SIST EN IEC 60143-4:2024
(Main)Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (IEC 60143-4:2023)
Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (IEC 60143-4:2023)
This part of IEC 60143 specifies the testing of thyristor controlled series capacitor (TCSC)
installations used in series with transmission lines. This document also addresses issues that
consider ratings for TCSC thyristor valve assemblies, capacitors, and reactors as well as TCSC
control characteristics, protective features, cooling system and system operation.
Reihenkondensatoren für Starkstromanlagen - Teil 4: Thyristorgesteuerte Reihenkondensatoren (IEC 60143-4:2023)
Condensateurs série destinés à être installés sur des réseaux - Partie 4: Condensateurs série commandés par thyristors (IEC 60143-4:2023)
L'IEC 60143-4:2023 spécifie les essais à réaliser sur les installations de condensateurs série commandés par thyristors (CSCT) utilisées avec les lignes de transmission. Le présent document aborde également les questions liées aux caractéristiques assignées des assemblages de valve à thyristors pour CSCT, des condensateurs et des bobines d’inductance ainsi que les caractéristiques de commande des CSCT, les fonctions de protection, le système de refroidissement et le fonctionnement du système.
L'IEC 60143-4:2023 annule et remplace la première édition parue en 2010. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) les exigences d’essai de la valve à thyristors font référence à l’IEC 62823;
b) la Formule (1) au paragraphe 4.2 a été corrigée;
c) les essais dans la boucle du matériel (HIL, Hardware-In-the-Loop), paragraphe 7.5.4, remplacent l’essai du système de protection et de commande en temps réel spécifié précédemment, réalisé à l’aide d’un simulateur de réseau.
Zaporedni kondenzatorji za elektroenergetske sisteme - 4. del: Zaporedni kondenzatorji s tiristorskim upravljanjem (IEC 60143-4:2023)
Ta del standarda IEC 60143 določa preskuse inštalacij zaporednih kondenzatorjev s tiristorskim upravljanjem, ki se uporabljajo v sklopih s prenosnimi vodi. Ta dokument obravnava tudi zadeve v zvezi z ocenami sklopov, kondenzatorjev in reaktorjev tiristorskih ventilov zaporednih kondenzatorjev s tiristorskim upravljanjem in lastnostmi kontrole, zaščitnimi elementi, hladilnim sistemom in delovanjem sistema.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60143-4:2024
01-marec-2024
Zaporedni kondenzatorji za elektroenergetske sisteme - 4. del: Zaporedni
kondenzatorji s tiristorskim upravljanjem (IEC 60143-4:2023)
Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (IEC
60143-4:2023)
Reihenkondensatoren für Starkstromanlagen - Teil 4: Thyristorgesteuerte
Reihenkondensatoren (IEC 60143-4:2023)
Condensateurs série destinés à être installés sur des réseaux - Partie 4: Condensateurs
série commandés par thyristors (IEC 60143-4:2023)
Ta slovenski standard je istoveten z: EN IEC 60143-4:2024
ICS:
29.240.99 Druga oprema v zvezi z Other equipment related to
omrežji za prenos in power transmission and
distribucijo električne energije distribution networks
31.060.70 Močnostni kondenzatorji Power capacitors
SIST EN IEC 60143-4:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60143-4:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60143-4:2024
EUROPEAN STANDARD EN IEC 60143-4
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2024
ICS 29.240.99; 31.060.70 Supersedes EN 60143-4:2010
English Version
Series capacitors for power systems - Part 4: Thyristor controlled
series capacitors
(IEC 60143-4:2023)
Condensateurs série destinés à être installés sur des Reihenkondensatoren für Starkstromanlagen - Teil 4:
réseaux - Partie 4: Condensateurs série commandés par Thyristorgesteuerte Reihenkondensatoren
thyristors (IEC 60143-4:2023)
(IEC 60143-4:2023)
This European Standard was approved by CENELEC on 2024-01-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60143-4:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60143-4:2024
EN IEC 60143-4:2024 (E)
European foreword
The text of document 33/696/FDIS, future edition 2 of IEC 60143-4, prepared by IEC/TC 33 "Power
capacitors and their applications" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60143-4:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-18
document have to be withdrawn
This document supersedes EN 60143-4:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN 60143-1:2015, EN 60143-2:2013 and EN 60143-3:2015.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60143-4:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60060-2 NOTE Approved as EN 60060-2
IEC 60068-1 NOTE Approved as EN 60068-1
IEC 60068-3-3 NOTE Approved as EN IEC 60068-3-3
IEC 60721-1 NOTE Approved as EN 60721-1
IEC 61000-4-2 NOTE Approved as EN 61000-4-2
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60143-4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.