SIST ISO 7-2:2001

Oznaka standarda: SIST ISO 7-2:2001
Koda projekta: 020820
Organizacija: SIST
Naslov (angleški): Pipe threads where pressure-tight joints are made on the threads -- Part 2: Verification by means of limit gauges
Naslov (slovenski): Cevni navoji s tesnjenjem na navojih - 2. del: Verifikacija z uporabo mejnih kalibrov
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST ISO 7-2:2001 angleški jezik Active SIST-G: 72.60 EUR
PDF
Papir
Tehnični odbor: TLP - Tlačne posode
ICS: 21.040.30
Status: Objavljen
Objavljen: 01-Sep-2001
Refer. št. objave: Sporocila 2001-09-01
Referenčna oznaka: ISO 7-2:2000
Področje projekta (angleško): This part of ISO 7 specifies a process using limit gauges, for the validation of taper internal and external threads and parallel internal threads on piping systems components and other products, the dimensions and tolerances of which are detailed in ISO 7-1. The gauging system described may not be suitable, without special precautions, for gauging of threads on injection moulded plastic workpieces. This part of ISO 7 does not cover completely all the requirements necessary for full control of thread quality and dimensions. Additional control of tools and equipment and visual inspection during production are required to ensure complete compliance with ISO 7-1, for example the length of useful thread on internally threaded workpieces should be checked by direct measurement. Annex A gives a summary of the gauges included in this part of ISO 7, together with details of the thread elements controlled by each gauge and gauge identification numbers. In the event of a dispute over compliance with the requirements of ISO 7-1, the gauges in this part of ISO 7 are to be considered as decisive for the thread elements which they control on the workpiece.
Povezava na standarde
Povezava Ime Datum
Revidiran ISO 7-2:1982 - Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges 15-Apr-2008


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi