SIST EN 12847:2009
(Main)Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
This European Standard specifies a method for the determination of the settling tendency of bituminous emulsions.
WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige bindemittel - Bestimmung des Absetzverhaltens von Bitumenemulsionen
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Absetzverhaltens von Bitumenemulsionen fest.
WARNUNG - Die Anwendung dieser Norm kann den Umgang mit gefährlichen Substanzen und Aus¬rüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Norm, geeignete Verhaltensregeln für den Arbeits- und Gesundheitsschutz festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de la tendance à la décantation des émulsions de bitume
La présente norme européenne prescrit une méthode pour la détermination de la tendance à la décantation
des émulsions de bitume.
AVERTISSEMENT - L'utilisation de la présente norme peut impliquer l'intervention de produits,
d'opérations et d'équipements à caractère dangereux. La présente norme n'a pas la prétention
d'aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de
l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer
l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje težnje bitumenskih emulzij k posedanju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SRVHGDQMXBitumen und bitumenhaltige bindemittel - Bestimmung des Absetzverhaltens von BitumenemulsionenBitumes et liants bitumineux - Détermination de la tendance à la décantation des émulsions de bitumeBitumen and bituminous binders - Determination of settling tendency of bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 12847:2009SIST EN 12847:2009en,fr,de01-julij-2009SIST EN 12847:2009SLOVENSKI
STANDARDSIST EN 12847:20031DGRPHãþD
SIST EN 12847:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12847March 2009ICS 75.140; 91.100.50Supersedes EN 12847:2002
English VersionBitumen and bituminous binders - Determination of settlingtendency of bituminous emulsionsBitumes et liants bitumineux - Détermination de la tendanceà la décantation des émulsions de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung desAbsetzverhaltens von BitumenemulsionenThis European Standard was approved by CEN on 17 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12847:2009: ESIST EN 12847:2009
EN 12847:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .4 5 Reagents and materials .4 6 Apparatus .5 7 Sampling .5 8 Procedure .5 9 Calculation .6 10 Expression of results .6 11 Precision .6 12 Test report .7 Bibliography .9
SIST EN 12847:2009
EN 12847:2009 (E) 3 Foreword This document (EN 12847:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12847:2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12847:2009
EN 12847:2009 (E) 4 1 Scope This European Standard specifies a method for the determination of the settling tendency of bituminous emulsions. WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 1428, Bitumen and bituminous binders – Determination of water content in bitumen emulsions – Azeotropic distillation method EN 1431, Bitumen and bituminous binders – Determination of recovered binder and oil distillate from bitumen emulsions by distillation EN 125
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SRVHGDQMXBitumen und bitumenhaltige bindemittel - Bestimmung des Absetzverhaltens von BitumenemulsionenBitumes et liants bitumineux - Détermination de la tendance à la décantation des émulsions de bitumeBitumen and bituminous binders - Determination of settling tendency of bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:prEN 12847kSIST prEN 12847:2008en,fr,de01-december-2008kSIST prEN 12847:2008SLOVENSKI
STANDARD
kSIST prEN 12847:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 12847October 2008ICS 75.140; 91.100.50Will supersede EN 12847:2002
English VersionBitumen and bituminous binders - Determination of settlingtendency of bituminous emulsionsBitumes et liants bitumineux - Détermination de la tendanceà la décantation des émulsions de bitumeBitumen und bitumenhaltige bindemittel - Bestimmung desAbsetzverhaltens von BitumenemulsionenThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 336.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 12847:2008: EkSIST prEN 12847:2008
prEN 12847:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Reagents and materials.4 6 Apparatus.5 7 Sampling.5 8 Procedure.5 9 Calculation.6 10 Expression of results.6 11 Precision.6 12 Test report.7 Bibliography.9
kSIST prEN 12847:2008
prEN 12847:2008 (E) 3 Foreword This document (prEN 12847:2008) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12847:2002. kSIST prEN 12847:2008
prEN 12847:2008 (E) 4 1 Scope This European Standard specifies a method for the determination of the settling tendency of bituminous emulsions. WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 1428, Bitumen and bituminous binders – Determination of water content in bitumen emulsions – Azeotropic distillation method EN 1431, Bitumen and bituminous binders – Determination of recovered binder and oil distillate from bitumen emulsions by distillation EN 12594, Bitumen and bituminous binders – Preparation of test samples EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696:1987) 3 Terms and definitions For the purposes of thi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.