SIST EN ISO 10320:2019

SLOVENSKI STANDARD
SIST EN ISO 10320:2019
01-junij-2019
1DGRPHãþD
SIST EN ISO 10320:1999
Geosintetika - Ugotavljanje na kraju uporabe (ISO 10320:2019)
Geosynthetics - Identification on site (ISO 10320:2019)
Geokunststoffe - Identifikation auf der Baustelle (ISO 10320:2019)
Géosynthétiques - Identification sur site (ISO 10320:2019)
Ta slovenski standard je istoveten z: EN ISO 10320:2019
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 10320:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10320:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 10320:2019


EN ISO 10320
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 59.080.70 Supersedes EN ISO 10320:1999
English Version

Geosynthetics - Identification on site (ISO 10320:2019)
Géosynthétiques - Identification sur site (ISO Geokunststoffe - Identifikation auf der Baustelle (ISO
10320:2019) 10320:2019)
This European Standard was approved by CEN on 11 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10320:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10320:2019
EN ISO 10320:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10320:2019
EN ISO 10320:2019 (E)
European foreword
This document (EN ISO 10320:2019) has been prepared by Technical Committee ISO/TC 221
"Geosynthetics" in collaboration with Technical Committee CEN/TC 189 “Geosynthetics” the secretariat
of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10320:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10320:2019 has been approved by CEN as EN ISO 10320:2019 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 10320:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 10320:2019
INTERNATIONAL ISO
STANDARD 10320
Third edition
2019-03
Geosynthetics — Identification on site
Géosynthétiques — Identification sur site
Reference number
ISO 10320:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------

SIST EN ISO 10320:2019
ISO 10320:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10320:2019
ISO 10320:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Identification . 2
4.1 Unique identification on delivery . 2
4.2 Product marking for identification on installation . 2
Bibliography . 3
© ISO 2019 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST
...