SIST EN 60598-2-2:2012

SLOVENSKI STANDARD
SIST EN 60598-2-2:2012
01-maj-2012
Svetilke - 2-2. del: Posebne zahteve - Vgradne svetilke
Luminaires - Part 2-2: Particular requirements - Recessed luminaires
Leuchten - Teil 2-2: Besondere Anforderungen - Einbauleuchten
Luminaires - Partie 2-2: Exigences particulières - Luminaires encastrés
Ta slovenski standard je istoveten z: EN 60598-2-2:2012
ICS:
29.140.40 Svetila Luminaires
SIST EN 60598-2-2:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60598-2-2:2012

---------------------- Page: 2 ----------------------

SIST EN 60598-2-2:2012

EUROPEAN STANDARD
EN 60598-2-2

NORME EUROPÉENNE
February 2012
EUROPÄISCHE NORM

ICS 29.140.50 Supersedes EN 60598-2-2:1996 + A1:1997


English version


Luminaires -
Part 2-2: Particular requirements -
Recessed luminaires
(IEC 60598-2-2:2011)


Luminaires -  Leuchten -
Partie 2-2: Règles particulières - Teil 2-2: Besondere Anforderungen -
Luminaires encastrés Einbauleuchten
(CEI 60598-2-2:2011) (IEC 60598-2-2:2011)





This European Standard was approved by CENELEC on 2011-12-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60598-2-2:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60598-2-2:2012
EN 60598-2-2:2012 - 2 -
Foreword
The text of document 34D/1030/FDIS, future edition 3 of IEC 60598-2-2, prepared by IEC/SC 34D,
"Luminaires", of IEC/TC 34, "Lamps and related equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 60598-2-2:2012.

The following dates are fixed:
(dop) 2012-09-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-12-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60598-2-2:1996 + A1:1997.
The changes introduced by EN 60598-2-2:2012 are those required to maintain consistency with later
versions of EN 60598-1 that have been published since the previous edition of this standard.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60598-2-2:2011 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60598-2-2:2012
- 3 - EN 60598-2-2:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60227 Series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V


IEC 60245 Series Rubber insulated cables - Rated voltages up - -
to and including 450/750 V


IEC 60598-1 - - Luminaires - EN 60598-1 -
Part 1: General requirements and tests

---------------------- Page: 5 ----------------------

SIST EN 60598-2-2:2012

---------------------- Page: 6 ----------------------

SIST EN 60598-2-2:2012
IEC 60598-2-2
®

Edition 3.0 2011-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Luminaires –
Part 2-2: Particular requirements – Recessed luminaires

Luminaires –
Partie 2-2: Règles particulières – Luminaires encastrés

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 29.140.50 ISBN 978-2-88912-772-6

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60598-2-2:2012
– 2 – 60598-2-2 © IEC:2011
CONTENTS
FOREWORD . 3
2.1 Scope . 5
2.2 Normative references . 5
2.3 General test requirements . 5
2.4 Definitions . 5
2.5 Classification of luminaires . 5
2.6 Marking . 5
2.7 Construction . 5
2.8 Creepage distances and clearances . 5
2.9 Provision for earthing . 6
2.10 Terminals . 6
2.11 External and internal wiring . 6
2.12 Protection against electric shock . 6
2.13 Endurance tests and thermal tests . 6
2.14 Resistance to dust and moisture . 7
2.15 Insulation resistance and electric strength . 7
2.16 Resistance to heat, fire and tracking . 7
Annex A (informative) Measurement of ambient temperature in an installation . 8

Table 1 – Operating temperature of cable . 7

---------------------- Page: 8 ----------------------

SIST EN 60598-2-2:2012
60598-2-2 © IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

LUMINAIRES –

Part 2-2: Particular requirements –
Recessed luminaires


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committee
...