Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load (ISO 15927-2:2009)

This part of ISO 15927 gives the definition and specifies methods of calculation and presentation of the monthly external design climate to be used in termining the design cooling load of buildings and the design of air conditioning systems. Depending on the building type, a range of parameters can be used to define the individual days of hourly or three-hourly data in each calendar month that impose a cooling load likely to be exceeded on 5 %, 2 % and 1 % of days. The parameters that are always used in the selection are dry-bulb temperature and total global solar irradiation (or sunshine hours). The daily swing in dry-bulb temperature, dewpoint temperature and wind speed and any other parameters relevant to particular buildings may also be included. Hourly peak values of dry-bulb temperature and dewpoint temperature are needed for the design of air conditioning systems.

Wärme- und feuchteschutztechnisches Verhalten von Gebäuden - Berechnung und Darstellung von Klimadaten - Teil 2: Stundendaten zur Bestimmung der Kühllast (ISO 15927-2:2009)

Dieses Dokument legt die BegriffeDefinitionen und das Berechnungsverfahren sowie Darstellungshinweise von monatlichen externen Klimadaten fest, die zur Bestimmung der Kühllast in Gebäuden und zur Bestimmung von Lüftungssystemen verwendet werden müssen.
In Abhängigkeit des Gebäudes können eine Reihe von Parameter angewendet werden, um die einzelnen Tage in monatlichen Stunden- oder Dreistunden-Daten festzulegen, die an voraussichtlich 5 %, 2 % und 1 % der Tage höhere Kühllast ausweisen.
Die Trockentemperatur und die globale gesamte Sonneneinstrahlung (oder Sonnenstunden) müssen immer als Parameter ausgewählt sein. Die tägliche Schwankung in der Trockentemperatur, die Taupunkttemperatur, die Windgeschwindigkeit und andere gebäudespezifische Parameter können ebenfalls enthalten sein.
Stündliche Höchstwerte der Trocken- und Taupunkttemperatur werden für die Bewertung von Lüftkühlungssysteme gebraucht.

Performance hygrothermique des bâtiments - Calcul et présentation des données climatiques - Partie 2: Données horaires pour la charge de refroidissement de conception (ISO 15927-2:2009)

L'ISO 15927-2:2009 donne la définition et spécifie les méthodes de calcul et de présentation du climat mensuel extérieur type nécessaire à la détermination de la charge nominale de refroidissement et au dimensionnement des systèmes d'air conditionné.

Higrotermalne značilnosti stavb - Izračun in predstavitev podnebnih podatkov - 2. del: Urni podatki za določanje hladilnih obremenitev (ISO 15927-2:2009)

General Information

Status
Published
Public Enquiry End Date
30-Aug-2007
Publication Date
07-May-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Mar-2009
Due Date
01-Jun-2009
Completion Date
08-May-2009

Buy Standard

Standard
EN ISO 15927-2:2009
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 15927-2:2009
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 15927-2:2007
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15927-2:2009
01-junij-2009
Higrotermalne značilnosti stavb - Izračun in predstavitev podnebnih podatkov - 2.
del: Urni podatki za določanje hladilnih obremenitev (ISO 15927-2:2009)
Hygrothermal performance of buildings - Calculation and presentation of climatic data -
Part 2: Hourly data for design cooling load (ISO 15927-2:2009)
Wärme- und feuchteschutztechnisches Verhalten von Gebäuden - Berechnung und
Darstellung von Klimadaten - Teil 2: Stundendaten zur Bestimmung der Kühllast (ISO
15927-2:2009)
Performance hygrothermique des bâtiments - Calcul et présentation des données
climatiques - Partie 2: Données horaires pour la charge de refroidissement de
conception (ISO 15927-2:2009)
Ta slovenski standard je istoveten z: EN ISO 15927-2:2009
ICS:
07.060 Geologija. Meteorologija. Geology. Meteorology.
Hidrologija Hydrology
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 15927-2:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15927-2:2009

---------------------- Page: 2 ----------------------
SIST EN ISO 15927-2:2009
EUROPEAN STANDARD
EN ISO 15927-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 07.060; 91.120.10
English Version
Hygrothermal performance of buildings - Calculation and
presentation of climatic data - Part 2: Hourly data for design
cooling load (ISO 15927-2:2009)
Performance hygrothermique des bâtiments - Calcul et Wärme- und feuchteschutztechnisches Verhalten von
présentation des données climatiques - Partie 2: Données Gebäuden - Berechnung und Darstellung von Klimadaten -
horaires pour la charge de refroidissement de conception Teil 2: Stundendaten zur Bestimmung der Kühllast (ISO
(ISO 15927-2:2009) 15927-2:2009)
This European Standard was approved by CEN on 17 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15927-2:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15927-2:2009
EN ISO 15927-2:2009 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------
SIST EN ISO 15927-2:2009
EN ISO 15927-2:2009 (E)
Foreword
This document (EN ISO 15927-2:2009) has been prepared by Technical Committee CEN/TC 89 “Thermal
performance of buildings and building components", the secretariat of which is held by SIS, in collaboration
with Technical Committee ISO/TC 163 "Thermal performance and energy use in the built environment".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest by August 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN ISO 15927-2:2009

---------------------- Page: 6 ----------------------
SIST EN ISO 15927-2:2009

INTERNATIONAL ISO
STANDARD 15927-2
First edition
2009-02-15


Hygrothermal performance of
buildings — Calculation and presentation
of climatic data —
Part 2:
Hourly data for design cooling load
Performance hygrothermique des bâtiments — Calcul et présentation
des données climatiques —
Partie 2: Données horaires pour la charge de refroidissement de
conception





Reference number
ISO 15927-2:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------
SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms, definitions, symbols and units.2
3.1 Terms and definitions .2
3.2 Symbols and units.3
4 Method of determination.3
4.1 Sources of data.3
4.2 Identification of the design days .3
5 Data for the design of air conditioning systems.5
6 Presentation of the design days .6
7 Presentation of the data for the design of air conditioning systems .6
Annex A (informative) Example of the procedure for identifying a design day .7

© ISO 2009 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15927-2 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 89, Thermal performance of buildings and building components, in collaboration with Technical
Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2,
Calculation methods, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
ISO 15927 consists of the following parts, under the general title Hygrothermal performance of buildings —
Calculation and presentation of climatic data:
⎯ Part 1: Monthly means of single meteorological elements
⎯ Part 2: Hourly data for design cooling load
⎯ Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
⎯ Part 4: Hourly data for assessing the annual energy use for heating and cooling
⎯ Part 5: Data for design heat load for space heating
⎯ Part 6: Accumulated temperature differences (degree-days)
iv © ISO 2009 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
Introduction
The choice of design load for space cooling is a matter of balancing user needs against cost. On the one hand,
users expect a cooling system to maintain the internal temperatures needed for health and comfort; on the
other hand, very high cooling loads can arise from extreme meteorological conditions. It is usually uneconomic
to design cooling systems for rare extremes, as this leads to high capital cost and, usually, to lower
operational efficiency of the system. The highest cooling loads occur with a combination of high daily mean
dry-bulb temperature and dewpoint temperature, high daily total irradiation, low daily swing in temperature and
low wind speed. Data are therefore needed on the values of these parameters when they occur in
combination at specific return periods.

© ISO 2009 – All rights reserved v

---------------------- Page: 11 ----------------------
SIST EN ISO 15927-2:2009

---------------------- Page: 12 ----------------------
SIST EN ISO 15927-2:2009
INTERNATIONAL STANDARD ISO 15927-2:2009(E)

Hygrothermal performance of buildings — Calculation and
presentation of climatic data —
Part 2:
Hourly data for design cooling load
1 Scope
This part of ISO 15927 gives the definition and specifies methods of calculation and presentation of the
monthly external design climate to be used in determining the design cooling load of buildings and the design
of air conditioning systems.
Depending on the building type, a range of parameters can be used to define the individual days of hourly or
three-hourly data in each calendar month that impose a cooling load likely to be exceed
...

SLOVENSKI STANDARD
SIST EN ISO 15927-2:2009
01-junij-2009
+LJURWHUPDOQHNDUDNWHULVWLNHVWDYE5DþXQDQMHLQSUHGVWDYLWHYNOLPDWVNLK
SRGDWNRYGHO8UQLSRGDWNL]DGRORþDQMHKODGLOQLKREUHPHQLWHY ,62

