oSIST prEN ISO 23063:2020

Oznaka standarda: oSIST prEN ISO 23063:2020
Koda projekta: 00202020
Organizacija: SIST
Naslov (angleški): Foundry machinery - Safety requirements for high pressure die casting machines (ISO/DIS 23063:2020)
Naslov (slovenski): Livarski stroji - Varnostne zahteve za stroje za tlačno litje (ISO/DIS 23063:2020)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
oSIST prEN ISO 23063:2020 angleški jezik Active SIST-I: 85.91 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 13.110 25.120.30 77.180
Status: Neobjavljen
Referenčna oznaka: prEN ISO 23063
Področje projekta (angleško): This document applies to high pressure die casting machines: a) hot-chamber die casting machines (horizontal or vertical die closing system), and b) horizontal/vertical cold-chamber die casting machines (horizontal or a vertical die closing system). It applies to high pressure die casting units, i.e., high pressure die casting machines (HPDCM) and their interfaces with the following ancillary equipment: c) die, d) melting, holding and dosing furnaces (see ISO 13577-1), e) metal feeding equipment, f) inserting and removal devices, g) spraying appliances, h) heat exchanger for the die. This ancillary equipment itself is not covered. Additional risks arising from the material being cast are not covered. This standard does not apply to low pressure die casting machines and/or gravity die casting machines. This standard deal with all significant hazards, hazardous situations and events relevant to pressure die casting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment
Povezava na standarde
Povezava Ime Datum
Revidiran SIST EN 869:2007+A1:2009 - Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin 06-feb-2019


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi