SIST EN 10210-3:2020

Oznaka standarda: SIST EN 10210-3:2020
Koda projekta: EC103119
Organizacija: SIST
Naslov (angleški): Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
Naslov (slovenski): Vroče izdelani votli konstrukcijski profili iz jekla - 3. del: Tehnični dobavni pogoji za jekla z visoko trdnostjo in vodoodporna
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 10210-3:2020 angleški jezik Active SIST-I: 85.91 EUR
PDF
Papir
Tehnični odbor: IFEK - Železne kovine
ICS: 77.140.45 77.140.75
Status: Objavljen
Objavljen: 01-Nov-2020
Refer. št. objave: Sporocila 2020-11
Referenčna oznaka: EN 10210-3:2020
Področje projekta (angleško): This part of this European Standard specifies technical delivery conditions for hot-finished seamless, electric welded and submerged arc welded steel structural hollow sections for mechanical engineering purposes of circular, square, rectangular or elliptical forms. It applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment above 580 °C to obtain equivalent mechanical properties to those obtained in the hot formed product. NOTE 1 The requirements for tolerances, dimensions and sectional properties are specified in EN 10210-2. NOTE 2 The attention of users is drawn to the fact that whilst cold formed grades in EN 10219-3 can have equivalent mechanical properties to hot-finished grades in EN 10210-3 the sectional properties of square and rectangular hollow sections in EN 10210-2 and EN 10219-2 are not equivalent. NOTE 3 A range of material grades is specified in this document and the user should select the grade most appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are generally comparable with those in EN 10025-2, EN 10025-3, EN 10025-4, EN 10025-5 and EN 10025-6. NOTE 4 The requirements for seamless and welded steel structural hollow sections for use in offshore structures are covered in EN 10225. NOTE 5 Spiral welded hollow sections are to be used with caution in construction of dynamic behaviour (fatigue stress) where up to now, there is insufficient knowledge of their performance.

Najbolje prodajani standardi