SIST EN 2810:2002
(Main)Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 650 °C
Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 650 °C
This standard specifies the characteristics of hexagonal slotted / castellated nuts, reduced height, normal across flats, in heat resisting steel, passivated.
Classification: 900 MPa ) / 650 °C )
Luft- und Raumfahrt - Flache Kronenmuttern mit normaler Schlüsselweite, aus hochwarmfestem Stahl, passiviert - Klasse: 900 MPa (bei Raumtemperatur) / 650 °C
Diese Norm legt die Eigenschaften von flachen Kronenmuttern mit normaler Schlüsselweite, aus hochwarmfestem Stahl, passiviert, fest.
Klasse: 900 MPa ) / 650 °C )
Série aérospatiale - Écrous hexagonaux a créneaux, hauteur réduite, surplats normaux, en acier résistant a chaud, passivés - Classification : 900 MPa (a température ambiante) / 650 °C
La présente norme spécifie les caractéristiques des écrous hexagonaux a créneaux, hauteur réduite, surplats normaux, en acier résistant a chaud, passivés.
Classification : 900 MPa ) / 650 °C )
Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 Mpa (at ambient temperature) / 650 oC
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 Mpa (at ambient temperature) / 650 oCLuft- und Raumfahrt - Flache Kronenmuttern mit normaler Schlüsselweite,aus hochwarmfestem Stahl, passiviert - Klasse: 900 MPa (bei Raumtemperatur) / 650 °CSérie aérospatiale - Écrous hexagonaux a créneaux, hauteur réduite, surplats normaux, enacier résistant a chaud, passivés - Classification : 900 MPa (a température ambiante) / 650 °CAerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 650 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2810:2001SIST EN 2810:2002en01-januar-2002SIST EN 2810:2002SLOVENSKI
STANDARD
SIST EN 2810:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2810June 2001ICS 49.030.30English versionAerospace series - Nuts, hexagon, slotted/castellated, reducedheight, normal across flats, in heat resisting steel, passivated -Classification: 900 MPa (at ambient temperature)/650°CSérie aérospatiale - Ecrous hexagonaux à créneaux,hauteur réduite, surplats normaux, en acier résistant àchaud, passivés - Classification: 900 MPa (à températureambiante)/650°CLuft- und Raumfahrt - Flache Kronenmuttern mit normalerSchlüsselweite, aus hochwarmfestem Stahl, passiviert -Klasse: 900 MPa (bei Raumtemperatur)/650°CThis European Standard was approved by CEN on 28 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2810:2001 ESIST EN 2810:2002
Page 2EN 2810:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2001, and conflicting national standards shall bewithdrawn at the latest by December 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 2810:2002
Page 3EN 2810:20011ScopeThis standard specifies the characteristics of hexagonal slotted / castellated nuts, reduced height, normalacross flats, in heat resisting steel, passivated.Classification: 900 MPa 1) / 650 °C 2)2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.