SIST EN 289:2004

Oznaka standarda: SIST EN 289:2004
Koda projekta: 00145023
Organizacija: SIST
Naslov (angleški): Plastics and rubber machines - Presses - Safety requirements
Naslov (slovenski): Stroji za predelavo gume in plastike – Stiskalnice – Varnostne zahteve
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 289:2004 angleški jezik Withdrawn SIST-J: 96.80 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 25.120.10 83.200
Status: Razveljavljen
Objavljen: 01-nov-2004
Refer. št. objave: Sporocila 2004-11-01
Razveljavitev: 01-okt-2008
Referenca razveljavitve: Sporočila 2008-10
Referenčna oznaka: EN 289:2004
Področje projekta (angleško): This document specifies the essential safety requirements for hydraulic presses, including toggle and hydro-mechanic ones, with a vertical closing movement more than 6 mm for the moulding of plastics and/or rubber. This document covers both compression moulding (see 3.1.1) and transfer moulding (see 3.1.2). All hazards listed in clause 4 are covered by this document. The following machines are excluded: - injection moulding machines (see EN 201); - presses for curing pneumatic tyres; - presses for curing inner tubes and curing bags; - hydraulic presses as covered by EN 693; - mechanical presses as covered by EN 692; - thermoforming machines (see EN 12409); - RIM machines (see EN 1612-1 and EN 1612-2). The safety requirements for the additional hazards arising from the interaction between presses and ancillary equipment especially loading and unloading devices are specified. The safety requirements for the ancillary equipment itself are not specified. This document does not cover: - the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres; - requirements for the design of exhaust ventilation systems. This document is not applicable to presses manufactured before the date of publication of this document by CEN. - RIM machines (see EN 1612-1 and EN 1612-2). The safety requirements for the additional hazards arising from the interaction between presses and ancillary equipment especially loading and unloading devices are specified. The safety requirements for the ancillary equipment itself are not specified. This document does not cover: - the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres; - requirements for the design of exhaust ventilation systems. This document is not applicable to presses manufactured before the date of publication of this document by CEN.
Povezava na standarde
Povezava Ime Datum
Konsolidiran z SIST EN 289:2004+A1:2008 - Stroji za predelavo gume in plastike - Stiskalnice - Varnostne zahteve 01-okt-2008
Nadomešča SIST EN 289:2000 - Rubber and plastics machinery - Compression and transfer moulding presses - Safety requirements for the design 01-nov-2004


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi