SIST EN 12380:2003
(Main)Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity
Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity
This European Standard establishes requirements, test methods and evaluation of conformity for air admittance
valves to be used in drainage systems installed inside buildings in accordance with EN 12056-2 and EN 12056-5.
It specifies the performance requirements of air admittance valves and how to test them to demonstrate compliance
with this standard.
Belüftungsventile für Entwässerungssysteme - Anforderungen, Prüfverfahren und Konformitätsbewertung
In dieser europäischen Norm werden verschiedene relevante Verfahren zur Leistungsprüfung festgelegt.
Clapets équilibreurs de pression pour systemes d'évacuation - Exigences, méthodes d'essais et évaluation de conformité
La présente Norme européenne fixe les exigences, les méthodes d'essais et l'évaluation de la conformité des clapets équilibreurs de pression a utiliser dans les systemes gravitaires a l'intérieur des bâtiments, conformément aux EN 12056-2 et 12056-5.
Elle spécifie les exigences de performances des clapets équilibreurs de pression et les méthodes d'essai permettant d'apporter la preuve de leur conformité a la présente norme.
Zračniki za kanalizacijske sisteme - Zahteve, preskusne metode in ocena skladnosti
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformityVNODGQRVWLClapets équilibreurs de pression pour systemes d'évacuation - Exigences, méthodes d'essais et évaluation de conformitéBelüftungsventile für Entwässerungssysteme - Anforderungen, Prüfverfahren und Konformitätsbewertung91.140.80Drenažni sistemiDrainage systems23.060.99Drugi ventiliOther valvesICS:SIST EN 12380:2003enTa slovenski standard je istoveten z:EN 12380:200201-oktober-2003SIST EN 12380:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12380December 2002ICS 23.060.99; 91.140.80English versionAir admittance valves for drainage systems - Requirements,tests methods and evaluation of conformityClapets équilibreurs de pression pour systèmesd'évacuation - Exigences, méthodes d'essais et évaluationde conformitéBelüftungsventile für Entwässerungssysteme -Anforderungen, Prüfverfahren und KonformitätsbewertungThis European Standard was approved by CEN on 23 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12380:2002 E
EN 12380:2002 (E)2ContentspageForeword.4Introduction.51Scope.52Normative references.53Terms, definitions and symbols.63.1Terms and definitions.73.2Symbols.74Types of air admittance valves.75Requirements.85.1General.85.2Connections.85.3Airtightness.85.4Durability.85.5Effectiveness.86Test methods.86.1General procedure.96.1.1Sampling for tests.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.