Hygrothermal performance of buildings - Calculation and presentation of climatic data -
Part 2: Hourly data for design cooling load (ISO 15927-2:2009)
Wärme- und feuchteschutztechnisches Verhalten von Gebäuden - Berechnung und
Darstellung von Klimadaten - Teil 2: Stundendaten zur Bestimmung der Kühllast (ISO
15927-2:2009)
Performance hygrothermique des bâtiments - Calcul et présentation des données
climatiques - Partie 2: Données horaires pour la charge de refroidissement de
conception (ISO 15927-2:2009)
Ta slovenski standard je istoveten z: EN ISO 15927-2:2009
ICS:
07.060 Geologija. Meteorologija. Geology. Meteorology.
Hidrologija Hydrology
91.120.10 Toplotna izolacija stavb Thermal insulation
SIST EN ISO 15927-2:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15927-2:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 15927-2:2009
EUROPEAN STANDARD
EN ISO 15927-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 07.060; 91.120.10
English Version
Hygrothermal performance of buildings - Calculation and
presentation of climatic data - Part 2: Hourly data for design
cooling load (ISO 15927-2:2009)
Performance hygrothermique des bâtiments - Calcul et Wärme- und feuchteschutztechnisches Verhalten von
présentation des données climatiques - Partie 2: Données Gebäuden - Berechnung und Darstellung von Klimadaten -
horaires pour la charge de refroidissement de conception Teil 2: Stundendaten zur Bestimmung der Kühllast (ISO
(ISO 15927-2:2009) 15927-2:2009)
This European Standard was approved by CEN on 17 January 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15927-2:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15927-2:2009
EN ISO 15927-2:2009 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 15927-2:2009
EN ISO 15927-2:2009 (E)
Foreword
This document (EN ISO 15927-2:2009) has been prepared by Technical Committee CEN/TC 89 “Thermal
performance of buildings and building components", the secretariat of which is held by SIS, in collaboration
with Technical Committee ISO/TC 163 "Thermal performance and energy use in the built environment".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest by August 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 15927-2:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 15927-2:2009

INTERNATIONAL ISO
STANDARD 15927-2
First edition
2009-02-15


Hygrothermal performance of
buildings — Calculation and presentation
of climatic data —
Part 2:
Hourly data for design cooling load
Performance hygrothermique des bâtiments — Calcul et présentation
des données climatiques —
Partie 2: Données horaires pour la charge de refroidissement de
conception





Reference number
ISO 15927-2:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms, definitions, symbols and units.2
3.1 Terms and definitions .2
3.2 Symbols and units.3
4 Method of determination.3
4.1 Sources of data.3
4.2 Identification of the design days .3
5 Data for the design of air conditioning systems.5
6 Presentation of the design days .6
7 Presentation of the data for the design of air conditioning systems .6
Annex A (informative) Example of the procedure for identifying a design day .7

© ISO 2009 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15927-2 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 89, Thermal performance of buildings and building components, in collaboration with Technical
Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2,
Calculation methods, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
ISO 15927 consists of the following parts, under the general title Hygrothermal performance of buildings —
Calculation and presentation of climatic data:
⎯ Part 1: Monthly means of single meteorological elements
⎯ Part 2: Hourly data for design cooling load
⎯ Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
⎯ Part 4: Hourly data for assessing the annual energy use for heating and cooling
⎯ Part 5: Data for design heat load for space heating
⎯ Part 6: Accumulated temperature differences (degree-days)
iv © ISO 2009 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 15927-2:2009
ISO 15927-2:2009(E)
Introduction
The choice of design load for space cooling is a matter of balancing user needs against cost. On the one hand,
users expect a cooling system to maintain the internal temperatures needed for health and comfort; on the
other hand, very high cooling loads can arise from extreme meteorological conditions. It is usually uneconomic
to design cooling systems for rare extremes, as this leads to high capital cost and, usually, to lower
operational efficiency of the system. The highest cooling loads occur with a combination of high daily mean
dry-bulb temperature and dewpoint temperature, high daily total irradiation, low daily swing in temperature and
low wind speed. Data are therefore needed on the values of these parameters when they occur in
combination at specific return periods.

© ISO 2009 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 15927-2:2009

---------------------- Page: 12 ----------------------

SIST EN ISO 15927-2:2009
INTERNATIONAL STANDARD ISO 15927-2:2009(E)

Hygrothermal performance of buildings — Calculation and
presentation of climatic data —
Part 2:
Hourly data for design cooling load
1 Scope
This part of ISO 15927 gives the definition and specifies methods of calculation and presentation of the
monthly external design climate to be used in determining the design cooling load of buildings and the design
of air conditioning systems.
Depending on the building type, a range of parameters can be used to define the individual days of hourly or
three-hourly data in each calendar month that impose a cooling load likely to be exceed
...

SLOVENSKI STANDARD
oSIST prEN ISO 15927-2:2007
01-julij-2007
+LJURWHUPDOQHNDUDNWHULVWLNHVWDYE5DþXQDQMHLQSUHGVWDYLWHYNOLPDWVNLK
SRGDWNRYGHO8UQLSRGDWNL]DQDþUWRYDQMHREUHPHQLWYHRKODMHYDQMD ,62',6

Hygrothermal performance of buildings - Calculation and presentation of climatic data -
Part 2: Hourly data for design cooling load (ISO/DIS 15927-2:2007)
Wärme- und feuchteschutztechnisches Verhalten von Gebäuden - Berechnung und
Darstellung von Klimadaten - Teil 2: Stundendaten zur Bestimmung der Kühllast
(ISO/DIS 15927-2:2007)
Performance hygrothermique des bâtiments - Calcul et présentation des données
climatiques - Partie 2: Données horaires pour la charge de refroidissement de
conception (ISO/DIS 15927-2:2007)
Ta slovenski standard je istoveten z: prEN ISO 15927-2
ICS:
07.060 Geologija. Meteorologija. Geology. Meteorology.
Hidrologija Hydrology
91.120.10 Toplotna izolacija stavb Thermal insulation
oSIST prEN ISO 15927-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 15927-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2007
ICS 91.120.01

English Version
Hygrothermal performance of buildings - Calculation and
presentation of climatic data - Part 2: Hourly data for design
cooling load (ISO/DIS 15927-2:2007)
Performance hygrothermique des bâtiments - Calcul et
présentation des données climatiques - Partie 2: Données
horaires pour la charge de refroidissement de conception
(ISO/DIS 15927-2:2007)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 89.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 15927-2:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 15927-2:2007 (E)




Foreword

This document (prEN ISO 15927-2:2007) has been prepared by Technical Committee
CEN/TC 89 "Thermal performance of buildings and building components", the secretariat of
which is held by SIS, in collaboration with Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment".

This document is currently submitted to the parallel Enquiry.


2

---------------------- Page: 3 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 15927-2
ISO/TC 163/SC 2 Secretariat: SN
Voting begins on: Voting terminates on:
2007-05-03 2007-10-03
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Hygrothermal performance of buildings — Calculation and
presentation of climatic data —
Part 2:
Hourly data for design cooling load
Performance hygrothermique des bâtiments — Calcul et présentation des données climatiques —
Partie 2: Données horaires pour la charge de refroidissement de conception
ICS 07.060; 91.120.10

ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2007

---------------------- Page: 4 ----------------------
ISO/DIS 15927-2
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2007 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/DIS 15927-2
Contents Page
Foreword .iv
Introduction.iv
1 Scope.1
2 Normative references.1
3 Terms, definitions, symbol and units.1
3.1 Terms and definitions .1
3.2 Symbols and units.2
4 Method of determination.2
4.1 Sources of data.2
4.2 Identification of the design days .3
5 Data for the design of HVAC systems.4
6 Presentation of the design days .5
7 Presentation of the data for the design of HVAC systems .5
Annex A (informative) Example of the procedure for identifying a design day .6

© ISO 2007 – All rights reserved iii

---------------------- Page: 6 ----------------------
ISO/DIS 15927-2
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15927- 2 was prepared by Technical Committee CEN/TC 89, Thermal performance of buildings and
building components, in cooperation with Technical Committee ISO/TC 163, Thermal performance and energy
use in the built environment, Subcommittee SC 2, Calculation methods.
ISO 15927 consists of the following parts, under the general title Hygrothermal performance of buildings —
Calculation and presentation of climatic data:
⎯ Part 1: Monthly means of single meteorological elements;
⎯ Part 2: Hourly data for design cooling load;
⎯ Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data;
⎯ Part 4: Hourly data for assessing the annual energy use for heating and cooling;
⎯ Part 5: Data for design heat load for space heating;
⎯ Part 6: Accumulated temperature differences (degree days).
Introduction
The choice of design load for space cooling is a matter of balancing user needs against cost. On the one hand,
users expect a cooling system to maintain the internal temperatures needed for health and comfort; on the
other hand very high cooling loads can arise from extreme meteorological conditions. It is usually uneconomic
to design cooling systems for rare extremes, as this leads to high capital cost and, usually, to lower
operational efficiency of the system. The highest cooling loads occur with a combination of high daily mean
dry bulb temperature and dewpoint temperature, high daily
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.