SIST EN 12301:2020/AC:2021

Oznaka standarda: SIST EN 12301:2020/AC:2021
Koda projekta: 00145C02
Organizacija: SIST
Naslov (angleški): Plastics and rubber machines - Calenders - Safety requirements
Naslov (slovenski): Stroji za predelavo gume in plastike - Kalandri - Varnostne zahteve
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 12301:2020/AC:2021 angleški jezik Active SIST-AC: 0.00 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 83.200
Status: Objavljen
Objavljen: 01-Dec-2021
Refer. št. objave: Sporocila 2021-12
Referenčna oznaka: EN 12301:2019/AC:2021
Področje projekta (angleško): This document specifies safety requirements relating to the design and construction of calenders (see 3.1.1) intended for the calendering, polishing, laminating or embossing of rubber or plastics. This document concerns the calender alone, including the following integrated components: cutting device, stock guides and feeding device, secondary roller. Annex C shows examples of various types of calenders and Annex D shows examples of calendaring processes. This document deals with all significant hazards, hazardous situations or hazardous events relevant to the design and construction of calenders, when the machines are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer during all the phases of the life of the machine as described in EN ISO 12100:2010, 5.4 (see Annex B). This document does not deal with: - hazards generated by the processing of explosive materials, or materials which give rise to an explosive atmosphere; - hazards due to laser or ionizing radiation; - hazards generated if the calender is installed in an explosive atmosphere. Two roll mills are covered by EN 1417. This document is not applicable to calenders manufactured before the date of its publication.
Povezava na standarde
Povezava Ime Datum
Popravek k SIST EN 12301:2020 - Stroji za predelavo gume in plastike - Kalandri - Varnostne zahteve 16-Jun-2021


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi