Spring-type straight pins - Coiled, light duty (ISO 8751:2007)

This International Standard specifies the characteristics of coiled light duty spring-type straight pins made of steel or of austenitic or martensitic stainless steel, with a nominal diameter, d1, from 1,5 mm to 8 mm inclusive.

Spiralspannstifte - Leichte Ausführung (ISO 8751:2007)

Diese Internationale Norm beschreibt die Eigenschaften von Spiralspannstiften aus Stahl oder aus austenitischem oder martensitischem nicht rostendem Stahl, leichte Ausführung, mit Nenndurchmesser d1 von 1,5 mm bis einschließlich 8 mm.
ANMERKUNG   Spiralspannstifte in schwerer Ausführung und in Regelausführung werden in ISO 8748 und ISO 8750 beschrieben.

Goupilles élastiques spiralées - Série mince (ISO 8751:2007)

L'ISO 8751:2007 spécifie les caractéristiques des goupilles élastiques spiralées, série mince, en acier ou en acier inoxydable austénitique ou martensitique, de diamètre nominal compris entre 1,5 mm et 8 mm inclus.

Valjasto zviti vzmetni zatiči - Lahka izvedba (ISO 8751:2007)

General Information

Status
Published
Publication Date
05-Mar-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Feb-2009
Due Date
25-Apr-2009
Completion Date
06-Mar-2009

Relations

Buy Standard

Standard
EN ISO 8751:2009
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spiralspannstifte - Leichte Ausführung (ISO 8751:2007)Goupilles élastiques spiralées - Série mince (ISO 8751:2007)Spring-type straight pins - Coiled, light duty (ISO 8751:2007)21.060.50Pins, nailsICS:Ta slovenski standard je istoveten z:EN ISO 8751:2007SIST EN ISO 8751:2009en,fr,de01-maj-2009SIST EN ISO 8751:2009SLOVENSKI
STANDARDSIST EN ISO 8751:20011DGRPHãþD



SIST EN ISO 8751:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8751April 2007ICS 21.060.50Supersedes EN ISO 8751:1997
English VersionSpring-type straight pins - Coiled, light duty (ISO 8751:2007)Goupilles élastiques spiralées - Série mince (ISO8751:2007)Spiralspannstifte - Leichte Ausführung (ISO 8751:2007)This European Standard was approved by CEN on 22 March 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8751:2007: ESIST EN ISO 8751:2009



EN ISO 8751:2007 (E)
2
Foreword
This document (EN ISO 8751:2007) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185 "Fasteners”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by October 2007.
This document supersedes EN ISO 8751:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 8751:2007 has been approved by CEN as EN ISO 8751:2007 without any modifications.
SIST EN ISO 8751:2009



Reference numberISO 8751:2007(E)© ISO 2007
INTERNATIONAL STANDARD ISO8751Third edition2007-04-15Spring-type straight pins — Coiled, light duty Goupilles élastiques spiralées — Série mince
SIST EN ISO 8751:2009



ISO 8751:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2007 – All rights reserved
SIST EN ISO 8751:2009



ISO 8751:2007(E) © ISO 2007 – All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.