Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and classification

This International Standard defines terms corresponding to, and gives guidance for the classification of,
mobile and self-propelled machinery used in forestry and related operations. Both the definitions and the
classification have been determined according to the end use of the machines as intended by the
manufacturer. The terms and definitions do not cover all possible forestry and related operations or machinery,
nor do they describe specific machines, but are given as an aid to nomenclature.
This International Standard is applicable to machines designed for use in forestry for site preparation, planting,
harvesting, processing, and the transport of wood and wood fibre. It is not applicable to machines designed to
be used exclusively in sawmills or wood yards, to on-highway transport vehicles, or to aerial vehicles.

Matériel forestier - Machines mobiles et automotrices - Termes, définitions et classification

L'ISO 6814:2009 d�finit des termes relatifs aux machines mobiles et automotrices utilis�es pour les travaux forestiers et travaux associ�s, et fournit des lignes directrices pour la classification de ces machines. Les d�finitions et la classification ont �t� d�termin�s par l'emploi final auquel le fabricant destine la machine. Les termes et d�finitions ne comprennent pas tous les travaux forestiers et travaux associ�s, ni ne d�crivent des machines sp�cifiques, mais sont donn�s en tant qu'aide � la nomenclature.
L'ISO 6814:2009 s'applique aux machines con�ues pour �tre utilis�es en for�t dans la pr�paration du terrain, la plantation, l'exploitation, le fa�onnage et le d�bardage du bois d'œuvre et des bois de trituration. Elle ne s'applique pas aux machines con�ues pour �tre utilis�es exclusivement dans les scieries ou les parcs � bois, aux v�hicules de transport routier ni aux a�ronefs.

Gozdarski stroji - Mobilni stroji in stroji z lastnim pogonom - Izrazi, definicije in klasifikacija

Ta mednarodni standard določa izraze, ki ustrezajo kategorizaciji mobilnih strojev in strojev z lastnim pogonom, ki se uporabljajo v gozdarstvu in podobnih dejavnostih, ter zagotavlja navodila zanjo. Definicije in kategorizacija so bile določene glede na končno uporabo strojev, kakor jo opredeli proizvajalec. Izrazi in definicije ne zajemajo vseh možnih dejavnosti ali strojev v gozdarstvu in podobnih dejavnosti ali strojev niti ne opisujejo posameznih strojev, ampak zagotavljajo pomoč pri nomenklaturi.
Ta mednarodni standard velja za stroje, namenjene uporabi v gozdarstvu za pripravo lokacije, sajenje, žetev, obdelavo ter prevoz lesa in lesnih vlaken. Ne velja za stroje, namenjene izključno uporabi v žagah ali skladiščnih površinah, kjer se hrani les, vozila za prevoz po avtocestah ali zrakoplove.

General Information

Status
Published
Publication Date
23-Feb-2015
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Feb-2015
Due Date
18-Apr-2015
Completion Date
24-Feb-2015

Relations

Buy Standard

Standard
ISO 6814:2009 - Machinery for forestry -- Mobile and self-propelled machinery -- Terms, definitions and classification
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6814:2015
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 6814:2009 - Matériel forestier -- Machines mobiles et automotrices -- Termes, définitions et classification
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6814
Third edition
2009-05-15

Machinery for forestry — Mobile and
self-propelled machinery — Terms,
definitions and classification
Matériel forestier — Machines mobiles et automotrices — Termes,
définitions et classification




Reference number
ISO 6814:2009(E)
©
ISO 2009

---------------------- Page: 1 ----------------------
ISO 6814:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6814:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6814 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 15, Machinery for forestry.
This third edition cancels and replaces the second edition (ISO 6814:2000), which has been technically
revised.

© ISO 2009 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 6814:2009(E)

Machinery for forestry — Mobile and self-propelled
machinery — Terms, definitions and classification
1 Scope
This International Standard defines terms corresponding to, and gives guidance for the classification of,
mobile and self-propelled machinery used in forestry and related operations. Both the definitions and the
classification have been determined according to the end use of the machines as intended by the
manufacturer. The terms and definitions do not cover all possible forestry and related operations or machinery,
nor do they describe specific machines, but are given as an aid to nomenclature.
This International Standard is applicable to machines designed for use in forestry for site preparation, planting,
harvesting, processing, and the transport of wood and wood fibre. It is not applicable to machines designed to
be used exclusively in sawmills or wood yards, to on-highway transport vehicles, or to aerial vehicles.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1 Site preparation, planting and maintenance operations
2.1.1
ground preparation
bedding
preparation of the soil surface to provide a location for planting
2.1.2
chopping
breaking down material into shorter pieces
2.1.3
cleaning
selective removal of unwanted shrubs and trees without use of the wood
2.1.4
clearing
removing unwanted residues (logging waste), shrubs, trees and stumps
2.1.5
grubbing
removing trees and stumps from an area by severing below the ground surface, lifting, and pushing into piles
2.1.6
mulching
reduction of trees, brush or parts of trees on site with a grinding or shredding action, leaving the resulting
material on the forest floor
© ISO 2009 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 6814:2009(E)
2.1.7
planting
putting trees or seedlings into the ground at their growing positions
2.1.8
ploughing
shearing and turning mineral soil with a linear motion
2.1.9
pruning
removal of live or dead branches or of multiple leaders of shoots from standing trees
2.1.10
raking
moving loose material using a toothed or comb-like device
2.1.11
scarifying
preparing the ground surface for planting or regeneration by lightly cultivating the surface
2.2 Forest harvesting operations
2.2.1
bunching
gathering and arranging trees or parts of trees in bunches
2.2.2
bundling
baling
collecting trees or parts of trees and compressing and binding them into a denser form
2.2.3
cable yarding
transporting trees or parts of trees by means of a cable system partially or fully elevated above the forest floor
2.2.4
chipping
breaking down/slicing trees into small pieces of specified dimensions
2.2.5
crushing
reduction of trees or parts of trees by compression or impacting
2.2.6
debarking
removing bark from trees or parts of trees
2.2.7
delimbing
removing branches from trees or parts of trees
2.2.8
felling
severing trees from the stump
2.2.9
forwarding
transporting trees or parts of trees by carrying them
2 © ISO 2009 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 6814:2009(E)
2.2.10
grinding
reduction of trees, brush or parts of trees by tearing, shredding, impacting or shearing to a uniform particle
size
2.2.11
harvesting
felling combined with other processing functions
2.2.12
loading
picking up trees or parts of trees from the ground, or from a vehicle, and piling them on a vehicle
2.2.13
stacking
depositing trees or parts of trees in orderly piles
2.2.14
processing
function or combination of functions other than felling that change the form of the material
2.2.15
skidding
transporting trees or parts of trees by trailing or dragging
2.2.16
cross-cutting
cutting felled or uprooted trees or parts of trees into lengths
2.2.16.1
slashing
cross-cutting to approximate lengths
2.2.16.2
bucking
cross-cutt
...

SLOVENSKI STANDARD
SIST ISO 6814:2015
01-april-2015
1DGRPHãþD
SIST ISO 6814:1995
Gozdarski stroji - Mobilni stroji in stroji z lastnim pogonom - Izrazi, definicije in
klasifikacija
Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and
classification
Matériel forestier - Machines mobiles et automotrices - Termes, définitions et
classification
Ta slovenski standard je istoveten z: ISO 6814:2009
ICS:
01.040.65 Kmetijstvo (Slovarji) Agriculture (Vocabularies)
65.060.80 Gozdarska oprema Forestry equipment
SIST ISO 6814:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 6814:2015

---------------------- Page: 2 ----------------------

SIST ISO 6814:2015

INTERNATIONAL ISO
STANDARD 6814
Third edition
2009-05-15

Machinery for forestry — Mobile and
self-propelled machinery — Terms,
definitions and classification
Matériel forestier — Machines mobiles et automotrices — Termes,
définitions et classification




Reference number
ISO 6814:2009(E)
©
ISO 2009

---------------------- Page: 3 ----------------------

SIST ISO 6814:2015
ISO 6814:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 6814:2015
ISO 6814:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6814 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 15, Machinery for forestry.
This third edition cancels and replaces the second edition (ISO 6814:2000), which has been technically
revised.

© ISO 2009 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 6814:2015

---------------------- Page: 6 ----------------------

SIST ISO 6814:2015
INTERNATIONAL STANDARD ISO 6814:2009(E)

Machinery for forestry — Mobile and self-propelled
machinery — Terms, definitions and classification
1 Scope
This International Standard defines terms corresponding to, and gives guidance for the classification of,
mobile and self-propelled machinery used in forestry and related operations. Both the definitions and the
classification have been determined according to the end use of the machines as intended by the
manufacturer. The terms and definitions do not cover all possible forestry and related operations or machinery,
nor do they describe specific machines, but are given as an aid to nomenclature.
This International Standard is applicable to machines designed for use in forestry for site preparation, planting,
harvesting, processing, and the transport of wood and wood fibre. It is not applicable to machines designed to
be used exclusively in sawmills or wood yards, to on-highway transport vehicles, or to aerial vehicles.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1 Site preparation, planting and maintenance operations
2.1.1
ground preparation
bedding
preparation of the soil surface to provide a location for planting
2.1.2
chopping
breaking down material into shorter pieces
2.1.3
cleaning
selective removal of unwanted shrubs and trees without use of the wood
2.1.4
clearing
removing unwanted residues (logging waste), shrubs, trees and stumps
2.1.5
grubbing
removing trees and stumps from an area by severing below the ground surface, lifting, and pushing into piles
2.1.6
mulching
reduction of trees, brush or parts of trees on site with a grinding or shredding action, leaving the resulting
material on the forest floor
© ISO 2009 – All rights reserved 1

---------------------- Page: 7 ----------------------

SIST ISO 6814:2015
ISO 6814:2009(E)
2.1.7
planting
putting trees or seedlings into the ground at their growing positions
2.1.8
ploughing
shearing and turning mineral soil with a linear motion
2.1.9
pruning
removal of live or dead branches or of multiple leaders of shoots from standing trees
2.1.10
raking
moving loose material using a toothed or comb-like device
2.1.11
scarifying
preparing the ground surface for planting or regeneration by lightly cultivating the surface
2.2 Forest harvesting operations
2.2.1
bunching
gathering and arranging trees or parts of trees in bunches
2.2.2
bundling
baling
collecting trees or parts of trees and compressing and binding them into a denser form
2.2.3
cable yarding
transporting trees or parts of trees by means of a cable system partially or fully elevated above the forest floor
2.2.4
chipping
breaking down/slicing trees into small pieces of specified dimensions
2.2.5
crushing
reduction of trees or parts of trees by compression or impacting
2.2.6
debarking
removing bark from trees or parts of trees
2.2.7
delimbing
removing branches from trees or parts of trees
2.2.8
felling
severing trees from the stump
2.2.9
forwarding
transporting trees or parts of trees by carrying them
2 © ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------

SIST ISO 6814:2015
ISO 6814:2009(E)
2.2.10
grinding
reduction of trees, brush or parts of trees by tearing, shredding, impacting or shearing to a uniform particle
size
2.2.11
harvesting
felling combined with other processing functions
2.2.12
loa
...

NORME ISO
INTERNATIONALE 6814
Troisième édition
2009-05-15


Matériel forestier — Machines mobiles et
automotrices — Termes, définitions et
classification
Machinery for forestry — Mobile and self-propelled machinery —
Terms, definitions and classification




Numéro de référence
ISO 6814:2009(F)
©
ISO 2009

---------------------- Page: 1 ----------------------
ISO 6814:2009(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2009
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2009 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6814:2009(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 6814 a été élaborée par le comité technique ISO/TC 23, Tracteurs et matériels agricoles et forestiers,
sous-comité SC 15, Matériel forestier.
Cette troisième édition annule et remplace la deuxième édition (ISO 6814:2000), qui a fait l'objet d'une
révision technique.

© ISO 2009 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 6814:2009(F)

Matériel forestier — Machines mobiles et automotrices —
Termes, définitions et classification
1 Domaine d'application
La présente Norme internationale définit des termes relatifs aux machines mobiles et automotrices utilisées
pour les travaux forestiers et travaux associés, et fournit des lignes directrices pour la classification de ces
machines. Les définitions et la classification ont été déterminés par l'emploi final auquel le fabricant destine la
machine. Les termes et définitions ne comprennent pas tous les travaux forestiers et travaux associés, ni ne
décrivent des machines spécifiques, mais sont donnés en tant qu'aide à la nomenclature.
La présente Norme internationale s'applique aux machines conçues pour être utilisées en forêt dans la
préparation du terrain, la plantation, l'exploitation, le façonnage et le débardage du bois d'œuvre et des bois
de trituration. Elle ne s'applique pas aux machines conçues pour être utilisées exclusivement dans les scieries
ou les parcs à bois, aux véhicules de transport routier ni aux aéronefs.
2 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s'appliquent.
2.1 Travaux de préparation du terrain, de plantation et d'entretien
2.1.1
préparation du sol avant plantation
préparation de la surface du sol pour obtenir un emplacement propice à la plantation
2.1.2
hachage
broyage au sol
action de casser les matériaux en petits morceaux
2.1.3
dégagement
enlèvement sélectif des buissons et des arbres indésirables, sans utilisation du bois
2.1.4
défrichement
enlèvement des rémanents (déchets de coupe), buissons, arbres et souches indésirables
2.1.5
abattage-dessouchage
enlèvement des arbres et des souches d'une parcelle en les coupant en dessous du niveau du sol, puis en les
soulevant et les poussant pour former des andains
2.1.6
gyrobroyage
réduction des arbres, broussailles ou parties d'arbres sur place, par broyage ou déchiquetage, en
morceaux/fragments laissés au sol
© ISO 2009 – Tous droits réservés 1

---------------------- Page: 4 ----------------------
ISO 6814:2009(F)
2.1.7
plantation
mise en place, à leur emplacement définitif, de semis ou d'arbres
2.1.8
labourage
tranchage et retournement du sol dans un mouvement linéaire
2.1.9
élagage
enlèvement des branches vivantes ou mortes ou de pousses terminales multiples sur des arbres en place
2.1.10
mise en andains
déplacement des rémanents en utilisant un appareil muni de dents ou en forme de peigne
2.1.11
scarification
préparation de la surface du sol pour la plantation ou la régénération au moyen d'un léger ameublissement de
la surface
2.2 Travaux d'exploitation forestière
2.2.1
mise en javelles
action de rassembler et de ranger les arbres ou parties d'arbres en javelles
2.2.2
fagotage
mise en fagot [balle]
action de rassembler les arbres ou parties d'arbres, de les comprimer et de les lier ensemble en une forme
dense
2.2.3
téléphérage
débardage des arbres ou des parties d'arbres au moyen d'un système de câbles partiellement ou totalement
au-dessus du sol
2.2.4
déchiquetage
action de casser ou de découper les arbres en petits morceaux de dimensions bien spécifiées
2.2.5
broyage
réduction d'arbres ou parties d'arbres par écrasement ou percussion
2.2.6
écorçage
enlèvement de l'écorce des arbres ou de parties d'arbres
2.2.7
ébranchage
enlèvement des branches des arbres ou de parties d'arbres
2.2.8
abattage
coupe des arbres les séparant de leur souche
2 © ISO 2009 – Tous droits réservés

---------------------- Page: 5 ----------------------
ISO 6814:2009(F)
2.2.9
débardage
transport des arbres ou de parties d'arbres en les portant
2.2.10
broyage
déchiquetage
réduction d'arbres, de broussailles ou de parties d'arbres en particules de taille uniforme, par arrachement,
déchiquetage, percussion ou cisaillement
2.2.11
récolte
abattage combiné avec d'autres fonctions de façonnage
2.2.12
chargement
prise d'arbres ou de parties d'arbres depuis le sol ou depuis un véhicule et empilage de ceux-ci sur un
véhicule
2.2.13
empilage
action de déposer des arbres ou des parties d'arbres en piles bien ordonnées
2.2.14
façonnage
fonction ou combinaison de fonctions, autres que l'abattage, entraînant un changement de la forme des bois
2.2.15
débusquage
transport d'arbres ou de parties d'arbres en les halant ou en les traînant
2.2.16
tronçonnage
action de couper en éléments de différentes longueurs des arbres abattus ou déracinés ou des parties
d'arbres
2.2.16.1
découpe
tronçonnage en longueurs approximatives
2.2.16.2
billonnage
tronçonnage en longueurs données
2.2.17
tri
action de séparer les arbres ou les parties d'arbres et de les regrouper en fonction de critères particuliers
2.2.18
fendage
action de diviser, dans le sens longitudinal, des arbres ou des parti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.