SIST EN 10225-2:2019

Oznaka standarda: SIST EN 10225-2:2019
Koda projekta: EC103114
Organizacija: SIST
Naslov (angleški): Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections
Naslov (slovenski): Konstrukcijska jekla za varjene konstrukcije naftnih ploščadi - Tehnični dobavni pogoji - 2. del: Profili
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 10225-2:2019 angleški jezik Active SIST-I: 71.00 EUR
PDF
Papir
Tehnični odbor: IFEK - Železne kovine
ICS: 75.180.10 77.140.10 77.140.70
Status: Objavljen
Objavljen: 01-jul-2019
Refer. št. objave: Sporocila 2019-07
Področje projekta (angleško): This part of EN 10225 specifies requirements for weldable structural steels to be used in the fabrication of fixed offshore structures in the form of sections (e.g. H-, I-, Z-sections, U-channels, angles and tees) excluding hollow sections. The thickness limitation in this standard is up to and including 63 mm. For steel qualities with mechanical properties in the transverse direction (named xL2O) sections with flange widths smaller than 180 mm and channels with flange smaller widths than 90 mm cannot be ordered. Greater thicknesses may be agreed, provided the technical requirements of this European Standard are maintained. The standard is applicable to steels for offshore structures, designed to operate in the offshore sector but not to steels supplied for the fabrication of subsea pipelines, risers, process equipment, process piping and other utilities. It is primarily applicable to the North Sea Sector, but may also be applicable in other areas provided that due consideration is given to local conditions e. g. temperature. NOTE There is an Annex E on the prequalification of steels for fixed offshore structures in arctic areas. Minimum yield strengths up to 460 MPa are specified together with low temperature impact properties at temperatures down to -40 °C.
Povezava na standarde
Povezava Ime Datum
Revidiran SIST EN 10225:2009 - Konstrukcijska jekla za varjene konstrukcije naftnih ploščadi - Tehnični dobavni pogoji 07-okt-2015
Nadomešča SIST EN 10225:2009 - Konstrukcijska jekla za varjene konstrukcije naftnih ploščadi - Tehnični dobavni pogoji 22-maj-2019


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi