Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015)

ISO 18314-1:2015 specifies the method for determining the colour coordinates of a paint film. This method is only applicable to paint films that appear to be uniformly of one colour, i.e. monochromatic, when examined with normal vision. Paint films that do not completely hide a non-transparent substrate represent an opaque system and can be measured by using the procedure in this part of ISO 18314.
Luminescent paint films, transparent paint films, and translucent paint films (for example for display or lamp glass), retroreflecting paint films (for example for traffic signs), and metallic paint films are outside the scope of this part of ISO 18314.

Analytische Farbmessung - Teil 1: Praktische Farbmessung (ISO 18314-1:2015)

Analyse colorimétrique - Partie 1: Mesurage pratique de la couleur (ISO 18314-1:2015)

La présente partie de l'ISO 18314 spécifie la méthode de détermination des coordonnées colorimétriques d'un feuil de peinture. Cette méthode n'est applicable qu'aux feuils de peinture dont la couleur semble uniforme à l'œil nu, c'est-à-dire aux feuils de peinture monochromatiques. Les feuils de peinture dont le pouvoir couvrant n'est pas suffisant pour masquer complètement un subjectile non transparent constituent un système opaque et peuvent être analysés en utilisant la méthode spécifiée dans la présente partie de l'ISO 18314.
Les feuils de peinture luminescents, transparents et translucides (par exemple, ceux sur un écran ou un verre d'ampoule), les feuils de peinture rétroréfléchissants (par exemple, ceux sur les panneaux de signalisation routière), ainsi que les feuils de peinture métalliques ne sont pas couverts par le domaine d'application de la présente partie de l'ISO 18314.

Analizna kolorometrija - 1. del: Praktično merjenje barve (ISO 18314-1:2015)

ISO 18314-1:2015 določa metodo za določanje barvnih koordinat barvne plasti. Ta metoda se uporablja samo za barvne plasti, ki se zdijo enotno enobarvne, tj. monokromatske, kadar se preučujejo z običajnim vidom. Barvne plasti, ki neprosojne podlage ne prikrivajo povsem, predstavljajo prosojen sistem in jih je mogoče izmeriti z uporabo postopka v tem delu standarda ISO 18314.
Luminescenčne, prosojne in prozorne barvne plasti (na primer za steklo za zaslone ali sijalke), retroreflekcijske barvne plasti (na primer za prometne znake) ter kovinske barvne plasti so zunaj področja uporabe tega dela standarda ISO 18314.

General Information

Status
Published
Public Enquiry End Date
04-Jan-2018
Publication Date
21-Oct-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Oct-2018
Due Date
14-Dec-2018
Completion Date
22-Oct-2018

Buy Standard

Standard
EN ISO 18314-1:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18314-1:2018
01-november-2018
$QDOL]QDNRORURPHWULMDGHO3UDNWLþQRPHUMHQMHEDUYH ,62
Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015)
Analytische Farbmessung - Teil 1: Praktische Farbmessung (ISO 18314-1:2015)
Analyse colorimétrique - Partie 1: Mesurage pratique de la couleur (ISO 18314-1:2015)
Ta slovenski standard je istoveten z: EN ISO 18314-1:2018
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 18314-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18314-1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 18314-1:2018


EN ISO 18314-1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 87.060.10
English Version

Analytical colorimetry - Part 1: Practical colour
measurement (ISO 18314-1:2015)
Analyse colorimétrique - Partie 1: Mesurage pratique Analytische Farbmessung - Teil 1: Praktische
de la couleur (ISO 18314-1:2015) Farbmessung (ISO 18314-1:2015)
This European Standard was approved by CEN on 19 February 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18314-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18314-1:2018
EN ISO 18314-1:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18314-1:2018
EN ISO 18314-1:2018 (E)
European foreword
The text of ISO 18314-1:2015 has been prepared by Technical Committee 256 "Pigments, dyestuffs and
extenders” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 18314-1:2018 by Technical Committee CEN/TC 298 “Pigments and extenders” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18314-1:2015 has been approved by CEN as EN ISO 18314-1:2018 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 18314-1:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 18314-1:2018
INTERNATIONAL ISO
STANDARD 18314-1
First edition
2015-06-01
Analytical colorimetry —
Part 1:
Practical colour measurement
Analyse colorimétrique —
Partie 1: Mesurage pratique de la couleur
Reference number
ISO 18314-1:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 18314-1:2018
ISO 18314-1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 18314-1:2018
ISO 18314-1:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Sample preparation . 1
4 Sample measurement . 2
4.1 General . 2
4.2 Recommended colourimetric conditions . 2
5 Calibration . 2
5.1 General . 2
5.2 Environmental conditions . 2
5.3 White calibration . 2
5.4 Black calibration . 3
5.5 Control measurement . 3
5.6 Storage of the calibration standards . 3
6 Apparatus . 3
6.1 Spectrophotometer . 3
6.2 Tristimulus colourimeter . 3
7 Selection of appropriate measurement geometry . 3
Bibliography . 5
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 18314-1:2018
ISO 18314-1:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.