oSIST prEN 13445-11:2019
(Main)Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys
Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys
This Part 11 of this European Standard specifies requirements for unfired pressure vessels and their parts made of titanium and titanium alloys in addition to the general requirements for unfired pressure vessels under EN 13445:2014 Parts 1 to 5.
NOTE 1 Cast materials, HIP and additive manufacturing are not included in this version. Details regarding such materials will be subject to an amendment to or a revision of this European Standard.
NOTE 2 Materials in Groups 51.4 and 54 are not included in this version.
Unbefeuerte Druckbehälter - Teil 11: Zusätzliche Anforderungen an Druckbehälter aus Titan und Titanlegierungen
Dieser Teil 11 dieser Europäischen Norm legt die Anforderungen an unbefeuerte Druckbehälter und ihre Teile aus Titan oder Titanlegierungen zusätzlich zu den allgemeinen Anforderungen an unbefeuerte Druckbehälter nach EN 13445:2014, Teile 1 bis 5 fest.
ANMERKUNG 1 Gusswerkstoffe, HIP und additive Fertigung sind nicht in dieser Version enthalten. Einzelheiten zu diesen Werkstoffen werden einer Änderung oder Revision dieser Europäischen Norm unterliegen.
ANMERKUNG 2 Werkstoffe der Gruppen 51.4 und 54 sind nicht in dieser Version enthalten.
Récipients sous pression non soumis à la flamme - Partie 11 : Exigences complémentaires pour les récipients sous pression en titan et alliages de titan
Nekurjene tlačne posode - 11. del: Dodatne zahteve za tlačne posode iz titana in titanovih zlitin
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13445-11:2019
01-januar-2019
1HRJUHYDQH QHNXUMHQH WODþQHSRVRGHGHO 'RGDWQH]DKWHYH]DWODþQHSRVRGH
L]WLWDQDLQWLWDQRYLK]OLWLQ
Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of
titanium and titanium alloys
Unbefeuerte Druckbehälter - Teil 11: Zusätzliche Anforderungen an Druckbehälter aus
Titan und Titanlegierungen
Récipients sous pression non soumis à la flamme - Partie 11 : Exigences
complémentaires pour les récipients sous pression en titan et alliages de titan
Ta slovenski standard je istoveten z: prEN 13445-11
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
77.150.50 Titanovi izdelki Titanium products
oSIST prEN 13445-11:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13445-11:2019
---------------------- Page: 2 ----------------------
oSIST prEN 13445-11:2019
DRAFT
EUROPEAN STANDARD
prEN 13445-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 23.020.30
English Version
Unfired pressure vessels - Part 11: Additional
requirements for pressure vessels of titanium and
titanium alloys
Unbefeuerte Druckbehälter - Teil 11: Zusätzliche
Anforderungen an Druckbehälter aus Titan und
Titanlegierungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 54.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13445-11:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13445-11:2019
prEN 13445-11:2018 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and units . 6
4 General requirements . 6
5 Materials . 6
5.1 General . 6
5.2 Material specification . 6
5.3 Material grouping system . 7
5.4 Material documentation . 7
5.5 Prevention of brittle fracture .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.