Geographic information - Spatial referencing by geographic identifiers (ISO 19112:2019)

This Standard defines the conceptual schema for spatial references based on geographic identifiers. It establishes a general model for spatial referencing using geographic identifiers and defines the components of a spatial reference system. It also specifies a conceptual scheme for a gazetteer. Spatial referencing by coordinates is addressed in ISO 19111. However, a mechanism for recording complementary coordinate references is included in this document. This document enables producers of data to define spatial reference systems using geographic identifiers and assists users in understanding the spatial references used in datasets. It enables gazetteers to be constructed in a consistent manner and supports the development of other standards in the field of geographic information. This document is applicable to digital geographic data, and its principles may be extended to other forms of geographic data such as maps, charts and textual documents.

Geoinformation - Raumbezug mit (geographischen) Identifikatoren (ISO 19112:2019)

Information géographique - Système de références spatiales par identificateurs géographiques (ISO 19112:2019)

Le présent document définit le schéma conceptuel d'un système de références spatiales basé sur des identificateurs géographiques. Il établit un modèle général du système de références spatiales utilisant des identificateurs géographiques et définit les composants de ce système. Il spécifie également le schéma conceptuel d'un répertoire géographique.
Le système de références spatiales par coordonnées est traité dans l'ISO 19111. Un mécanisme destiné à l'enregistrement de coordonnées de référence complémentaires est toutefois inclus dans le présent document.
Le présent document permet aux producteurs de données de définir des systèmes de références spatiales utilisant des identificateurs géographiques et aide les utilisateurs à comprendre les références spatiales utilisées dans les ensembles de données. Il permet de construire des répertoires géographiques de manière cohérente et soutient le développement d'autres normes dans le domaine de l'information géographique.
Le présent document est applicable aux données géographiques numériques et ses principes peuvent être élargis à d'autres types de données géographiques tels que les cartes, les tableaux et les textes.

Geografske informacije - Lociranje z geografskimi identifikatorji (ISO 19112:2019)

Ta standard določa pojmovno shemo lociranja na podlagi geografskih identifikatorjev. Vzpostavlja splošni model lociranja z uporabo geografskih identifikatorjev in opredeljuje sestavne dele sistema lociranja. Določa tudi pojmovno shemo geografskega leksikona. Lociranje s koordinatami je obravnavano v standardu ISO 19111. Vendar je v ta dokument vključen tudi mehanizem za beleženje dopolnilnih koordinatnih referenc. Ta dokument omogoča proizvajalcem podatkov, da določijo sisteme lociranja z uporabo geografskih identifikatorjev, in pomaga uporabnikom, da razumejo sistem lociranja, ki se uporablja v naborih podatkov. Omogoča dosledno sestavljanje geografskega leksikona in podpira razvoj drugih standardov na področju geografskih informacij. Ta dokument se uporablja za digitalne geografske podatke in v njem opisana načela lahko veljajo tudi za druge oblike geografskih podatkov, kot so zemljevidi, karte in dokumenti z besedilom.

General Information

Status
Published
Public Enquiry End Date
14-Mar-2018
Publication Date
09-Oct-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Sep-2019
Due Date
25-Nov-2019
Completion Date
10-Oct-2019

Relations

Buy Standard

Standard
EN ISO 19112:2019
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19112:2019
01-november-2019
Nadomešča:
SIST EN ISO 19112:2005
Geografske informacije - Lociranje z geografskimi identifikatorji (ISO 19112:2019)
Geographic information - Spatial referencing by geographic identifiers (ISO 19112:2019)
Geoinformation - Raumbezug mit (geographischen) Identifikatoren (ISO 19112:2019)
Information géographique - Système de références spatiales par identificateurs
géographiques (ISO 19112:2019)
Ta slovenski standard je istoveten z: EN ISO 19112:2019
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19112:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19112:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 19112:2019


EN ISO 19112
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19112:2005
English Version

Geographic information - Spatial referencing by
geographic identifiers (ISO 19112:2019)
Information géographique - Système de références Geoinformation - Raumbezug mit (geographischen)
spatiales par identificateurs géographiques (ISO Identifikatoren (ISO 19112:2019)
19112:2019)
This European Standard was approved by CEN on 26 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19112:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19112:2019
EN ISO 19112:2019 (E)
Contents Page
European foreword . 3
Endorsement notice . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19112:2019
EN ISO 19112:2019 (E)
European foreword
This document (EN ISO 19112:2019) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19112:2005.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19112:2019 has been approved by CEN as EN ISO 19112:2019 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 19112:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 19112:2019
INTERNATIONAL ISO
STANDARD 19112
Second edition
2019-02
Geographic information — Spatial
referencing by geographic identifiers
Information géographique — Système de références spatiales par
identificateurs géographiques
Reference number
ISO 19112:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 19112:2019
ISO 19112:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 19112:2019
ISO 19112:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and notation . 1
3.1 Terms and definitions . 1
3.2 Conceptual schema notation . 2
4 Conformance . 2
4.1 General . 2
4.2 Spatial reference system using geographic identifiers conformance class . 2
4.3 Gazetteer conformance class . 3
5 Conceptual schema overview . 3
6 Requirements for spatial reference systems using geographic identifiers.4
6.1 Spatial reference system using geographic identifiers . 4
6.2 Conceptual schema for spatial referencing using geographic identifiers . 4
6.3 Object Type: SpatialReferenceSystemUsingGeographicIdentifiers . 5
6.4 Object Type: LocationClass. 6
7 Requirements for a gazetteer. 7
7.1 Overview . 7
7.2 Conceptual schema for gazetteers . 7
7.3 Object Type: Gazetteer . 9
7.4 Object Type: Location.10
7.5 Object Type: GeographicIdentifier .11
Annex A (normative) Abstract test suites .13
Annex B (informative) Example spatial reference systems using geographic identifiers .14
Annex C (informative) Examples of gazetteer data .16
Annex D (informative) Backward compatibility .17
Bibliography .20
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 19112:2019
ISO 19112:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
This second edition cancels and replaces the first edition (ISO 19112:2003), which has been technically
revised.
The main changes compared to the first edition are as follows:
— revision of the conceptual schema to meet current standards and harmonise with other ISO/TC 211
standards;
— introduction of the class LocationClass to replace the class SI_LocationType;
— introduction of the class Location to replace the class SI_LocationInstance;
— introduction of the class SpatialReferenceSystemUsingGeographicIdentifiers to replace the class
SI_SpatialReferenceSystemUsingGeographicIdentifiers;
— introduction of the class Gazetteer to replace the class SI_Gazetteer;
— introduction of the class GeographicIdentifier;
— recognition that a gazetteer is a sub-type of Register as defined in ISO 19135-1, and that Location
Class is an ItemClass and Location a RegisterItem in that context;
— changes to package identifiers.
The changes are elaborated in Annex D.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 19112:2019
ISO 19112:2019(E)

Introduction
Geographic information contains spatial references that relate information represented in data or text
to positions in geographic space.
Spatial references fall into two categories:
a) those using coordinates;
b) those using geographic identifiers.
This document deals only with spatial referencing by geographic identifiers. This type of spatial
reference is sometimes called “indirect”. Spatial referencing by coordinates is the subject of ISO 19111.
Spatial reference systems using geographic identifiers are based not explicitly on coordinates but on a
relationship with a location defined by a geographic feature or features. The relationship of the position
to the feature may be as follows:
— containment, where the position is within the geographic feature, for example in a country;
— local measurements, where the position is defined relative to a fixed point or points in the geographic
feature or features, for example at a given distance along a street from a junction with another
street. This aspect, known as linear referencing, is the subject of ISO 19148;
— loosely related, where the position has a fuzzy relationship with the geographic feature or features,
for example adjacent to a building or between two buildings.
The purpose of this document is to specify ways to define and describe systems of spatial references
using geographic identifiers. It only covers the definition and recording of the referencing feature, and
does not consider the forms of the relationship of the position relative to that feature.
A spatial reference system using geographic identifiers is a collection of Location classes of different
sub-types, while a gazetteer is a collection of Location instances (of one or more Location sub-types).
A common form of spatial referencing system using geographic identifiers is addressing. This is the
subject of ISO 19160-1.
© ISO 2019 – All rights reserved v

---------------------- Page: 11 ----------------------
SIST EN ISO 19112:2019

---------------------- Page: 12 ----------------------
SIST EN ISO 19112:2019
INTERNATIONAL STANDARD ISO 19112:2019(E)
Geographic information — Spatial referencing by
geographic identifiers
1 Scope
This document defines the conceptual schema for spatial references based on geographic identifiers.
It establishes a general model for spatial referencing using geographic identifiers and defines the
components of a spatial reference system. It also specifies a conceptual scheme for a gazetteer.
Spatial referencing by coordinates is addressed in ISO 19111. However, a mechanism for recording
complementary coordinate references is included in this document.
This document enables producers of data to define spatial reference systems using geographic
identifiers and assists users in understanding the spatial references used in datasets. It enables
gazetteers to be constructed in a consistent manner and supports the development of other standards
in the field of geographic information.
This document is applicable to digital geographic data, and its principles may be extended to other
forms of geographic data such as maps, charts and textual documents.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 19107:2003, Geographic information — Spatial schema
ISO 19111:2007, Geographic information — Spatial referencing by coordinates
ISO 19115-1:2014, Geographic information — Metadata — Part 1: Fundamentals
ISO 19135-1:2015, Geographic information — Procedures for item registration — Part 1: Fundamentals
3 Terms, definitions and notation
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http: //www .electropedia .org/
— ISO Online browsing platform: available at http: //www .iso .org/obp
3.1.1
gazetteer
register of location instances of one or more location sub-types, containing some information regarding
position
Note 1 to entry: The positional information need not be coordinates, but could be descriptive.
© ISO 2019 – All rights reserved 1

---------------------- Page: 13 ----------------------
SIST EN ISO 19112:2019
ISO 19112:2019(E)

3.1.2
geographic identifier
spatial reference in the form of a label or code that identifies a location
EXAMPLE “Spain” is an example of a label (country name); “SW1P 3AD” is an example of a code (postcode).
3.1.3
location
particular place or position
Note 1 to entry: A location identifies a geographic place.
EXAMPLE “Madrid”, “California”.
3.1.4
spatial reference
description of position in the real world
Note 1 to entry: This may take the form of a label, code or coordinate tuple.
[SOURCE: ISO 19111:2007, 4.43]
3.2 Conceptual schema notation
Several model elements used in this document are defined in packages specified in other International
Standards; these are listed in Table 1.
Table 1 — Packages defined in other International Standards
Prefix Package International standard
EX Extent ISO 19115-1
CI Citation ISO 19115-1
CRS Coordinate Reference System ISO 19111
GM Geometry ISO 19107
MD Metadata ISO 19115-1
RE Register ISO 19135-1
4 Conformance
4.1 General
Two classes of conformance are defined for this document:
— Spatial reference system using geographic identifiers — the minimum requirements for establishing
a spatial reference system using geographic identifiers;
— Gazetteer — the minimum requirements for establishing a gazetteer.
4.2 Spatial reference system using geographic identifiers conformance class
Table 2 defines the characteristics of the spatial reference system using geographic identifiers
conformance class.
2 © ISO 2019 – All rights reserved

---------------------- Page: 14 ----------------------
SIST EN ISO 19112:2019
ISO 19112:2019(E)

Table 2 — Spatial reference system using geographic identifiers conformance class
Conformance class identifier
-1/2/conf/srs>
Spatial reference system using geographic
Standardization target
identifiers
Dependency None
Requirements All requirements in Clause 6
Requirements class identifier
-1/2/req/srs>
Tests All tests in A.1
4.3 Gazetteer conformance class
Table 3 defines the characteristics of the gazetteer conformance class.
Table 3 — Gazetteer conformance class
Conformance class identifier
-1/2/conf/gaz>
Standardization target Gazetteer
Dependency None
Requirements All requirements in Clause 7
Requirements class identifier
-1/2/req/gaz>
Tests All tests in A.2
5 Conceptual schema overview
Clauses 6 and 7 specify a conceptual schema (expressed in UML) for
— a spatial referencing system using geographic identifiers, and
— a gazetteer.
An overview of the schema is provided in Figure 1. The classes originating in this document (depicted
by unshaded boxes in Figures 1, 2 and 3) are elaborated in Figures 2 and 3 and are fully specified in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.