Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 4: Combination of performance levels for modular cabinets

This part of IEC 61587 provides the combinations of different degrees of protection for cabinet systems regarding IP code, climate levels, static and dynamics load tests, electromagnetic shielding and seismic requirements. Optimal economical solution can be ensured by ordering a cabinet with specific properties for which this design guide provides the easy selection of defined performance levels.

Mechanische Bauweisen für elektronische Einrichtungen - Prüfungen für die Normenreihen IEC 60917 und IEC 60297 - Teil 4: Kombination von Anforderungsstufen für modulare Schränke

Structures mécaniques pour équipement électronique - Essais pour la CEI 60917 et la CEI 60297 - Partie 4: Combinaison des niveaux de performance pour les baies modulaires

La CEI 61587-4:2012 donne des combinaisons de différents degrés de protection pour les systèmes de baie concernant les exigences en matière de code IP, de niveaux climatiques, d'essais de charges statiques et dynamiques, de blindage électromagnétique et de niveau sismique. Le présent guide de conception permet une sélection facile des niveaux de performance définis pour des économies optimisées par la commande d'une baie présentant des propriétés spécifiques. Mots clé : baies modulaires

Mehanske strukture elektronske opreme - Preskusi za IEC 60917 in IEC 60297 - 4. del: Kombinacija ravni zmogljivosti modularnih omaric

Ta del standarda IEC 61587 določa kombinacije različnih stopenj zaščite za sisteme omaric v zvezi s kodo IP, podnebnimi ravnmi, statičnimi in dinamičnimi preskusi obremenitve, elektromagnetnim zaslanjanjem in potresnimi zahtevami. Optimalna ekonomska rešitev se lahko zagotovi z naročilom omaric s specifičnimi lastnostmi, za katere je v tem načrtu

General Information

Status
Published
Publication Date
14-Nov-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Oct-2012
Due Date
21-Dec-2012
Completion Date
15-Nov-2012

Buy Standard

Standard
EN 61587-4:2013
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61587-4:2013
01-januar-2013
Mehanske strukture elektronske opreme - Preskusi za IEC 60917 in IEC 60297 - 4.
del: Kombinacija ravni zmogljivosti modularnih omaric
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -
Part 4: Combination of performance levels for modular cabinets
Structures mécaniques pour équipement électronique - Essais pour la CEI 60917 et la
CEI 60297 - Partie 4: Combinaison des niveaux de performance pour les baies
modulaires
Ta slovenski standard je istoveten z: EN 61587-4:2012
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 61587-4:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61587-4:2013

---------------------- Page: 2 ----------------------

SIST EN 61587-4:2013

EUROPEAN STANDARD
EN 61587-4

NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM

ICS 31.240


English version


Mechanical structures for electronic equipment -
Tests for IEC 60917 and IEC 60297 series -
Part 4: Combination of performance levels for modular cabinets
(IEC 61587-4:2012)


Structures mécaniques pour équipement Mechanische Bauweisen für elektronische
électronique - Einrichtungen -
Essais pour les séries CEI 60917 Prüfungen für die Normenreihen
et CEI 60297 - IEC 60917 und IEC 60297 -
Partie 4: Combinaison des niveaux de Teil 4: Kombination von
performance pour les baies modulaires Anforderungsstufen für modulare
(CEI 61587-4:2012) Schränke
(IEC 61587-4:2012)




This European Standard was approved by CENELEC on 2012-09-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61587-4:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61587-4:2013
EN 61587-4:2012 - 2 -
Foreword
The text of document 48D/514/FDIS, future edition 1 of IEC 61587-4, prepared by SC 48D
"Mechanical structures for electronic equipment" of IEC/TC 48 "Electromechanical components and
mechanical structures for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61587-4:2012.
The following dates are fixed:
(dop) 2013-06-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-09-17
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61587-4:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60297 Series NOTE Harmonised as EN 60297 Series (not modified).
IEC 60917 Series NOTE Harmonised as EN 60917 Series (not modified).
IEC 60950-1 NOTE Harmonised as EN 60950-1.

---------------------- Page: 4 ----------------------

SIST EN 61587-4:2013
- 3 - EN 61587-4:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60529 - Degrees of protection provided by EN 60529 -
enclosures (IP Code)


IEC 61587-1 - Mechanical structures for electronic EN 61587-1 -
equipment - Tests for IEC 60917
and IEC 60297 series -
Part 1: Environmental requirements, test
set-up and safety aspects for cabinets,
racks, subracks and chassis under indoor
conditions


IEC 61587-2 - Mechanical structures for electronic EN 61587-2 -
equipment - Tests for IEC 60917 and
IEC 60297 -
Part 2: Seismic tests for cabinets
and racks


IEC 61587-3 - Mechanical structures for electronic EN 61587-3 -
equipment - Tests for IEC 60917
and IEC 60297 -
Part 3: Electromagnetic shielding
performance tests for cabinets, racks
and subracks

---------------------- Page: 5 ----------------------

SIST EN 61587-4:2013

---------------------- Page: 6 ----------------------

SIST EN 61587-4:2013



IEC 61587-4

®


Edition 1.0 2012-08




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Mechanical structures for electronic equipment – Tests for IEC 60917 and

IEC 60297 series –

Part 4: Combination of performance levels for modular cabinets




Structures mécaniques pour équipement électronique – Essais pour les séries

CEI 60917 et CEI 60297 –


Partie 4: Combinaison des niveaux de performance pour les baies modulaires













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX M


ICS 31.240 ISBN 978-2-83220-199-2



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61587-4:2013
– 2 – 61587-4 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
Bibliography . 12

Figure 1 – Arrangement overview of a modular cabinet system . 5
Figure 2 – Basic modular cabinet . 6

Table 1 – List of requirements used to specify a cabinet . 8
Table 2 – Protection against dust and water . 8
Table 3 – Climatic conditions . 8
Table 4 – Industrial atmosphere . 9
Table 5 – Static load test . 9
Table 6 – Dynamic load test . 9
Table 7 – Impact load test . 9
Table 8 – Seismic load test . 9
Table 9 – Electromagnetic shielding . 10
Table 10 – Examples of performance level combinations . 10
Table 11 – Typical application examples . 11

---------------------- Page: 8 ----------------------

SIST EN 61587-4:2013
61587-4 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
TESTS FOR IEC 60917 AND IEC 60297 SERIES –

Part 4: Combination of performance levels for modular cabinets


 FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility tha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.