SIST EN 15272-2:2007
(Main)Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead
Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead
This European Standard specifies requirements for fairleads on inland navigation vessels. It applies to fairleads for guiding ropes perpendicularly to the fairlead axis. It is used, for example, for hauling, mooring and coupling inland navigation vessels. These fairleads shall not form any rope guides where a rope end is led at an angle (e.g. on shore). In this case, a fairlead shall only be used in conjunction with other components that ensure the rope is guided perpendicularly to the axis of the fairlead.
Fahrzeuge der Binnenschifffahrt - Ausrüstung zur Seilführung - Teil 2: Umlenkrolle
Diese Europäische Norm legt Anforderungen an Umlenkrollen auf Fahrzeugen der Binnenschifffahrt fest. Sie gilt für Umlenkrollen zum Umlenken von Seilen senkrecht zur Achse der Umlenkrolle.
Bateaux de navigation intérieure - Equipement de guidage de câble - Partie 2: Chaumard a rouleaux
La présente Norme européenne spécifie les exigences relatives aux poulies de renvoi équipant des bâtiments de la navigation intérieure. Elle s’applique aux poulies destinées au renvoi des câbles/cordages perpendiculairement à l’axe de la poulie.
Plovila za celinske vode - Vodilo za vrv - 2. del: Obračalni kolut
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Inland navigation vessels - Equipment for rope leading - Part 2: FairleadXWBateaux de navigation intérieure - Equipement de guidage de câble - Partie 2: Chaumard a rouleauxFahrzeuge der Binnenschifffahrt - Ausrüstung zur Seilführung - Teil 2: UmlenkrolleTa slovenski standard je istoveten z:EN 15272-2:2007SIST EN 15272-2:2007en47.060Inland navigation vessels47.020.50Palubna oprema ter napraveDeck equipment and installationsICS:SLOVENSKI
STANDARDSIST EN 15272-2:200701-maj-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15272-2March 2007ICS 47.020.50; 47.060 English VersionInland navigation vessels - Equipment for rope leading - Part 2:FairleadBateaux de navigation intérieure - Equipement de guidagede câble - Partie 2: Chaumard à rouleauxFahrzeuge der Binnenschifffahrt - Ausrüstung zurSeilführung - Teil 2: UmlenkrolleThis European Standard was approved by CEN on 3 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15272-2:2007: E
EN 15272-2:2007 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Safety requirements.6 4.1 Dimensions.6 4.2 Strength.7 4.3 Material.7 4.4 Corrosion protection.7 4.5 Shaft bearing.7 4.6 Fixing holes.7 5 Test methods.7 5.1 General.7 5.2 Testing.7 6 Designation.8 6.1 Designation of a fairlead.8 6.2 Designation of a bush.8 7 Marking.8 8 Manufacturer's certificate.8 Annex A (informative)
Component parts of a fairlead made of cast steel.9 A.1 Materials.9 A.2 Component parts.10 A.2.1 Roller.10 A.2.2 Shaft.12 A.2.3 Bush for shaft.13 A.2.4 Bush for roller.13 A.2.5 Washer.14 Annex B (informative)
Example.15 B.1 Fairlead on deck.15 Bibliography.16
Figures Figure 1 — Fairlead.6 Figure A.1 — Roller, item 1, for nominal size 2-8.10 Figure A.2 — Roller, item 1, only for nominal size 1.11 Figure A.3 — Shaft, item 2.12 Figure A.4 — Bush for shaft, item 3.13 Figure A.5 — Bush for roller, item 4.13
EN 15272-2:2007 (E) 3 Figure A.6 — Washer, item 5.14 Figure B.1 — Fairlead on deck.15
Tables Table 1 — Main dimensions.7 Table A.1 — Materials.9 Table A.2 — Dimensions for roller (cast).11 Table A.3 — Shaft dimensions.12 Table A.4 — Dimensions for bushes and washer.14
EN 15272-2:2007 (E) 4 Foreword This document (EN 15272-2:2007) has been prepared by Technical Committee CEN/TC 15 “Inland navigation vessels”, t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.