Satellite Earth Stations and Systems (SES) - Harmonized EN for Mobile Earth Stations (MESs) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the R&TTE Directive

REN/SES-00320

Satelitske zemeljske postaje in sistemi (SES) - Harmonizirani evropski standard (EN) za mobilne zemeljske postaje (MES) geostacionarnih mobilnih satelitskih sistemov, vključno z ročnimi zemeljskimi postajami, za satelitska osebna komunikacijska omrežja (S-PCN), ki delujejo v frekvenčnih pasovih 1,5/1,6 GHz pri mobilni satelitski storitvi (MSS), ki zajema bistvene zahteve člena 3.2 direktive o radijski in telekomunikacijski terminalski opremi (R&TTE)

Ta dokument velja za S-PCN MES za geostacionarne mobilne satelitske sisteme z EIRP, manjšim od 15 dBW ali enakim.
Ta dokument podaja minimalne delovne zahteve in tehnične značilnosti mobilnih zemeljskih postaj (MES) z zmožnostjo oddajanja in sprejemanja za delovanje v satelitskem osebnem komunikacijskem omrežju (S-PCN) v kateri koli kombinaciji vseh ali katerih koli delov podpasu 1 in podpasu 2 frekvenčnih pasov mobilnih satelitskih storitev (MSS), kot je določeno v preglednici 1.
S-PCN MES je lahko ročna, prenosna, nameščena na vozilo, povezana na gostitelja, polpritrjena ali pritrjena oprema, lahko pa je element v večrodovnem terminalu; lahko je sestavljena iz številnih modulov s povezanimi priključki in uporabniškimi vmesniki, lahko pa je ena samostojna enota.
Če je MES element v večrodovnem terminalu, razen če je drugače navedeno v tem dokumentu, njegove zahteve veljajo samo za element S-PCN MES terminala, ki deluje v frekvenčnem pasu MSS, navedenem v preglednici 1. Ta dokument zajema določbe člena 3.2 Direktive 1999/5/ES [1] (Direktive R&TTE), ki navaja, da je »… radijska oprema narejena tako, da učinkovito izrablja spekter, dodeljen
zemeljskim/vesoljskim radiokomunikacijam in orbitalnim virom, tako da ne pride do škodljivega motenja«. Poleg tega dokumenta se preostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 Direktive R&TTE [1], lahko uporabljajo za opremo v okviru obsega uporabe tega dokumenta.

General Information

Status
Published
Public Enquiry End Date
31-May-2011
Publication Date
22-Dec-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Dec-2011
Due Date
11-Feb-2012
Completion Date
23-Dec-2011
Mandate

Buy Standard

Standard
EN 301 681 V1.4.1:2012 - standard je pravilno sestavljen, osnova je verzija 1.4.1
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VDWHOLWVNLKSatellite Earth Stations and Systems (SES) - Harmonized EN for Mobile Earth Stations (MESs) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the R&TTE Directive33.070.40SatelitSatelliteICS:Ta slovenski standard je istoveten z:EN 301 681 Version 1.SIST EN 301 681 V1.4.1:2012en01-januar-2012SIST EN 301 681 V1.4.1:2012SLOVENSKI
STANDARD



