Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure

This European Standard specifies a method for determining the ability of high explosives for civil uses to detonate while under applied hydrostatic pressure.
This method is applicable to high explosives in cartridges and as bulk products intended for use under conditions where hydrostatic pressure may adversely affect their safety and reliability. The method is limited to explosives that are able to detonate without confinement at normal atmospheric pressure.

Explosivstoffe für industrielle Zwecke - Sprengstoffe - Teil 6: Bestimmung der Widerstandsfähigkeit gegen hydrostatischen Druck

Diese Europäische Norm legt ein Verfahren zur Feststellung der Fähigkeit von Sprengstoffen für zivile Zwecke fest, unter dem angewandten hydrostatischen Druck zu detonieren.

Explosifs a usage civil - Explosifs brisants - Partie 6: Détermination de la résistance a la pression hydrostatique

La présente Norme européenne spécifie une méthode permettant de déterminer l'aptitude des explosifs destinés a un usage civil a détoner sous une pression hydrostatique appliquée.
La présente méthode est applicable aux explosifs en cartouches et aux produits en vrac destinés a etre utilisés dans des conditions ou une pression hydrostatique est susceptible de nuire a leur sécurité et leur fiabilité. Elle se limite aux explosifs en mesure de détoner sans confinement a la pression atmosphérique normale.

Eksplozivi za civilno uporabo – Razstreliva – 6. del: Ugotavljanje odpornosti proti hidrostatičnemu tlaku

General Information

Status
Published
Publication Date
30-Nov-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2002
Due Date
01-Dec-2002
Completion Date
01-Dec-2002

Relations

Buy Standard

Standard
EN 13631-6:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für industrielle Zwecke - Sprengstoffe - Teil 6: Bestimmung der Widerstandsfähigkeit gegen hydrostatischen DruckExplosifs a usage civil - Explosifs brisants - Partie 6: Détermination de la résistance a la pression hydrostatiqueExplosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13631-6:2002SIST EN 13631-6:2002en01-december-2002SIST EN 13631-6:2002SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-6September 2002ICS 71.100.30English versionExplosives for civil uses - High explosives - Part 6:Determination of resistance to hydrostatic pressureExplosifs à usage civil - Explosifs brisants - Partie 6:Détermination de la résistance à la pression hydrostatiqueExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 6:Bestimmung der Widerstandsfähigkeit gegenhydrostatischen DruckThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-6:2002 E



EN 13631-6:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Apparatus.45Test pieces.66Procedure.67Test report.6Annex A (informative)
Range of applicability of the test method.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.8



EN 13631-6:2002 (E)3ForewordThis document (EN 13631-6:2002) has been prepared by the Technical Committee CEN/TC 321 "Explosives forcivil uses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of the EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a series of standards on Explosives for civil uses– High explosives. The otherparts of this series are:prEN 13631-1Part 1: Requirements.EN 13631-2Part 2: Determination of thermal stability of explosives.prEN 13631-3Part 3: Determination of sensitiveness to friction of explosives.EN 13631-4Part 4: Determination of sensitiveness to impact of explosives.EN 13631-5Part 5: Determination of resistance to water.prEN 13631-7Part 7: Determination of safety and reliability at extreme temperatures.prEN 13631-10Part 10: Method for the verification of the means of initiation.prEN 13631-11Part 11: Method for the determination of transmission of detonation.prEN 13631-12Part 12: Determination of the initiating capability of boosters.prEN 13631-13Part 13: Method for the determination of density.prEN 13631-14Part 14: Method for the determination of velocity of detonation.prEN 13631-15Part 15:Calculation of thermodynamic properties.prEN 13631-16Part 16: Detection and measurement of toxic gases.Annex A is informative.A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.