SIST EN IEC 61968-3:2018

SLOVENSKI STANDARD
SIST EN IEC 61968-3:2018
01-oktober-2018
1DGRPHãþD
SIST EN 61968-3:2004
=GUXåHYDQMHDSOLNDFLMSULRVNUEL]HOHNWULþQRHQHJLMR6LVWHPVNLYPHVQLNL]D
XSUDYOMDQMHRPUHåMDGHO9PHVQLNL]DGHORYDQMHRPUHåMD
Application integration at electric utilities - System interfaces for distribution management
- Part 3: Interface for network operations
Integration von Anwendungen in Anlagen der Elektrizitätsversorgung -
Systemschnittstellen für Netzführung - Teil 3: Schnittstelle für Netzbetriebsarten
Intégration des applications dans les entreprises de distribution électrique - Système
d'interfaces pour la gestion de la distribution - Partie 3: Interface pour l'exploitation du
réseau
Ta slovenski standard je istoveten z: EN IEC 61968-3:2018
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN IEC 61968-3:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 61968-3:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 61968-3:2018


EUROPEAN STANDARD EN IEC 61968-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2018
ICS 33.200 Supersedes EN 61968-3:2004
English Version
Application integration at electric utilities - System interfaces for
distribution management - Part 3: Interface for network
operations
(IEC 61968-3:2017)
Intégration d'applications pour les services électriques - Integration von Anwendungen in Anlagen der
Interfaces système pour la gestion de la distribution - Partie Elektrizitätsversorgung - Systemschnittstellen für
3: Interface pour l'exploitation du réseau Netzführung - Teil 3: Schnittstelle für Netzbetriebsarten
(IEC 61968-3:2017) (IEC 61968-3:2017)
This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61968-3:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 61968-3:2018
EN IEC 61968-3:2018 (E)
European foreword
The text of document 57/1810/FDIS, future edition 2 of IEC 61968-3, prepared by IEC/TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61968-3:2018.

The following dates are fixed:
(dop) 2018-11-18
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-18
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61968-3:2004.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.

Endorsement notice
The text of the International Standard IEC 61968-3:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61968-4 NOTE Harmonized as EN 61968-4.
IEC 61968-6 NOTE Harmonized as EN 61968-6.
IEC 61968-8 NOTE Harmonized as EN 61968-8.
IEC 61968-9 NOTE Harmonized as EN 61968-9.
IEC 61968-11 NOTE Harmonized as EN 61968-11.
IEC 61968-13 NOTE Harmonized as EN 61968-13.
IEC 62361-100 NOTE Harmonized as EN 62361-100.

2

---------------------- Page: 4 ----------------------

SIST EN IEC 61968-3:2018
EN IEC 61968-3:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61968-1 -  Application integration at electric utilities - EN 61968-1 -
System interfaces for distribution
management -- Part 1: Interface
architecture and general requirements
IEC/TS 61968-2 -  Application integration at electric utilities - - -
System interfaces for distribution
management -- Part 2: Glossary
IEC 61968-100 -  Application integration at electric utilities - EN 61968-100 -
System interfaces for distribution
management -- Part 100: Implementation
profiles
IEC 61970-301 -  Energy Management System Application EN 61970-301 -
Program Interface (EMS-API) - Part 301:
Common information model (CIM) base


3

---------------------- Page: 5 ----------------------

SIST EN IEC 61968-3:2018

---------------------- Page: 6 ----------------------

SIST EN IEC 61968-3:2018




IEC 61968-3

®


Edition 2.0 2017-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Application integration at electric utilities – System interfaces for distribution

management –

Part 3: Interface for network operations




Intégration d'applications pour les services électriques – Interfaces système

pour la gestion de la distribution –


Partie 3: Interface pour l'exploitation du réseau













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.200 ISBN 978-2-8322-4084-7



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 61968-3:2018
– 2 – IEC 61968-3:2017 © IEC 2017
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 10
3 Terms, definitions and abbreviated terms . 11
3.1 Terms and definitions . 11
3.2 Abbreviated terms . 11
4 Reference and Information Models . 11
4.1 General approach to network operations . 11
4.2 Reference Model . 12
4.3 Interface Reference Model . 13
4.4 Network operations functions and components . 13
4.5 Static Information Model . 15
4.5.1 General . 15
4.5.2 Classes related to network operations . 15
5 Network operations message payloads . 15
5.1 General . 15
5.2 OperationsConfiguration payload . 16
5.2.1 General . 16
5.2.2 Message payload . 16
5.3 MeasurementsAndControls payload . 17
5.3.1 General . 17
5.3.2 Measurement . 17
5.3.3 Control . 18
5.3.4 Message payload . 18
5.4 TemporaryNetworkChanges payload . 21
5.4.1 General . 21
5.4.2 Message payloads . 22
5.5 SwitchingPlan payload . 27
5.5.1 General . 27
5.5.2 Message payload . 28
5.6 OperationalTags payload . 36
5.6.1 General . 36
5.6.2 Message payload . 37
5.7 TroubleTicket payload. 38
5.8 Incident payload . 39
5.8.1 General . 39
5.8.2 Message payload . 41
5.9 Outage payload . 42
5.9.1 General . 42
5.9.2 Message payload . 44
5.10 Metering message payloads . 45
5.10.1 EndDeviceEvent . 45
5.10.2 MeterReading . 45

---------------------- Page: 8 ----------------------

SIST EN IEC 61968-3:2018
IEC 61968-3:2017 © IEC 2017 – 3 –
5.11 Work message payloads . 46
5.11.1 WorkOrder . 46
5.12 SwitchingOrder . 47
5.12.1 General . 47
5.12.2 Message payload . 48
5.13 TroubleOrder . 49
5.13.1 General . 49
5.13.2 Message payload . 50
5.14 OutageSchedule . 51
5.14.1 General . 51
5.14.2 Message payload . 52
6 Document Conventions . 55
6.1 UML diagrams. 55
6.2 Message payload definitions . 55
6.2.1 General . 55
6.2.2 Mandatory versus Optional . 55
6.3 Synchronous versus Asynchronous Messages . 55
6.4 Message exchanges . 55
Annex A (informative) Use Cases . 56
A.1 General . 56
A.2 FLISR . 56
A.2.1 Overview . 56
A.2.2 FLISR for SCADA-detected outage, SCADA switching . 56
A.2.3 FLISR for trouble call and AMI outage, crew switching . 58
A.3 Planned outage . 62
A.3.1 Planned outage for maintenance – Manual process . 62
A.3.2 Planned outage for maintenance – Crew switching . 63
Annex B (normative) XML Schemas for message payloads . 68
B.1 General . 68
B.2 Incidents message payload . 68
B.3 MeasurementsAndControls message payload. 75
B.4 OperationalTags message payload . 82
B.5 OperationsConfig message payload . 85
B.6 OutagesAndFaults message payload . 87
B.7 OutageSchedules message payload . 96
B.8 SwitchingOrders message payload . 117
B.9 SwitchingPlans message payload . 123
B.10 TemporaryNetworkChanges message payload . 140
B.11 TroubleOrders message payload . 150
Bibliography . 160

Figure 1 – IEC 61968-3 Scope . 10
Figure 2 – IEC 61968-3 Reference Model . 12
Figure 3 – OperationsConfiguration message payload . 16
Figure 4 – MeasurementsAndControls . 17

