Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983)

Gives instructions for correct executiion and harmonizes the dimensioning of the symbols with the lettering. Refers to ISO 1101, ISO 3098/1, and ISO 5459. The symbols and their lettering may be hand-written (using a rule for drawing the frames) or executed by means of other appropriate methods (for example stencils, transfers, mechanical drawing, etc.).

Technische Zeichnungen - Symbole für Form-und Lagetolerierung - Verhältnisse und Maße (ISO 7083:1983)

Diese Internationale Norm legt empfohlene Größenverhältnisse und die Maße von graphischen Symbolen fest, die für die Eintragung von Form- und Lagetoleranzen in technischen Zeichnungen angewendet werden. Die graphischen Symbole und deren Beschriftung dürfen sowohl handschriftlich (unter Anwendung eines Lineals zum Zeichnen des Rahmens) als auch mit anderen zweckmäßigen Zeichenmethoden (z. B. unter Anwendung von Schablonen, Übertragungssystemen, Plottern) ausgeführt werden. Die Maße der graphischen Symbole sind auf die in ISO 3098 Teil 1 festgelegten Schriftgrößen bezogen.

Dessins techniques - Symboles pour tolérancement géométrique - Proportions et dimensions (ISO 7083:1983)

La présente Norme internationale spécifie les proportions et fixe les dimensions recommandées des symboles utilisés pour l'indication du tolérancement géométrique sur les dessins techniques. Les symboles et leur écriture peuvent être écrits à main levée (en traçant les cadres à la règle) ou être exécutés en utilisant d'autres méthodes appropriées (par exemple, trace-lettres, procédés transferts, dessin mécanique, etc.). Les dimensions des symboles sont basées sur les hauteurs d'écriture données dans l'ISO 3098/1.

Tehniške risbe - Simboli za označevanje geometričnih toleranc - Sorazmerja in mere (ISO 7083:1983)

General Information

Status
Withdrawn
Publication Date
30-Jun-2001
Withdrawal Date
27-Jun-2021
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-Jun-2021
Due Date
15-Jul-2021
Completion Date
28-Jun-2021

Relations

Buy Standard

Standard
EN ISO 7083:1998
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7083:
01-PDj-
7HKQLãNHULVEH6LPEROL]DR]QDþHYDQMHJHRPHWULþQLKWROHUDQF6RUD]PHUMDLQ
PHUH ,62
Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
(ISO 7083:1983)
Technische Zeichnungen - Symbole für Form-und Lagetolerierung - Verhältnisse und
Maße (ISO 7083:1983)
Dessins techniques - Symboles pour tolérancement géométrique - Proportions et
dimensions (ISO 7083:1983)
Ta slovenski standard je istoveten z: EN ISO 7083:1994
ICS:
01.100.01 7HKQLþQRULVDQMHQDVSORãQR Technical drawings in
general
SIST EN ISO 7083:HQ
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

������������
������� ������� �� ��������������� ������� ���������������� �������� ���������
����� ����� � ���� ��������
������ � ������ �� ������
����� ���������� ������ � ������ ��������
���� ������ �
��������� ������
����� �� ����� � �������
�� ���������� ����� ����� �� ����� ��
������ ����������� ��������� ��������������������
������������

---------------------- Page: 2 ----------------------

�����
�������������������������������������� ��������
��������������������� �������������������������
����� ������������ �� ����������� ������� ���
������������������ ����������� ���������������
������������������������ ����������������������
����������� ����������������������������
��������������� ���� ��������������� ����������
������ �������������������������������������� ��
���������
������������������� ����� ������������ ���� ��
�������������� �������������� ����������� ���
�������������������� �������������������
���� ��� ����
���� ���� ����
�������� ��� ��� ���������
���� ���
���
���� ������� ������� ����
����
������ ������
����� ���� �� ���� ���
������ ��������������������������������������
����������� �
����
��������
��
� �������������� ����������� ���
������������

---------------------- Page: 3 ----------------------

������� ����� �� ����� ��
����� ����� � ���� ��������
������ � ������ �� ������
� ������� ��������������� � ������ ������ �
���� �� ������� �������� ������
�� ���� �����������������������������
������������������������ ��������
������ �� ����� ����� ��� ����� ��
� ���� ������
��������������� ��������� ��������
����������������������������������
�� �� ����������������� �����������
������������
������������������������
�� ���������� ������������� ������
������������������������������� ��
� ��� �� �����������
����������������������� ���������
���������������������������� ���� �������������
����������� ���������������� �������
����������������������������
� ������
������ ������������ ��������������
����������������������� ����������
��������� ������������������ �������
��������� ������������������������� ������������������������������ �������
���������� ����
�� ������ �������� �������������� ����������������������������������
�����������������������������������
����������������������
������������������������������������
����������������������
����������������������������
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.