SIST EN 301 681 V1.4.1:2012



ETSI EN 301 681 V1.4.1 (2011-11) Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the R&TTE Directive
Harmonized European Standard SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 2
Reference REN/SES-00320 Keywords earth station, MES, mobile, MSS, radio, satellite, S-PCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 8 2 References . 8 2.1 Normative references . 9 2.2 Informative references . 9 3 Definitions and abbreviations . 9 3.1 Definitions . 9 3.2 Abbreviations . 11 4 Technical requirement specifications . 11 4.1 Environment profile . 11 4.2 Conformance requirements . 12 4.2.1 Unwanted emissions outside the band 1 626,5 MHz to 1 660,5 MHz and outside the band 1 668,0 MHz to 1 675,0 MHz (carrier-on state) . 12 4.2.1.1 Justification . 12 4.2.1.2 Technical requirements . 12 4.2.1.3 Conformance test . 15 4.2.2 Unwanted emissions within the bands 1 626,5 MHz to 1 660,5 MHz and 1 660,5 MHz to 1 662,5 MHz and within the bands 1 666,0 MHz to 1 668,0 MHz, 1 668,0 MHz to 1 675,0 MHz and 1 675,0 MHz to 1 677,0 MHz (carrier-on state) . 15 4.2.2.1 Justification . 15 4.2.2.2 Technical requirements . 16 4.2.2.3 Conformance test . 17 4.2.3 Unwanted emissions in carrier-off state . 17 4.2.3.1 Justification . 17 4.2.3.2 Technical requirements . 18 4.2.3.3 Conformance test . 18 4.2.4 MES Control and Monitoring Functions (CMF) . 18 4.2.4.1 Self-monitoring functions/Processor monitoring . 18 4.2.4.1.1 Justification . 18 4.2.4.1.2 Technical requirements. 18 4.2.4.1.3 Conformance test . 18 4.2.4.2 Self-monitoring functions/Transmit frequency generation sub-system monitoring . 19 4.2.4.2.1 Justification . 19 4.2.4.2.2 Technical requirements. 19 4.2.4.2.3 Conformance test . 19 4.2.4.3 Network control authorization . 19 4.2.4.3.1 Justification . 19 4.2.4.3.2 Technical requirements. 19 4.2.4.3.3 Conformance test . 19 4.2.4.4 Network control reception . 19 4.2.4.4.1 Transmission disable/enable . 19 4.2.4.4.2 Transmit frequency control . 20 4.2.4.5 Fellow radio stations in a dual-mode or multimode terminal . 20 4.2.4.5.1 Justification . 20 4.2.4.5.2 Technical requirements. 20 4.2.4.5.3 Conformance test . 20 4.2.5 Equipment identity . 21 4.2.5.1 Justification . 21 4.2.5.2 Technical requirements . 21 4.2.5.3 Conformance test . 21 SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 4 4.2.6 Protection of the radio astronomy service operation in the band 1 660 MHz to 1 660,5 MHz and in the band 1 668,0 MHz to 1 670,0 MHz . 21 4.2.6.1 Purpose . 21 4.2.6.2 Technical requirements . 21 4.2.6.3 Conformance test . 21 5 Testing for compliance with technical requirements . 21 5.1 Environmental conditions for testing . 21 5.2 Essential radio test suites . 22 5.2.1 General . 22 5.2.1.1 Description of equipment . 22 5.2.1.2 Testing of host-connected equipment and plug-in modules . 23 5.2.1.2.1 Alternative approaches . 23 5.2.1.2.2 Alternative A: combined equipment . 23 5.2.1.2.3 Alternative B: use of a test jig . 23 5.2.1.3 CMF/Special Test Equipment (STE) . 23 5.2.1.4 General test requirements . 23 5.2.1.4.1 MES test modes . 23 5.2.1.4.2 Special Test Equipment (STE) . 24 5.2.1.4.3 Laboratory Test Equipment (LTE) . 25 5.2.1.4.4 Methods of test for MES RF emissions according to the equipment type . 25 5.2.1.4.5 Procedures for measurement of radiated emissions . 25 5.2.1.4.6 Procedures for measurement of conducted emissions . 30 5.2.1.4.7 Interpretation of the measurement results . 32 5.2.1.4.8 Test report . 32 5.2.2 Unwanted emissions outside the band 1 626,5 MHz to 1 660,5 MHz and outside the band 1 668,0 MHz to 1 675,0 MHz (carrier-on state) . 32 5.2.2.1 Method of test . 32 5.2.2.2 Peak measurement . 33 5.2.2.3 Average measurement . 33 5.2.2.4 Test requirements . 34 5.2.3 Unwanted emissions within the band 1 626,5 MHz to 1 660,5 MHz and the band 1 624,5 MHz to 1 626,5 MHz and 1 660,5 MHz to 1 662,5 MHz and within the band 1 668,0 MHz to 1 675,0 MHz and the band 1 666,0 MHz to 1 668,0 MHz and 1 675,0 MHz to 1 677,0 MHz (carrier-on state) . 34 5.2.3.1 Method of test . 34 5.2.3.2 Measurement method . 35 5.2.3.3 Test requirements . 35 5.2.4 Unwanted emissions in carrier-off state . 35 5.2.4.1 Method of test . 35 5.2.4.2 Measurement method . 36 5.2.4.3 Test requirements . 36 5.2.5 MES Control and Monitoring Functions (CMF) . 36 5.2.5.1 Self-monitoring functions/Processor monitoring . 36 5.2.5.2 Self-monitoring functions/Transmit frequency generation sub-system monitoring . 36 5.2.5.3 Network control authorization . 36 5.2.5.3.1 Method of test . 36 5.2.5.3.2 Test procedure . 37 5.2.5.3.3 Test requirements . 37 5.2.5.4 Network control reception . 37 5.2.5.4.1 Transmission disable/enable . 37 5.2.5.4.2 Transmit frequency control . 38 5.2.5.5 Fellow radio stations in a dual-mode or multimode terminal . 39 5.2.5.5.1 Method of test . 39 5.2.5.5.2 Test procedure . 39 5.2.5.5.3 Test requirements . 39 5.2.6 Equipment identity . 39 5.2.6.1 Method of test . 39 5.2.6.2 Test procedure . 40 5.2.6.3 Test requirements . 40 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 41 SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 5 Annex B (informative): The EN title in the official languages . 44 Annex C (informative): Bibliography . 45 History . 46
SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Directive 98/34/EC [7] as amended by Directive 98/48/EC [8]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [1]. See article 5.1 of Directive 1999/5/EC [1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [1] are summarised in annex A.
