SIST EN ISO 14272:2016
(Main)Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2016)
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2016)
This International Standard specifies specimen dimensions and a testing procedure for the cross tension
testing of spot and projection welds in overlapping sheets in any metallic material of thickness 0,5 mm
to 3 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm).
The object of cross tension testing is to determine the tensile force that the test specimen can sustain.
Probenmaße und Verfahren für die Kopfzugprüfung an Widerstandspunkt- und Buckelschweißungen mit geprägten Buckeln (ISO 14272:2016)
Diese Internationale Norm legt die Probenmaße und das Verfahren der Kopfzugprüfung an Punkt- und Buckelschweißverbindungen an überlappten Blechen aus beliebigen metallischen Werkstoffen der Blechdicke von 0,5 mm bis 3 mm fest, wobei die Schweißverbindungen einen maximalen Durchmesser von t7haben (t ist die Blechdicke in mm).
Das Ziel der Kopfzugprüfung ist die Bestimmung der Zugkraft, die die Probe ertragen kann.
Dimensions des éprouvettes et mode opératoire pour l'essai de traction sur éprouvettes en croix des soudures par résistance par points et par bossages (ISO 14272:2016)
ISO 14272:2016 spécifie les dimensions des éprouvettes et un mode opératoire pour les essais de traction des soudures par résistance par points et par bossages réalisées sur des tôles soudées par recouvrement, dans tout matériau métallique d'une épaisseur de 0,5 mm à 3 mm, où les soudures ont un diamètre maximal de 7√t (où t est l'épaisseur de la tôle, en millimètres).
L'essai de traction sur des éprouvettes en croix vise à déterminer la charge de rupture qu'une éprouvette peut supporter.
Mere vzorcev in postopek za križno natezno preskušanje uporovnih točkovnih in bradavičnih zvarov (ISO 14272:2016)
Ta mednarodni standard določa mere vzorcev in postopek za križno natezno preskušanje točkovnih in bradavičnih zvarov, v prekrivajočih se slojih, v katerem koli kovinskem materialu debeline 0,5 do 3 mm, pri čemer je največji premer zvarov 7√t (t je debelina sloja v mm).
Cilj križno nateznega preskušanja je določiti natezno silo, ki jo lahko preskusni vzorec prenese.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14272:2016
01-julij-2016
1DGRPHãþD
SIST EN ISO 14272:2002
0HUHY]RUFHYLQSRVWRSHN]DNULåQRQDWH]QRSUHVNXãDQMHXSRURYQLKWRþNRYQLKLQ
EUDGDYLþQLK]YDURY ,62
Specimen dimensions and procedure for cross tension testing resistance spot and
embossed projection welds (ISO 14272:2016)
Probenmaße und Verfahren für die Kopfzugprüfung an Widerstandspunkt- und
Buckelschweißungen mit geprägten Buckeln (ISO 14272:2016)
Dimensions des éprouvettes et mode opératoire pour l'essai de traction sur éprouvettes
en croix des soudures par résistance par points et par bossages (ISO 14272:2016)
Ta slovenski standard je istoveten z: EN ISO 14272:2016
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
SIST EN ISO 14272:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14272:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 14272:2016
EN ISO 14272
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 25.160.40 Supersedes EN ISO 14272:2001
English Version
Resistance welding - Destructive testing of welds -
Specimen dimensions and procedure for cross tension
testing of resistance spot and embossed projection welds
(ISO 14272:2016)
Soudage par résistance - Essais destructifs des Widerstandsschweißen - Zerstörende Prüfung von
soudures - Dimensions des éprouvettes et mode Schweißverbindungen - Probenmaße und Verfahren
opératoire pour l'essai de traction en croix des für die Kopfzugprüfung an Widerstandspunkt- und
soudures par résistance par points et par bossages Buckelschweißungen mit geprägten Buckeln (ISO
(ISO 14272:2016) 14272:2016)
This European Standard was approved by CEN on 5 December 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14272:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14272:2016
EN ISO 14272:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14272:2016
EN ISO 14272:2016 (E)
European foreword
This document (EN ISO 14272:2016) has been prepared by IIW International Institute of Welding in
collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 14272:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14272:2016 has been approved by CEN as EN ISO 14272:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 14272:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 14272:2016
INTERNATIONAL ISO
STANDARD 14272
Second edition
2016-03-01
Resistance welding — Destructive
testing of welds — Specimen
dimensions and procedure for cross
tension testing of resistance spot and
embossed projection welds
Soudage par résistance — Essais destructifs des soudures —
Dimensions des éprouvettes et mode opératoire pour l’essai de
traction en croix des soudures par résistance par points et par
bossages
Reference number
ISO 14272:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 14272:2016
ISO 14272:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 14272:2016
ISO 14272:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test specimen . 1
5 Test equipment and testing procedure . 3
6 Test report . 6
Annex A (informative) Exploded view of a hydraulic clamping device . 8
Bibliography .10
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 14272:2016
ISO 14272:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.