Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements for tables

This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and contract use without regard to materials, design/construction or manufacturing processes. This standard excludes tables using glass in their construction. This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall. Annex A (informative) specifies guidelines for purchase information. Information regarding ageing and degradation caused by light, temperature and moisture has not been included.

Außenmöbel - Sitzmöbel und Tische für den Camping-, Wohn- und Objektbereich - Teil 3: Mechanische Sicherheitsanforderungen für Tische

Diese Europäische Norm legt die Mindestanforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit für alle Arten von Außentischen für Erwachsene, unabhängig von Werkstoffen, Design/Konstruktion oder Herstellungsprozessen, fest.
Sie gilt nicht für öffentlich aufgestellte Straßenmöbel.
Die Norm enthält mit Ausnahme der Prüfungen der Standsicherheit keine Beurteilung der Eignung der in Tischen enthaltenen Aufbewahrungsmöglichkeiten.
Sie enthält keine Anforderungen an die Dauerhaltbarkeit von Rollen/Rädern und an  Mechanismen zur Höhenverstellung.
Sie enthält keine Anforderungen an die elektrische Sicherheit.
Sie enthält keine Anforderungen an die Alterungsbeständigkeit und an durch Licht, Temperatur und Feuchtigkeit verursachte Qualitätsminderungen.

Mobilier d’extérieur - Sièges et tables à usages domestique, collectif et de camping - Partie 3 : Exigences mécaniques de sécurité pour les tables

La présente Norme européenne spécifie les exigences minimales en matière de sécurité, de résistance et de durabilité de tous les types de tables d’extérieur pour adultes, indépendamment de la nature des matériaux, de la conception/construction ou des procédés de fabrication.
Elle ne s’applique pas au mobilier urbain.
À l’exception des essais de stabilité, la présente norme ne fournit aucune évaluation sur l’aptitude à l’usage des éléments de rangement inclus dans les tables.
Elle n’inclut aucune exigence relative à la durabilité des roues/roulettes et des mécanismes de réglage de la hauteur.
Elle n’inclut aucune exigence relative à la sécurité électrique.
Elle n’inclut aucune exigence relative à la résistance au vieillissement et aux détériorations dues à la lumière, à la température et à l’humidité.

Zunanje pohištvo - Sedežno pohištvo in mize za domačo in javno uporabo ter taborjenje - 3. del: Mehanske varnostne zahteve za mize

Ta evropski standard določa mehanske varnostne zahteve in preskusne metode za zunanje mize za odrasle za domačo in javno uporabo ter taborjenje ne glede na materiale, model/konstrukcijo ali proizvodne postopke. Ta standard ne zajema miz, zasnova katerih vključuje steklo. Ta dokument se ne uporablja za zunanje pohištvo za intenzivno javno uporabo, ki morda vključuje strožje zahteve, niti za cestno pohištvo in pohištvo, ki je trajno pritrjeno na tla/steno. Dodatek A (informativni) določa smernice za informacije o nakupu. Ne vključuje informacij v zvezi s staranjem in razpadanjem zaradi svetlobe, temperature in vlage.

General Information

Status
Published
Public Enquiry End Date
06-Jul-2014
Publication Date
08-Oct-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Sep-2017
Due Date
20-Nov-2017
Completion Date
09-Oct-2017

Relations

Buy Standard

Standard
EN 581-3:2017
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 581-3:2017
01-november-2017
1DGRPHãþD
SIST EN 581-3:2007
=XQDQMHSRKLãWYR6HGHåQRSRKLãWYRLQPL]H]DGRPDþRLQMDYQRXSRUDERWHU
WDERUMHQMHGHO0HKDQVNHYDUQRVWQH]DKWHYH]DPL]H
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3:
Mechanical safety requirements for tables
Außenmöbel - Sitzmöbel und Tische für den Camping-, Wohn- und Objektbereich - Teil
3: Mechanische Sicherheitsanforderungen für Tische
Mobilier d’extérieur - Sièges et tables à usages domestique, collectif et de camping -
Partie 3 : Exigences mécaniques de sécurité pour les tables
Ta slovenski standard je istoveten z: EN 581-3:2017
ICS:
97.140 Pohištvo Furniture
97.200.30 Oprema za taborjenje in Camping equipment and
tabori camp-sites
SIST EN 581-3:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 581-3:2017

---------------------- Page: 2 ----------------------

SIST EN 581-3:2017


EN 581-3
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2017
EUROPÄISCHE NORM
ICS 97.140; 97.200.30 Supersedes EN 581-3:2007
English Version

Outdoor furniture - Seating and tables for camping,
domestic and contract use - Part 3: Mechanical safety
requirements for tables
Mobilier d'extérieur - Sièges et tables à usages Außenmöbel - Sitzmöbel und Tische für den Camping-,
domestique, collectif et de camping - Partie 3 : Wohn- und Objektbereich - Teil 3: Mechanische
Exigences de sécurité, de résistance et de durabilité Sicherheitsanforderungen für Tische
pour les tables
This European Standard was approved by CEN on 22 October 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 581-3:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 581-3:2017
EN 581-3:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Testing . 5
5 Safety, strength and durability requirements . 5
5.1 General . 5
5.2 Stability, strength and durability . 5
5.2.1 Test sequences and parameters . 5
5.2.2 Requirements . 6
6 Information for use . 7
7 Test report . 7
Annex A (informative) Purchase information (guidelines) . 8

2

---------------------- Page: 4 ----------------------

SIST EN 581-3:2017
EN 581-3:2017 (E)
European foreword
This document (EN 581-3:2017) has been prepared by Technical Committee CEN/TC 207 “Furniture”,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be
withdrawn at the latest by July 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 581-3:2007.
Compared to the current version, the main modifications are:
— update the references with new EN 1730:2012;
— harmonize this standard with EN 581-2:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 581-3:2017
EN 581-3:2017 (E)
1 Scope
This European Standard specifies the minimum requirements for the safety, strength and durability of
all types of outdoor tables for adults, without regard to materials, design/construction or
manufacturing processes.
It does not apply to street furniture.
With the exception of stability tests the stand
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.