Technical product documentation - Parts lists

This International Standard provides minimum requirements for parts lists to provide necessary information, e.g. for the production, procurement or maintenance of the parts. This International Standard covers manual as well as computer-generated parts lists.

Documentation technique de produits - Nomenclatures de composants

Tehnične risbe - Kosovnice

Ta mednarodni standard zagotavlja minimalne zahteve za kosovnice za zagotavljanje potrebnih informacij, t.j. izdelavo, naročilo ali vzdrževanje delov. Ta mednarodni standard zajema ročno kot tudi računalniško izdelane kosovnice.

General Information

Status
Published
Publication Date
09-Feb-2010
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2010
Due Date
08-Apr-2010
Completion Date
10-Feb-2010

Relations

Buy Standard

Standard
ISO 7573:2008 - Technical product documentation -- Parts lists
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7573:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 7573
Second edition
2008-11-01

Technical product documentation —
Parts lists
Documentation technique de produits — Nomenclatures de composants




Reference number
ISO 7573:2008(E)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 7573:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 7573:2008(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 General .2
5 Parts lists arrangement.2
5.1 Position.2
5.2 Data fields for parts lists.3
Annex A (informative) Examples of layout arrangements for parts lists .5
Bibliography.8

© ISO 2008 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 7573:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7573 was prepared by Technical Committee ISO/TC 10, Technical product documentation,
Subcommittee SC 1, Basic conventions.
This second edition cancels and replaces the first edition (ISO 7573:1983), which has been technically revised.

iv © ISO 2008 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 7573:2008(E)

Technical product documentation — Parts lists
1 Scope
This International Standard provides minimum requirements for parts lists to provide necessary information,
e.g. for the production, procurement or maintenance of the parts. This International Standard covers manual
as well as computer-generated parts lists.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 128-20, Technical drawings — General principles of presentation — Part 20: Basic conventions for lines
ISO 5457, Technical product documentation — Sizes and layout of drawing sheets
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
assembly
number of component parts fitted together to perform a specific function
3.2
part reference
identification of component parts of assemblies and/or the identification of individual parts on the same
drawing
NOTE 1 Adapted from ISO 6433:1981.
NOTE 2 Part references are document-based, as opposed to reference designations, which are structure-based.
Identical parts on a drawing are required to have the same part reference, preferably a number (according to ISO 6433),
while each occurrence of an object in a structure is required to have a unique reference designation (according to
IEC 61346-1).
3.3
quantity
total number of the particular part(s) necessary for one specific assembly
NOTE Quantity can express the number of parts or the amount of material.
3.4
unit
entity adopted as the basis or standard of measurement
NOTE The SI units, including their multiple prefixes, should be used.
© ISO 2008 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO 7573:2008(E)
3.5
reference designation
identifier of a specific object with respect to the system of which the object is a constituent, based on one or
more aspects of that system
[IEC 61346-1]
3.6
part number
unique identification of a part for a particular organization
3.7
part name
text designation of a part
3.8
technical data
...

SLOVENSKI STANDARD
SIST ISO 7573:2010
01-marec-2010
1DGRPHãþD
SIST ISO 7573:1995
7HKQLþQHULVEH.RVRYQLFH
Technical product documentation - Parts lists
Documentation technique de produits - Nomenclatures de composants
Ta slovenski standard je istoveten z: ISO 7573:2008
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
SIST ISO 7573:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7573:2010

---------------------- Page: 2 ----------------------

SIST ISO 7573:2010

INTERNATIONAL ISO
STANDARD 7573
Second edition
2008-11-01

Technical product documentation —
Parts lists
Documentation technique de produits — Nomenclatures de composants




Reference number
ISO 7573:2008(E)
©
ISO 2008

---------------------- Page: 3 ----------------------

SIST ISO 7573:2010
ISO 7573:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 7573:2010
ISO 7573:2008(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 General .2
5 Parts lists arrangement.2
5.1 Position.2
5.2 Data fields for parts lists.3
Annex A (informative) Examples of layout arrangements for parts lists .5
Bibliography.8

© ISO 2008 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 7573:2010
ISO 7573:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7573 was prepared by Technical Committee ISO/TC 10, Technical product documentation,
Subcommittee SC 1, Basic conventions.
This second edition cancels and replaces the first edition (ISO 7573:1983), which has been technically revised.

iv © ISO 2008 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 7573:2010
INTERNATIONAL STANDARD ISO 7573:2008(E)

Technical product documentation — Parts lists
1 Scope
This International Standard provides minimum requirements for parts lists to provide necessary information,
e.g. for the production, procurement or maintenance of the parts. This International Standard covers manual
as well as computer-generated parts lists.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 128-20, Technical drawings — General principles of presentation — Part 20: Basic conventions for lines
ISO 5457, Technical product documentation — Sizes and layout of drawing sheets
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
assembly
number of component parts fitted together to perform a specific function
3.2
part reference
identification of component parts of assemblies and/or the identification of individual parts on the same
drawing
NOTE 1 Adapted from ISO 6433:1981.
NOTE 2 Part references are document-based, as opposed to reference designations, which are structure-based.
Identical parts on a drawing are required to have the same part reference, preferably a number (according to ISO 6433),
while each occurrence of an object in a structure is required to have a unique reference designation (according to
IEC 61346-1).
3.3
quantity
total number of the particular part(s) necessary for one specific assembly
NOTE Quantity can express the number of parts or the amount of material.
3.4
unit
entity adopted as the basis or standard of measurement
NOTE The SI units, including their multiple prefixes, should be used.
© ISO 2008 – All rights reserved 1

---------------------- Page: 7 ----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.