SIST EN 60191-6-1:2007

SLOVENSKI STANDARD
SIST EN 60191-6-1:2007
01-januar-2007
0HKDQVNDVWDQGDUGL]DFLMDSROSUHYRGQLãNLKHOHPHQWRYGHO6SORãQDSUDYLOD]D
SULSUDYRWHKQLþQLKULVERNURYRYSROSUHYRGQLãNLKHOHPHQWRY]DSRYUãLQVNR
PRQWDåR9RGLOR]DREOLNRYDQMHSULNOMXþNRYYREOLNLJROREMHJDNULOD,(&

Mechanical standardization of semiconductor devices -- Part 6-1: General rules for the
preparation of outline drawings of surface mounted semiconductor device packages -
Design guide for gull-wing lead terminals
Mechanische Normung von Halbleiterbauelementen -- Teil 6-1: Allgemeine Regeln für
die Erstellung von Gehäusezeichnungen von SMD-Halbleitergehäusen -
Konstruktionsleitfaden für Gehäuse mit Gullwing-Anschlüssen
Normalisation mécanique des dispositifs à semi-conducteurs -- Partie 6-1: Règles
générales pour la préparation des dessins d'encombrement des dispositifs à
semiconducteurs pour montage en surface - Guide de conception pour les boîtiers à
broches en forme d'ailes de mouette
Ta slovenski standard je istoveten z: EN 60191-6-1:2001
ICS:
01.100.25 5LVEHVSRGURþMD Electrical and electronics
HOHNWURWHKQLNHLQHOHNWURQLNH engineering drawings
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 60191-6-1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60191-6-1:2007

---------------------- Page: 2 ----------------------

SIST EN 60191-6-1:2007
EUROPEAN STANDARD EN 60191-6-1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2001
ICS 31.080.01
English version
Mechanical standardization of semiconductor devices
Part 6-1: General rules for the preparation of outline drawings
of surface mounted semiconductor device packages -
Design guide for gull-wing lead terminals
(IEC 60191-6-1:2001)
Normalisation mécanique des dispositifs à Mechanische Normung von
semi-conducteurs Halbleiterbauelementen
Partie 6-1: Règles générales Teil 6-1: Allgemeine Regeln für die
pour la préparation des dessins Erstellung von Gehäusezeichnungen
d'encombrement des dispositifs à von SMD-Halbleitergehäusen -
semiconducteurs pour montage en Konstruktionsleitfaden für Gehäuse mit
surface - Gullwing-Anschlüssen
Guide de conception pour les boîtiers à (IEC 60191-6-1:2001)
broches en forme d'ailes de mouette
(CEI 60191-6-1:2001)
This European Standard was approved by CENELEC on 2001-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60191-6-1:2001 E

---------------------- Page: 3 ----------------------

SIST EN 60191-6-1:2007
EN 60191-6-1:2001 - 2 -
Foreword
The text of document 47D/459/FDIS, future edition 1 of IEC 60191-6-1, prepared by SC 47D,
Mechanical standardization of semiconductor devices, of IEC TC 47, Semiconductor devices, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60191-6-1 on
2001-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-12-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60191-6-1:2001 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60191-6-1:2007
- 3 - EN 60191-6-1:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60191-6 1990 Mechanical standardization of --
semiconductor devices
Part 6: General rules for the preparation
of outline drawings of surface mounted
semiconductor device packages

---------------------- Page: 5 ----------------------

SIST EN 60191-6-1:2007

---------------------- Page: 6 ----------------------

SIST EN 60191-6-1:2007
INTERNATIONAL IEC
STANDARD
60191-6-1
First edition
2001-10
Mechanical standardization of semiconductor
devices –
Part 6-1:
General rules for the preparation of outline
drawings of surface mounted semiconductor
device packages –
Design guide for gull-wing lead terminals
Normalisation mécanique des dispositifs à semi-conducteurs –
Partie 6-1:
Règles générales pour la préparation des dessins
d'encombrement des dispositifs à semiconducteurs pour
montage en surface –
Guide de conception pour les boîtiers à broches
en forme d'ailes de mouette
 IEC 2001  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
G
International Electrotechnical Commission
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60191-6-1:2007
– 2 – 60191-6-1  IEC:2001(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES –
Part 6-1: General rules for the preparation of outline drawings
of surface mounted semiconductor device packages –
Design guide for gull-wing lead terminals
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Thei
...