Consumer applications (IEC 60958-3:2021)
EN IEC 60958-3:2021

This part of IEC 60958 specifies the consumer application of the interface for the inter connection of digital audio equipment defined in IEC 60958-1.
NOTE When used in a consumer digital processing environment, the interface is primarily intended to carry stereophonic programmes, with a resolution of up to 20 bits per sample, an extension to 24 bits per sample being possible.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63245-1:2021(Main)
Spatial wireless power transfer based on multiple magnetic resonances - Part 1: Requirements (IEC 63245-1:2021)
EN IEC 63245-1:2021

This part of IEC 63245 specifies requirements for spatial wireless power transfer based on
multiple magnetic resonances (SWPT-MMR), which is a non-radiative wireless power transfer
(WPT). This document contains two categories of requirements: general requirements and
functional requirements. The general requirements cover charging procedures and charging
zones. The functional requirements cover each component of a SWPT-MMR system, such as
transmitter coils.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62087-7:2019(Main)
Audio, video and related equipment - Methods of measurement for power consumption - Part 7: Computer Monitors (IEC 62087-7:2018)
EN IEC 62087-7:2019

This part of IEC 62087 specifies the determination of the power consumption of computer
monitors including, but is not limited to, those with CRT, LCD, PDP or OLED technologies.
Computer monitors that include touch screen functionality are included in the scope of this
document. This document is limited to computer monitors that are powered from a main power
source other than a battery. Computer monitors that are powered from a battery source are
not covered by this document. However mains-powered computer monitors may include any
number of auxiliary batteries.
Computer monitors connected by digital inputs such as DisplayPort, HDMI, DVI, or by
analogue VGA input, are considered in this document. This document does not apply to
network- and wirelessly connected computer monitors.
A computer monitor is a display device that does not include a TV tuner and is intended to be
used to display the video signals from a computer. These video signals are produced from
software programs that are operating within the computer and can consist of static and
moving images. As such, test procedures using static patterns, dynamic video and web-based
video are specified.
The test methods specified in this document can be applied to computer monitors of any size,
however, this document is not applicable to specialized monitors associated with medical
equipment, publishing and other professional, commercial or industrial uses.
The various modes of operation that are relevant for measuring power consumption are also
defined.
The measuring conditions in this document represent the normal use of the equipment and
can differ from specific conditions, for example as specified in safety standards.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60268-21:2019(Main)
Sound system equipment - Part 21: Acoustical (output-based) measurements (IEC 60268-21:2018)
EN IEC 60268-21:2018

This part of IEC 60268 specifies an acoustical measurement method that applies to electroacoustical
transducers and passive and active sound systems, such as loudspeakers, TV-sets,
multi-media devices, personal portable audio devices, automotive sound systems and
professional equipment. The device under test (DUT) can be comprised of electrical
components performing analogue and digital signal processing prior to the passive actuators
performing a transduction of the electrical input into an acoustical output signal. This
document describes only physical measurements that assess the transfer behaviour of the
DUT between an arbitrary analogue or digital input signal and the acoustical output at any
point in the near and far field of the system. This includes operating the DUT in both the small
and large signal domains. The influence of the acoustical boundary conditions of the target
application (e.g. car interior) can also be considered in the physical evaluation of the sound
system. This document does not assess the perception and cognitive evaluation of the
reproduced sound and the impact of perceived sound quality.
NOTE Some measurement methods defined in this document can be applied to headphones, headsets,
earphones and earsets in accordance with [1]1. This document does not apply to microphones and other sensors.
This document does not require access to the state variables (voltage, current) at the electrical terminals of the
transducer. Sensitivity, electric input power and other characteristics based on the electrical impedance will be
described in a separate future standard document, IEC 60268-22, dedicated to electrical and mechanical
measurements.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 63029:2018/AC:2018(Corrigendum)
Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books (IEC 63029:2017/COR1:2018)
EN 63029:2017/AC:2018-02

IEC corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60728-13-1:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system (IEC 60728-13-1:2017 + COR1:2017)
EN 60728-13-1:2017

The purpose of this part of IEC 60728 is the precise description of an FTTH (fibre to the home)
system for expanding broadband broadcast signal transmission from CATV services only,
towards CATV plus broadcast satellite (BS) plus communication satellite (CS) services,
additionally to other various signals such as data services.
The scope is limited to the RF signal transmission over FTTH systems.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 63029:2018(Main)
Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books (IEC 63029:2017)
EN 63029:2017

This document specifies the scanning scheme to develop raster-graphics image-based ebooks
from existing printed books.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day