Aerospace series - Rings retaining, internal, axial mounting, steel, vacuum cadmium plated

This European Standard defines the characteristics of axial mounting internal retaining rings, in steel, vacuum cadmium plated, for aerospace applications.
The cadmium plating restricts the use at temperatures not exceeding 235 °C.

Luft- und Raumfahrt - Sicherungsringe, axial in Bohrungen montierbar, aus Stahl, vakuumverkadmet

Diese Norm legt die Merkmale von axial in Bohrungen montierbaren Sicherungsringen aus Stahl, im Vakuum
verkadmet, zur Anwendung in der Luft- und Raumfahrt fest.
Die Verkadmung beschränkt die Verwendung auf Temperaturen von nicht mehr als 235 °C.

Série aérospatiale - Anneaux d’arrêt, à montage axial, type intérieur, en acier, cadmiés sous vide

La présente Norme Européenne définit les caractéristiques des anneaux d’arrêt, à montage axial, type intérieur, en acier, cadmiés sous vide, pour applications aérospatiales.
Le cadmiage sous vide limite l’utilisation à des températures ne dépassant pas 235 °C.

Aeronavtika - Varnostni obroči za osno pritrditev v okrogle odprtine, jekleni, vakuumsko kadmirani

Ta standard določa lastnosti jeklenih vakuumsko kadmiranih varnostnih obročev za osno pritrditev v okrogle odprtine za uporabo v aeronavtiki. Kadmiranje omejuje uporabo na temperature, ki ne presegajo 235 °C.

General Information

Status
Published
Publication Date
27-Mar-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Mar-2012
Due Date
28-May-2012
Completion Date
28-Mar-2012

Buy Standard

Standard
EN 3383:2012
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Sicherungsringe, axial in Bohrungen montierbar, aus Stahl, vakuumverkadmetSérie aérospatiale - Anneaux d’arrêt, à montage axial, type intérieur, en acier, cadmiés sous videAerospace series - Rings retaining, internal, axial mounting, steel, vacuum cadmium plated49.030.50Podložke in drugi blokirni elementiWashers and other locking elementsICS:Ta slovenski standard je istoveten z:EN 3383:2012SIST EN 3383:2012en01-maj-2012SIST EN 3383:2012SLOVENSKI
STANDARD



SIST EN 3383:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3383
March 2012 ICS 49.030.50 English Version
Aerospace series - Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
Série aérospatiale - Anneaux d'arrêt, à montage axial, type intérieur, en acier, cadmiés sous vide
Luft- und Raumfahrt - Sicherungsringe, axial in Bohrungen montierbar, aus Stahl, vakuumverkadmet This European Standard was approved by CEN on 24 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3383:2012: ESIST EN 3383:2012



EN 3383:2012 (E) 2 Contents Page Foreword .31 Scope and field of application .42 Normative references .43 Required characteristics .43.1 Configuration — Dimensions — Masses .43.2 Materials .43.3 Surface treatment .44 Designation .85 Marking .86 Technical specification .87 Mounting .8 SIST EN 3383:2012



EN 3383:2012 (E) 3 Foreword This document (EN 3383:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3383:2012



EN 3383:2012 (E) 4 1 Scope and field of application This standard defines the characteristics of axial mounting internal retaining rings, in steel, vacuum cadmium plate
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.