SIST EN 61968-4:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integration von Anwendungen in Anlagen der Elektrizitätsversorgung - Systemschnittstellen für Netzführung - Teil 4: Schnittstellen für Berichtswesen und Asset ManagementIntégration d'applications pour les services électriques - Système d'interfaces pour la gestion de la distribution - Partie 4: Interfaces pour les enregistrements et la gestion du parcApplication integration at electric utilities - System interfaces for distribution management -- Part 4: Interfaces for records and asset management35.200Vmesniška in povezovalna opremaInterface and interconnection equipment29.240.30Krmilna oprema za elektroenergetske sistemeControl equipment for electric power systemsICS:Ta slovenski standard je istoveten z:EN 61968-4:2007SIST EN 61968-4:2007en,de01-december-2007SIST EN 61968-4:2007SLOVENSKI
STANDARD



SIST EN 61968-4:2007



EUROPEAN STANDARD EN 61968-4 NORME EUROPÉENNE
EUROPÄISCHE NORM August 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61968-4:2007 E
ICS 33.200
English version
Application integration at electric utilities -
System interfaces for distribution management -
Part 4: Interfaces for records and asset management (IEC 61968-4:2007)
Intégration d'applications
pour les services électriques -
Système d'interfaces
pour la gestion de la distribution -
Partie 4: Interfaces
pour les enregistrements
et la gestion du parc (CEI 61968-4:2007)
Integration von Anwendungen
in Anlagen der Elektrizitätsversorgung -
Systemschnittstellen für Netzführung -
Teil 4: Schnittstellen für Berichtswesen und Asset Management (IEC 61968-4:2007)
This European Standard was approved by CENELEC on 2007-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61968-4:2007



EN 61968-4:2007
- 2 - Foreword The text of document 57/880/FDIS, future edition 1 of IEC 61968-4, prepared by IEC TC 57, Power systems management and associated information exchange, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61968-4 on 2007-08-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-08-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61968-4:2007 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 61968-4:2007



- 3 - EN 61968-4:2007
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 61968-1 - 1) Application integration at electric utilities - System interfaces for distribution management -
Part 1: Interface architecture and general requirements EN 61968-1 2004 2)
IEC 61968-3 - 1) Application integration at electric utilities - System interfaces for distribution management -
Part 3: Interface for network operations EN 61968-3 2004 2)
1) Undated reference.
2) Valid edition at date of issue.
SIST EN 61968-4:2007



SIST EN 61968-4:2007



INTERNATIONAL STANDARD IEC61968-4 First edition2007-07 Application integration at electric utilities – System interfaces for distribution management – Part 4: Interfaces for records and asset management XA For price, see current cataloguePRICE CODE
Commission Electrotechnique InternationaleInternational Electrotechnical CommissionSIST EN 61968-4:2007



– 2 – 61968-4 © IEC:2007(E) CONTENTS FOREWORD.3 INTRODUCTION.5
1 Scope.6 2 Normative references.6 3 Reference and information models.6 3.1 General.6 3.2 Interface reference model.6 3.3 Records and asset management functions and components.6 3.4 Static information model.7 4 Records and Asset message types.7 4.1 Summary.7 4.2 Network Data Set message type.7 4.2.1 Message content.7 4.2.2 Message format.7 4.3 Change Set message type.24 4.3.1 Message content.24 4.3.2 Message format.24 4.4 Presentation message type.24 4.4.1 Message content.24 4.4.2 Message format.24 4.5 Asset List message type.29 4.5.1 Message content.29 4.5.2 Message format.29 4.6 Asset Catalogue message type.36 4.6.1 Message content.36 4.6.2 Message format.36 4.7 Type Asset Catalogue message type.42 4.7.1 Message content.42 4.7.2 Message format.42
Annex A (informative) Use of the Geography Markup Language (GML).51
Figure 1 – Network Data Set message format.8 Figure 2 – Change Set message format.24 Figure 3 – Presentations message format.25 Figure 4 – Asset List message format.30 Figure 5 – Asset Catalogue message format.37 Figure 6 – Type Asset Catalogue message format.43
Table 1 – Document overview for IEC 61968-4.5
SIST EN 61968-4:2007



61968-4 © IEC:2007(E) – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ______________
APPLICATION INTEGRATION AT ELECTRIC UTILITIES –
SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT –
Part 4: Interfaces for records and asset management
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61968 has been prepared by IEC technical committee 57: Power systems management and associated information exchange. The text of this standard is based on the following documents: FDIS Report on voting 57/880/FDIS 57/901/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. SIST EN 61968-4:2007



– 4 – 61968-4 © IEC:2007(E) A list of all parts of the IEC 61968 series, under the general title Application integration at electric utilities – System interfaces for distribution management, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed; • withdrawn; • replaced by a revised edition, or • amended. A bilingual version of this publication may be issued at a later date.
SIST EN 61968-4:2007



61968-4 © IEC:2007(E) – 5 – INTRODUCTION The IEC 61968 series of standards is intended to facilitate inter-application integration as opposed to intra-application integration. Intra-application integration is aimed at programs in the same application system, usually communicating with each other using middleware that is embedded in their underlying runtime environment, and tends to be optimized for close, real-time, synchronous connections and interactive request/reply or conversation communication models. IEC 61968, by contrast, is intended to support the inter-application integration of a utility enterprise that needs to connect disparate applications that are already built or new (legacy or purchased applications), each supported by dissimilar runtime environments. Therefore, these interface standards are relevant to loosely coupled applications with more heterogeneity in languages, operating systems, protocols and management tools. This series of standards is intended to support applications that need to exchange data every few seconds, minutes, or hours rather than waiting for a nightly batch run. This series of standards, which are intended to be implemented with middleware services that exchange messages among applications, will complement, not replace utility data warehouses, database gateways, and operational stores. As used in
the IEC 61968 series, a DMS consists of various distributed application components for the utility to manage electrical distribution networks. These capabilities include monitoring and control of equipment for power delivery, management processes to ensure system reliability, voltage management, demand-side management, outage management, work management, automated mapping and facilities management. Standards interfaces are defined for each class of applications identified in the Interface Reference Model (IRM), which is described in IEC 61968-1. This Part of IEC 61968 contains the Clauses shown in Table 1. Table 1 – Document overview for IEC 61968-4 Clause Title Purpose 1 Scope The scope and purpose of the document are described.
2 Normative references Documents that contain provisions which, through reference in this text, constitute provisions of this International Standard. 3 Reference and information models Description of the relevant parts of the interface reference model, static information model and message type naming convention. 4 Records and asset management message types Message types related to the exchange of information for network data sets, assets, and asset catalogues.
SIST EN 61968-4:2007



– 6 – 61968-4 © IEC:2007(E) APPLICATION IN
...