---------------------- Page: 9 ----------------------

SIST EN IEC 61968-3:2018
– 4 – IEC 61968-3:2017 © IEC 2017
Figure 5 – MeasurementsAndControls message payload . 19
Figure 6 – MeasurementsAndControls message payload, AnalogValue detail . 20
Figure 7 – MeasurementsAndControls message payload, Setpoint
(AnalogControl) detail . 21
Figure 8 – Temporary Network Changes . 22
Figure 9 – TemporaryNetworkChanges message payload . 22
Figure 10 – TemporaryNetworkChanges message payload, Clamp detail . 23
Figure 11 – TemporaryNetworkChanges message payload, Cut detail . 24
Figure 12 – TemporaryNetworkChanges message payload, EnergySource
Details . 25
Figure 13 – TemporaryNetworkChanges message payload, Ground details . 26
Figure 14 – TemporaryNetworkChanges message payload, Jumper Details. 27
Figure 15 – Switching Plan . 28
Figure 16 – SwitchingPlans message payload . 29
Figure 17 – SwitchingPlans message payload, SafetyDocument detail . 30
Figure 18 – SwitchingPlan message payload, ClearanceAction detail . 31
Figure 19 – SwitchingPlan message payload, GenericAction detail . 32
Figure 20 – SwitchingPlan message payload, EnergySourceAction detail . 32
Figure 21 – SwitchingPlan message payload, CutAction detail . 33
Figure 22 – SwitchingPlan message payload, GroundAction detail . 34
Figure 23 – SwitchingPlan message payload, JumperAction detail . 34
Figure 24 – SwitchingPlan message payload, SwitchingAction detail . 35
Figure 25 – SwitchingPlan message payload, TagAction detail . 36
Figure 26 – Tags . 37
Figure 27 – OperationalTags message payload . 38
Figure 28 – Trouble Ticket . 39
Figure 29 – Incident . 40
Figure 30 – Incident message payload . 41
Figure 31 – Outage . 42
Figure 32 – OutagesAndFaults message payload . 44
Figure 33 – End Device Event . 45
Figure 34 – Meter Reading. 46
Figure 35 – Work Order . 47
Figure 36 – Switching Order . 48
Figure 37 – SwitchingOrder message payload . 49
Figure 38 – Trouble Order . 50
Figure 39 – TroubleOrder message payload . 51
Figure 40 – Outage Schedule . 52
Figure 41 – OutageSchedule message payload . 53

---------------------- Page: 10 ----------------------

SIST EN IEC 61968-3:2018
IEC 61968-3:2017 © IEC 2017 – 5 –
Figure 42 – OutageSchedule message payload, PlannedOutages detail . 54
Figure A.1 – FLISR for SCADA-Detected Outage, SCADA Switching . 57
Figure A.2 – FLISR for trouble call and AMI outage, crew switching . 60
Figure A.3 – Planned outage for maintenance – Manual process . 63
Figure A.4 – Planned outage for maintenance, crew switching . 65

Table 1 – Business Functions and Abstract Components . 14
Table 2 – Interpretation of Network Operations Business Functions . 15
Table 3 – Classes related to network operations . 15
Table A.1 – Message Flow for FLISR SCADA-Detected Outage, SCADA Switching . 58
Table A.2 – Message flows for FLISR for trouble call and AMI outage, crew switching . 61
Table A.3 – Message flows for planned outage for maintenance, crew switching . 66

---------------------- Page: 11 ----------------------

SIST EN IEC 61968-3:2018
– 6 – IEC 61968-3:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

APPLICATION INTEGRATION AT ELECTRIC UTILITIES –
SYSTEM INTERFACES FOR DISTRIBUTION MANAGEMENT –

Part 3: Interface for network operations

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61968-3 has been prepared by IEC technical committee 57: Power
systems management and associated information exchange.
The text of this standard is based on the following documents:
FDIS Report on voting
57/1810/FDIS 57/1841/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This second edition cancels and replaces the first edition published in 2004. It constitutes a
technical revision.

---------------------- Page: 12 ----------------------

SIST EN IEC 61968-3:2018
IEC 61968-3:2017 © IEC 2017 – 7 –
This edition includes the following significant technical changes with respect to the previous
edition:
a) Replaced Measurement list with Measurement and Controls.
b) Replaced OperationalRestriction with Tag.
c) Replaced OutageRecord with Outage.
d) Replaced SafetyDocument with ClearanceDocument.
e) Replaced SwitchingSchedule with SwitchingOrder.
f) Added SwitchingPlan.
g) Added Temporary Network Change.
h) Added TroubleTicket.
i) Added Incident.
j) Added TroubleOrder.
k) Added use cases and sequence diagrams.
In this standard, the following print types are used:
– tokens: in arial black type
A list of all parts of the IEC 61968 series, under the general title: Application integration at
electric utilities – System interfaces for distribution management can be found on the IEC
website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 13 ----------------------

SIST EN IEC 61968-3:2018
– 8 – IEC 61968-3:2017 © IEC 2017
INTRODUCTION
The purpose of this
...