SIST EN 62343-1:2016

SLOVENSKI STANDARD
SIST EN 62343-1:2016
01-oktober-2016
'LQDPLþQLPRGXOLGHO7HKQLþQLVWDQGDUGL6SORãQLSRJRML,(&
Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-
1:2016)
Ta slovenski standard je istoveten z: EN 62343-1:2016
ICS:
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 62343-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62343-1:2016

---------------------- Page: 2 ----------------------

SIST EN 62343-1:2016


EUROPEAN STANDARD EN 62343-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2016
ICS 33.180.01; 33.180.99

English Version
Dynamic modules - Part 1: Performance standards - General
conditions
(IEC 62343-1:2016)
Modules dynamiques - Partie 1 : Normes de performance - Dynamische Module - Teil 1: Betriebsverhaltensnorm -
Conditions générales Allgemeine Bedingungen
(IEC 62343-1:2016) (IEC 62343-1:2016)
This European Standard was approved by CENELEC on 2016-03-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62343-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62343-1:2016
EN 62343-1:2016
European foreword
The text of document 86C/1312/CDV, future edition 1 of IEC 62343-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 62343-1:2016.
The following dates are fixed:
(dop) 2017-01-15
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2019-07-15
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62343-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 62343 NOTE Harmonized as EN 62343.
IEC 62343-1 (series) NOTE Harmonized as EN 62343-1 (series).
IEC 62343-2 NOTE Harmonized as EN 62343-2.

2

---------------------- Page: 4 ----------------------

SIST EN 62343-1:2016
EN 62343-1:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
ITU-T G.694-1 -  Spectral grids for WDM applications: - -
DWDM frequency grid

3

---------------------- Page: 5 ----------------------

SIST EN 62343-1:2016

---------------------- Page: 6 ----------------------

SIST EN 62343-1:2016



IEC 62343-1

®


Edition 1.0 2016-02




INTERNATIONAL



STANDARD




















Dynamic modules –

Part 1: Performance standards – General conditions


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.01; 33.180.99 ISBN 978-2-8322-3184-5



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62343-1:2016
– 2 – IEC 62343-1:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Requirements of operating conditions . 6
4 Requirements of operating wavelength range (spectral band) . 7
Annex A (informative) Recommendations for other conditions on product
specifications . 8
A.1 Storage environmental conditions . 8
A.2 Absolute maximum ratings . 8
Bibliography . 9

Table 1 – Operating conditions . 7
Table 2 – Spectral bands . 7
Table A.1 – Storage environmental conditions (typical) . 8
Table A.2 – Absolute maximum rating items (minimum list) . 8

---------------------- Page: 8 ----------------------

SIST EN 62343-1:2016
IEC 62343-1:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DYNAMIC MODULES –

Part 1: Performance standards – General conditions

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accep
...