SIST EN 13402-2:2002
(Main)Size designation of clothes - Part 2: Primary and secondary dimensions
Size designation of clothes - Part 2: Primary and secondary dimensions
This European Standard specifies primary and secondary dimensions for specified types of garments to be used in combination with EN 13402-1.
The primary aim of this European Standard is the establishment of a size designation system that can be used by manufacturers and retailers to indicate to consumers (in a simple, direct and meaningful manner) the body dimensions of the person that the garment is intended to fit. Provided the size of the persons body (as indicated by the specified dimensions) has been determined, in accordance with EN 13402-1 this designation system will facilitate the choice of garments that fit.
The size designation system is based on body and not on garment measurements. Choice of garment measurements is normally determined by the designer and the manufacturer who will make appropriate allowances to accommodate the type, position of wear, style, cut and fashion elements of the garment.
Größenbezeichnung von Bekleidung - Teil 2: Primär- und Sekundärmaße
Diese Europäische Norm legt Primär- und Sekundärmaße für festgelegte Arten von Bekleidungsstücken fest, die in Verbindung mit prEN 13402 angewendet werden. Das vorrangige Ziel dieser Europäischen Norm besteht darin, ein System der Größenbezeichnungen zu erstellen, mit dem Hersteller und Händler den Käufern (in einfacher, direkter und sinnvoller Weise) die Körpermaße der Person angeben, der das Kleidungsstück passen soll. Das vorliegende Bezeichnungssystem wird die Auswahl passender Bekleidungsstücke erleichtern, wenn die Körpergröße der Person fehlerfrei bestimmt wurde.
Désignation des tailles de vetements - Partie 2: Mesures primaires et secondaires
Cette Norme européenne prescrit les mesures primaires et secondaires pour des types spécifiés de vetements, a utiliser conjointement avec le prEN 13402. Cette Norme européenne a pour principal objet d'établir un systeme de désignation des tailles de vetements a utiliser par les fabricants et les détaillants pour indiquer aux consommateurs, d'une maniere simple, directe et explicite, les mensurations de la personne pour laquelle la taille du vetement est adaptée. Grâce a une détermination précise des mensurations du corps humain, ce systeme de désignation facilitera davantage le choix d'un vetement adapté.
Označevanje velikosti oblačil - 2. del: Primarne in sekundarne mere
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13402-2:2002
01-september-2002
2]QDþHYDQMHYHOLNRVWLREODþLOGHO 3ULPDUQHLQVHNXQGDUQHPHUH
Size designation of clothes - Part 2: Primary and secondary dimensions
Größenbezeichnung von Bekleidung - Teil 2: Primär- und Sekundärmaße
Désignation des tailles de vetements - Partie 2: Mesures primaires et secondaires
Ta slovenski standard je istoveten z: EN 13402-2:2002
ICS:
61.020 2EODþLOD Clothes
SIST EN 13402-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 13402-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2002
ICS 61.020
English version
Size designation of clothes - Part 2: Primary and secondary
dimensions
Désignation des tailles de vêtements - Partie 2: Mesures Größenbezeichnung von Bekleidung - Teil 2: Primär- und
primaires et secondaires Sekundärmaße
This European Standard was approved by CEN on 24 January 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13402-2:2002 E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 13402-2:2002 (E)
Contents
Foreword.3
Introduction .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Definition of primary and secondary dimensions in garments.4
2
---------------------- Page: 3 ----------------------
EN 13402-2:2002 (E)
Foreword
This document (EN 13402-2:2002) has been prepared by Technical Committee CEN/TC 248 "Textiles and textile
products", the secretariat of which is held by BSI.
It is one of a series of standards being prepared describing the size designation of clothes. Other standards in the
series have the following titles:
EN 13402-1, Size designation of clothes – Part 1: Terms, definitions and body measurement procedure (ISO:
3635:1981 modified).
prEN 13402-3, Size designation of clothes – Part 3: Measurements and intervals.
prEN 13402-4, Size designation of clothes – Part 4: Coding system.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at the
latest by September 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
Introduction
Different sizing systems in Europe mean that different clothing size designations in use in European countries can
fit persons with identical or almost identical body measurements.
This European Standard is a reference document for a standardized European size designation system for different
types of garment.
3
---------------------- Page: 4 ----------------------
EN 13402-2:2002 (E)
1 Scope
This European Standard specifies primary and secondary dimensions for specified types of garments to be used in
combination with EN 13402-1.
The primary aim of this European Standard is the establishment of a size designation system that can be used by
manufacturers and retailers to indicate to consumers (in a simple, direct and meaningful manner) the body
dimensi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.