SIST EN 60706-5:2008

Oznaka standarda: SIST EN 60706-5:2008
Koda projekta: 17114
Organizacija: SIST
Naslov (angleški): Maintainability of equipment -- Part 5: Testability and diagnostic testing
Naslov (slovenski): Vzdrževalnost opreme - 5. del: Preskusnost in diagnostično preskušanje (IEC 60706-5:2007)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 60706-5:2008 angleški jezik Active SIST-K: 101.64 EUR
PDF
Papir
Tehnični odbor: IEZS - Zagotovljivost
ICS: 03.100.40 21.020
Status: Objavljen
Objavljen: 01-jan-2008
Refer. št. objave: Sporočila 2008-01
Referenčna oznaka: EN 60706-5:2007
Področje projekta (angleško): The purpose of this part of IEC 60706 is to - provide guidance for the early consideration of testability aspects in design and development; - assist in determining effective test procedures as an integral part of operation and maintenance. This International Standard can be applied to all types of products which may include commercial off-the-shelf (COTS) items. In this respect, it does not matter whether the product belongs to mechanical, hydraulic, electrical or some other technology. In addition, this International Standard applies to the development of any products, with the aim of designing the product characteristics so that they are verifiable (testable). The objective of this International standard is to ensure that prerequisites relating to the testability of products are defined in the preliminary phases of development, laid down by the customer, implemented, documented and verified during development. This International Standard also provides methods to implement and assess testability as an integral part of the product design. It recommends that the product testability documentation should be continually updated over the product's life cycle.

Najbolje prodajani standardi