Household and similar electrical appliances - Safety -- Part 2-82: Particular requirements for amusement machines and personal service machines

Deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of amusement machines that are within the scope of this standard are billiard tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pintball machines; video games. Examples of personel service machines that are within the scope of the standard are card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-82: Besondere Anforderungen für Dienstleistungs- und Unterhaltungsautomaten

Appareils électrodomestiques et analogues - Sécurité -- Partie 2-82: Règles particulières pour les machines de service et les machines de divertissement

En anglais seulement.

Gospodinjski in podobni električni aparati - Varnost - 2-82. del: Posebne zahteve za delovne stroje in stroje za zabavo (IEC 60335-2-82:2002)

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Relations

Buy Standard

Standard
EN 60335-2-82:2003
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60335-2-82:2003

STANDARD
december 2003
Gospodinjski in podobni električni aparati - Varnost - 2-82. del: Posebne
zahteve za delovne stroje in stroje za zabavo (IEC 60335-2-82:2002)
Household and similar electrical appliances - Safety - Part 2-82: Particular
requirements for amusement machines and personal service machines
ICS 97.180; 97.200.99 Referenčna številka
SIST EN 60335-2-82:2003(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60335-2-82
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2003

ICS 97.180; 97.200.40 Supersedes EN 60335-2-82:2000


English version


Household and similar electrical appliances –
Safety
Part 2-82: Particular requirements for
amusement machines and personal service machines
(IEC 60335-2-82:2002)


Appareils électrodomestiques et Sicherheit elektrischer Geräte für den
analogues – Hausgebrauch und ähnliche Zwecke
Sécurité Teil 2-82: Besondere Anforderungen für
Partie 2-82: Règles particulières pour Dienstleistungs- und
les machines de service et les machines Unterhaltungsautomaten
de divertissement (IEC 60335-2-82:2002)
(CEI 60335-2-82:2002)




This European Standard was approved by CENELEC on 2003-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60335-2-82:2003 E

---------------------- Page: 2 ----------------------

EN 60335-2-82:2003 - 2 -
Foreword
The text of the International Standard IEC 60335-2-82:2002 (61/2226/FDIS), prepared by
IEC Technical Committee 61, was submitted to the Unique Acceptance Procedure and was approved
by CENELEC as EN 60335-2-82 on 2003-05-01.
This European Standard replaces EN 60335-2-82:2000.
The following dates are applicable:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-05-01
- date on which national standards
conflicting with the EN have to be withdrawn (dow) 2006-05-01
This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical
appliances – Safety – Part 1: General requirements. It was established on the basis of the 2002
edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and
the dates when such changes become applicable will be stated in the relevant amendment or revision
of Part 1.
This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into
the European Standard: Safety requirements for electric amusement machines and personal service
machines.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as
is reasonable. When this standard states "addition", "modification" or "replacement", the relevant text
of Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
- unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
- additional annexes are lettered AA, BB, etc.;
- subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated
noun are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in Annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in Annex ZB to
EN 60335-1.
ip NOTE  In this document, p is used in the margin to indicate instructions for preparing the printed version.
_____________

---------------------- Page: 3 ----------------------

- 3 - EN 60335-2-82:2003
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown
that the risks are mainly of electrical origin and consequently this directive is not applicable. However,
the relevant essential safety requirements of the Machinery Directive are covered by this standard
together with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-82:2002 was approved by CENELEC as a
European Standard without any modification.
____________
p Add:
Annex ZC
(normative)

Normative references to international publications
with their corresponding European publications
Publication Year Title EN/HD Year
IEC 60068-2-52 1996 Environmental testing – Part 2: Tests - Test EN 60068-2-52 1996
Kb: Salt mist, cyclic (sodium chloride solution)

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



60335-2-82
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2002-11


Appareils électrodomestiques et analogues –
Sécurité –
Partie 2-82:
Règles particulières pour les machines de
divertissement et les machines de service
pour les personnes

Household and similar electrical appliances –
Safety –
Part 2-82:
Particular requirements for amusement machines
and personal service machines
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
R
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60335-2-82  IEC:2005 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9

1 Scope.11
2 Normative references .13
3 Definitions .13
4 General requirement.17
5 General conditions for the tests .17
6 Classification.17
7 Marking and instructions.19
8 Protection against access to live parts.21
9 Starting of motor-operated appliances .21
10 Power input and current .21
11 Heating .21
12 Void.23
13 Leakage current and electric strength at operating temperature.23
14 Transient overvoltages .23
15 Moisture resistance .23
16 Leakage current and electric strength.23
17 Overload protection of transformers and associated circuits .25
18 Endurance.25
19 Abnormal operation .25
20 Stability and mechanical hazards .27
21 Mechanical strengt,bh .29
22 Construction .29
23 Internal wiring.31
24 Components .33
25 Supply connection and external flexible cords .33
26 Terminals for external conductors.35
27 Provision for earthing .35
28 Screws and connections .35
29 Clearances, creepage distances and solid insulation .35
30 Resistance to heat and fire.35
31 Resistance to rusting.37
32 Radiation, toxicity and similar hazards.37


Annexes .39


Bibliography.39

---------------------- Page: 6 ----------------------

60335-2-82  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –

Part 2-82: Particular requirements for amusement machines
and personal service machines


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This part of International Standard IEC 60335 has been prepared by IEC technical committee
61: Safety of household and similar electrical appliances.
This second edition cancels and replaces the first edition published in 1999. It constitutes a
technical revision.
This bilingual version (2005-06) replaces the English version.
The text of this part of IEC 60335 is based on the following documents:
FDIS Report on voting
61/2226/FDIS 61/2301/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 7 ----------------------

60335-2-82  IEC:2005 – 7 –
The French version of this standard has not been voted upon.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fourth edition (2001) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for electric amusement
machines and personal service machines.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
The following differences exist in the countries indicated below.
– Clause 1: Gaming machines have to comply with IEC 60950 (South Africa).
– 6.1: Class 0 appliances are allowed provided that their rated voltage does not exceed 150 V (Japan and
USA).
– 6.1: Class 0I is allowed (Japan).
– 19.101: The fault condition with the contactor locked in the on-position is not applied (USA).
– 20.1: The test is different (USA).
– Clause 21: The impact energy is different (USA).
– 25.7: Lighter supply cords are allowed (USA).
– 25.7: The requirements for supply cords are different. Additional protection of the supply cord is required
(Australia).

The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

60335-2-82  IEC:2005 – 9 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
normal use taking into account the manufacturer’s instructions. It also covers abnormal
situations that can be expected in practice.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the appliance is connected to the supply
mains. However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and tested according to the intent of
the requirements and, if found to be substantially equivalent, may be considered to comply
with the standard.

---------------------- Page: 9 ----------------------

60335-2-82  IEC:2005 – 11 –
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –

Part 2-82: Particular requirements for amusement machines
and personal service machines



1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric commercial amusement machines
and personal service machines, their rated voltage being not more than 250 V for single-
phase appliances and 480 V for other appliances.
NOTE 101 Examples of appliances that are within the scope of this standard are
– amusement machines:
• billiard tables;
• bowling machines;
• dartboards;
• driving simulators;
• gaming machines;
• kiddie rides;
• laser shooting appliances;
• pinball machines;
• video games.
– personal service machines:
• card re-value machines;
• currency dispensers;
• luggage lockers;
• weighing machines;
• shoe shining appliances.
NOTE 102 If part of the appliance is within the scope of IEC 60065 or IEC 60950, the part has to comply with the
relevant standard.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by users and maintenance persons.
NOTE 103 Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be
necessary;
– in many countries additional requirements are specified by the national authorities responsible for health, for
the protection of labour and similar authorities.
NOTE 104 This standard does not apply to
– appliances intended exclusively for household use;
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
– appliances for washing cars;
– dispensing appliances and vending machines (IEC 60335-2-75);

---------------------- Page: 10 ----------------------

60335-2-82  IEC:2005 – 13 –
– appliances within the scope of IEC 60065, such as jukeboxes and household video games;
– appliances within the scope of IEC 60950, such as copying machines, ticket machines and automatic teller
machines;
– appliances intended to be used when a trained attendant is present, such as virtual reality systems;
– equipment intended exclusively for fairgrounds, such as carousels.
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60068-2-52:1996, Environmental testing – Part 2: Tests – Test Kb: Salt mist, cyclic
(sodium chloride solution)
3 Definitions
This clause of Part 1 is applicable except as follows.
3.1.9 Replacement:
normal operation
operation of the appliance under the following conditions
The appliance is operated in the stand-by mode until steady conditions are established and
then under the most unfavourable conditions of normal use.
The appliance is refilled when necessary in accordance with the instructions for use, or the
instructions for maintenance, and the next operating period started as soon as possible.
Appliances that support persons in normal use are loaded as follows:
– kiddie rides, 50 kg for each riding position;
– other appliances, 100 kg for the first riding position and 75 kg for each additional riding
position.
NOTE 101 The riding position may be for a sitting or standing person.
If the instructions state that higher loads are allowed, the appliance is loaded accordingly.
Audio amplifiers are operated in accordance with the normal operating conditions specified in
IEC 60065.
3.6.2 Replacement:
detachable part
part that can be removed without the aid of a tool, a part that is removed in accordance with
the instructions for use or instructions for maintenance, even if a tool or access key is
needed for removal, or a part that does not fulfill the test of 22.11
NOTE 101 If a part has to be removed for installation purposes, this part is not considered to be detachable even
if the instructions state that it is to be removed.
NOTE 102 A part that can be opened is considered to be a part that can be removed.

---------------------- Page: 11 ----------------------

60335-2-82  IEC:2005 – 15 –
3.7.3 Replacement:
thermal cut-out
device that during abnormal operation limits the temperature of the controlled part by
automatically opening the circuit, or reducing the current, and constructed so that its setting
cannot be altered by the user or the maintenance person
3.8.5 Replacement:
maintenance operation
operation that the user or maintenance person is intended to perform as stated in the
instructions for use, or the instructions for maintenance, or as marked on the appliance
NOTE 101 The instructions for maintenance marked on the appliance, or supplied with the appliance or
subsequently, are applicable only to the user area and the maintenance area.
NOTE 102 Maintenance operation includes preparing and commissioning the appliance for new operating
methods. It does not include operations that are to be performed in the service area.
3.101
stand-by mode
mode of the appliance when it is energized and ready for use, while filled as intended but with
empty cash boxes
3.102
access key
key or other means that gives access to the maintenance area but does not give access to
the service area
NOTE “Other means” includes a tool or operation by codes or signals produced by optical or electromagnetic
sources.
3.103
override key
key or other means that is used to render an interlock inoperative
3.104
instructions for maintenance
instructions explaining how to carry out cleaning, replenishing, coin collecting, setting of
controls and similar operations
3.105
maintenance person
person who maintains the appliance in accordance with the instructions for maintenance
3.106
user area
area where access is gained without the use of an access key or a tool
3.107
maintenance area
area where access can only be gained by the use of an access key
3.108
service area
area where access cannot be gained by the use of an access key alone

---------------------- Page: 12 ----------------------

60335-2-82  IEC:2005 – 17 –
3.109
kiddie ride
moving appliance having a stationary base for use by one or two children between the ages of
three and ten years, under the supervision of an adult
4 General requirement
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.
5.6 Replacement:
Controls or switching devices in the user area are adjusted to the most unfavourable setting.
Controls, switching devices or other parts in the maintenance area are adjusted to the most
unfavourable setting within the limits stated in the instructions for maintenance.
NOTE 101 Controls or switching devices in the service area are not adjusted.
5.9 Addition:
When alternative software is made available by the appliance manufacturer, the appliance is
tested with the software that gives the most unfavourable results.
5.101 The requirements of this standard for the maintenance area are applicable when the
instructions for maintenance are being followed. If an override key is provided for access
to the maintenance area, it is used before a test is carried out if this is more unfavourable.
5.102 When reference is made to the application of test probe B, test probe 18 of IEC 61032
is also applied in the user area.
5.103 Appliances incorporating transformers, electronic circuits and lamps are tested as
motor-operated appliances unless they incorporate a heating element, in which case they
are tested as combined appliances.
6 Classification
This clause of Part 1 is applicable except as follows.
6.1 Modification:
Appliances shall be class I, class II or class III.
6.2 Addition:
Appliances intended for outdoor use shall be at least IPX4.
Appliances that may be cleaned by water jets, or installed where water jets are liable to be
used, shall be at least IPX5.

---------------------- Page: 13 ----------------------

60335-2-82  IEC:2005 – 19 –
Appliances that use water jets in normal use shall be at least IPX5 unless the water jet cannot
be directed at the enclosure of electrical parts, in which case it may be IPX4.
7 Marking and instructions
This clause of Part 1 is applicable except as follows.
7.1 Addition:
For appliances incorporating a socket outlet, the voltage, nature of the supply and current or
power output shall be marked in the vicinity of the socket outlet.
7.3 Addition:
The requirement also applies when the adjustment has to be made by the maintenance
person.
7.12.1 Addition:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.