Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C

This document specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, in heat resisting steel, silver plated.
Classification: 600 MPa/425 °C.

Luft- und Raumfahrt - Flache Sechskantmuttern, kleine Schlüsselweite, aus hochwarmfestem Stahl, versilbert - Klasse: 600 MPa (bei Raumtemperatur) / 425 °C

Série aérospatiae - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en acier résistant à chaud, argentés - Classification: 600 MPa (à température ambiante) / 425 °C

Aeronavtika - Matice, šestrobe, drsne, z zmanjšanim zevom ključa, iz toplotnoodpornega jekla, posrebrene - Klasifikacija: 600 MPa (pri okoljski temperaturi)/425 °C

Ta dokument določa lastnosti šestrobih drsnih matic zmanjšane višine, z zmanjšanim zevom ključa, iz toplotnoodpornega jekla, posrebrenih.
Klasifikacija: 600 MPa/425 °C.

General Information

Status
Published
Publication Date
14-Apr-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Apr-2019
Due Date
16-Jun-2019
Completion Date
15-Apr-2019

Buy Standard

Standard
EN 2923:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2923:2019
01-junij-2019
Aeronavtika - Matice, šestrobe, drsne, z zmanjšanim zevom ključa, iz
toplotnoodpornega jekla, posrebrene - Klasifikacija: 600 MPa (pri okoljski
temperaturi)/425 °C
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat
resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C
Luft- und Raumfahrt - Flache Sechskantmuttern, kleine Schlüsselweite, aus
hochwarmfestem Stahl, versilbert - Klasse: 600 MPa (bei Raumtemperatur) / 425 °C
Série aérospatiae - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en
acier résistant à chaud, argentés - Classification: 600 MPa (à température ambiante) /
425 °C
Ta slovenski standard je istoveten z: EN 2923:2019
ICS:
21.060.20 Matice Nuts
49.030.30 Matice Nuts
SIST EN 2923:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2923:2019

---------------------- Page: 2 ----------------------

SIST EN 2923:2019


EN 2923
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 49.030.30
English Version

Aerospace series - Nuts, hexagon, plain, reduced height,
reduced across flats, in heat resisting steel, silver plated -
Classification: 600 MPa (at ambient temperature) / 425 °C
Série aérospatiae - Écrous hexagonaux ordinaires, Luft- und Raumfahrt - Flache Sechskantmuttern, kleine
hauteur réduite, surplats réduits, en acier résistant à Schlüsselweite, aus hochwarmfestem Stahl, versilbert -
chaud, argentés - Classification: 600 MPa (à Klasse: 600 MPa (bei Raumtemperatur) / 425 °C
température ambiante) / 425 °C
This European Standard was approved by CEN on 8 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2923:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2923:2019
EN 2923:2019 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Designation. 8
6 Marking . 8
7 Technical specification . 8



2

---------------------- Page: 4 ----------------------

SIST EN 2923:2019
EN 2923:2019 (E)
European foreword
This document (EN 2923:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.