National transposition dates Date of adoption of this EN: 18 November 2011 Date of latest announcement of this EN (doa): 29 February 2012 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 August 2012 Date of withdrawal of any conflicting National Standard (dow): 31 August 2013
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [1]. The modular structure is shown in EG 201 399 [i.1]. The determination of the parameters of the user earth stations using a given satellite for the protection of the spectrum allocated to that satellite, is considered to be under the responsibility of the satellite operator or the satellite network operators. The present document specifies new emission requirements for MESs that are capable of transmitting in the frequency band from 1 668,0 MHz to 1 675,0 MHz. Following the WRC-03 decision to allocate to MSS the bands 1 518 MHz to 1 525 MHz (space to Earth) and 1 668 MHz to 1 675 MHz (Earth to space) and the conclusions of WRC-07, the present document specifies the necessary requirements to harmonise the use of these extended frequency bands by MESs.
The present document treats the two parts of the L-band frequency allocation (as extended) as two sub-bands which may be used separately or in any combination. The original L-band allocation is referenced in the present document as "sub-band 1" and the extended L-band is referenced as "sub-band 2". SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 7 A new table (table 3a) is added to the present document for MESs that are capable of transmitting in any combination of either or both of these sub-bands. The new table 3a is recommended for all new MESs, including MESs that can only operate in sub-band 1. The applicant may choose between table 3 and table 3a for new MESs that are capable of transmitting in only the sub-band 1: the applicant has to declare which alternative is used.
The technical requirements in the present document are applied under article 3.2 of the R&TTE Directive [1], concerning the effective uses of the spectrum allocated to terrestrial/space radio communication and orbital resources so as to avoid harmful interference. These requirements are in two major categories: • emissions limits: to protect other radio services from harmful interference generated by the MES in normal use; • MES Control and Monitoring Functions (CMF): to protect other radio services from unwanted transmissions from the MES. The CMF in each MES is capable of answering to commands from the Network Control Facilities (NCF) for its S-PCN. NOTE: The requirements for Network Control Facilities (NCF) for S-PCN are contained in EN 301 682 [i.2]. The determination of the parameters of the user earth stations using a given satellite for the protection of the spectrum allocated to that satellite, is considered to be under the responsibility of the satellite operator or the satellite network operators. Figure 1: Void SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 8 1 Scope The present document applies to S-PCN MES for Geostationary mobile satellite systems with an EIRP less than or equal to 15 dBW. The present document sets out the minimum performance requirements and technical characteristics of Mobile Earth Stations (MES) with both transmit and receive capabilities for operation in a Satellite Personal Communication Network (S-PCN) in any combination of all or any part of the Mobile Satellite Service (MSS) frequency bands sub-band 1 and sub-band 2 defined in table 1. Table 1: Mobile Satellite Service (MSS) frequency band Sub-band Transmission path MSS frequency band 1 MESs transmit 1 1 626,5 MHz to 1 660,5 MHz MESs receive 1 1 525 MHz to 1 559 MHz 2 MESs transmit 2 1 668,0 MHz to 1 675,0 MHz MESs receive 2 1 518,0 MHz to 1 525,0 MHz
An S-PCN MES may be handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed equipment, or may be an element in a multimode terminal; it may consist of a number of modules with associated connections and user interface, or may be a self contained single unit. If the MES is an element in a multimode terminal, unless otherwise stated in the present document, its requirements apply only to the S-PCN MES element of the terminal operating in the MSS frequency band given in table 1. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2 which states that "….radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document. NOTE 1: A list of such ENs is included on the web site http://www.newapproach.org. NOTE 2: These MESs are controlled and monitored by a Network Control Facility (NCF). The NCF is outside the scope of the present document. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. SIST EN 301 681 V1.4.1:2012



ETSI ETSI EN 301 681 V1.4.1 (2011-11) 9 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [2] Void. [3] Void. [4] ITU-T Recommendation O.153 (1992): "Basic parameters for the measurement of error performance at bit rates below the primary rate". [5] CISPR 16-1-4 (2010): "Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus- Antennas and test sites for radiated disturbance measurements". [6] Void. [7] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [8] Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the R&TTE Directive". [i.2] ETSI EN 301 682: "Satellite Personal Communications Networks (S-PCN); Network Control Facilities (NCF) for Mobile Earth Stations (MESs), including handheld earth stations, for S-PCN in the 1,5/1,6 GHz bands, providing voice and/or data communications under the Mobile Satellite Service (MSS)". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following apply: 3dB Bandwidth (B3dB): t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.