Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997)

This part of ISO 5832 specifies the characteristics of, and corresponding test methods for, wrought cobalt-nickel-chromium-molybdenum alloy for use in the manufacture of surgical implants.
NOTE - The mechanical properties of a Sample obtained from a finished product made of this alloy may not necessarily
comply with the specifications given in this part of ISO 5832.

Chirurgische Implantate - Metallische Werkstoffe - Teil 6: Kobalt-Nickel-Chrom-Molybdän Schmiedelegierung (ISO 5832-6:1997)

Dieser Teil der ISO 5832 legt die Eigenschaften von und die entsprechenden Prüfverfahren für die geschmiedete Kobalt Nickel Chrom Molybdän Legierung fest, die zur Herstellung von chirurgischen Implantaten verwendet wird.
ANMERKUNG   Die mechanischen Eigenschaften einer Probe eines Fertigproduktes aus dieser Legierung, braucht nicht notwendigerweise mit den festgelegten Eigenschaften dieses Teils von ISO 5832 übereinstimmen.

Implants chirurgicaux - Produits à base de métaux - Partie 6: Alliage corroyé à base de cobalt, de nickel, de chrome et de molybdène (ISO 5832-6:1997)

La présente partie de l'ISO 5832 prescrit les caractéristiques et les méthodes d'essai correspondantes pour l'alliage corroyé à base de cobalt, de nickel, de chrome et de molybdène utilisé pour la fabrication des implants chirurgicaux.
NOTE -- Les caractéristiques mécaniques d'un échantillon prélevé sur un produit fini fabriqué avec cet alliage peuvent ne pas être nécessairement conformes aux valeurs données dans la présente partie de l'ISO 5832.

Vsadki (implantati) za kirurgijo - Kovinski materiali - 6. del: Kobalt-nikelj-krom-molibdenova kovana zlitina (ISO 5832-6:1997)

Ta del standarda ISO 5832 določa lastnosti in zadevne preskusne metode za kobalt-nikelj-krom-molibdenovo kovano zlitino, ki se uporablja pri izdelavi vsadkov (implantatov) za kirurgijo.
OPOMBA: Mehanske lastnosti vzorca končnega izdelka iz te zlitine niso nujno
v skladu s specifikacijami v tem delu standarda ISO 5832.

General Information

Status
Withdrawn
Public Enquiry End Date
04-Nov-2018
Publication Date
28-Oct-2019
Withdrawal Date
03-May-2022
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
25-Apr-2022
Due Date
18-May-2022
Completion Date
04-May-2022

Relations

Buy Standard

Standard
EN ISO 5832-6:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 5832-6:2018
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5832-6:2019
01-december-2019
Vsadki (implantati) za kirurgijo - Kovinski materiali - 6. del: Kobalt-nikelj-krom-
molibdenova kovana zlitina (ISO 5832-6:1997)
Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-
molybdenum alloy (ISO 5832-6:1997)
Chirurgische Implantate - Metallische Werkstoffe - Teil 6: Kobalt-Nickel-Chrom-Molybdän
Schmiedelegierung (ISO 5832-6:1997)
Implants chirurgicaux - Produits à base de métaux - Partie 6: Alliage corroyé à base de
cobalt, de nickel, de chrome et de molybdène (ISO 5832-6:1997)
Ta slovenski standard je istoveten z: EN ISO 5832-6:2019
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
SIST EN ISO 5832-6:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 5832-6:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 5832-6:2019


EN ISO 5832-6
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 11.040.40
English Version

Implants for surgery - Metallic materials - Part 6: Wrought
cobalt-nickel-chromium-molybdenum alloy (ISO 5832-
6:1997)
Implants chirurgicaux - Produits à base de métaux - Chirurgische Implantate - Metallische Werkstoffe - Teil
Partie 6: Alliage corroyé à base de cobalt, de nickel, de 6: Kobalt-Nickel-Chrom-Molybdän-Schmiedelegierung
chrome et de molybdène (ISO 5832-6:1997) (ISO 5832-6:1997)
This European Standard was approved by CEN on 2 September 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5832-6:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 5832-6:2019
EN ISO 5832-6:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 5832-6:2019
EN ISO 5832-6:2019 (E)
European foreword
The text of ISO 5832-6:1997 has been prepared by Technical Committee ISO/TC 150 "Implants for
surgery” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 5832-6:2019 by Technical Committee CEN/TC 285 “Non-active surgical implants” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 5832-6:1997 has been approved by CEN as EN ISO 5832-6:2019 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 5832-6:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 5832-6:2019
INTERNATIONAL
ISO
STANDARD
5832-6
Second edition
1997-07- 15
lmplants for surgery - Metallic materials -
Part 6:
Wrought cobalt-nickel-chromium-molybdenum
alloy
lmplants chirurgicaux - Produits 2 base de mefaux -
Parfie 6: Alliage corroyb 2 base de Cobalt, de nicke/, de chrome et
de molybd&ne
Reference number
ISO 5832-6: 1997(E)

---------------------- Page: 7 ----------------------
SIST EN ISO 5832-6:2019
ISO 5832-6: 1997(E)
Page
Contents
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chemical composition . . . . . . . . . . . . . . . . . .*. 1
3
4 Microstructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
.,.*.*. 2
5 Mechanical properties
Test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6
0 ISO 1997
Unless ot
...

SLOVENSKI STANDARD
oSIST prEN ISO 5832-6:2018
01-november-2018
Vsadki (implantati) za kirurgijo - Kovinski materiali - 6. del: Kobalt-nikelj-krom-
molibdenova kovana zlitina (ISO 5832-6:1997)
Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-
molybdenum alloy (ISO 5832-6:1997)
Chirurgische Implantate - Metallische Werkstoffe - Teil 6: Kobalt-Nickel-Chrom-Molybdän
Schmiedelegierung (ISO 5832-6:1997)
Implants chirurgicaux - Produits à base de métaux - Partie 6: Alliage corroyé à base de
cobalt, de nickel, de chrome et de molybdène (ISO 5832-6:1997)
Ta slovenski standard je istoveten z: prEN ISO 5832-6
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
oSIST prEN ISO 5832-6:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5832-6:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5832-6:2018
INTERNATIONAL
ISO
STANDARD
5832-6
Second edition
1997-07- 15
lmplants for surgery - Metallic materials -
Part 6:
Wrought cobalt-nickel-chromium-molybdenum
alloy
lmplants chirurgicaux - Produits 2 base de mefaux -
Parfie 6: Alliage corroyb 2 base de Cobalt, de nicke/, de chrome et
de molybd&ne
Reference number
ISO 5832-6: 1997(E)

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5832-6:2018
ISO 5832-6: 1997(E)
Page
Contents
1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chemical composition . . . . . . . . . . . . . . . . . .*. 1
3
4 Microstructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
.,.*.*. 2
5 Mechanical properties
Test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6
0 ISO 1997
Unless otherwise specified, no part of this publication may be
All rights reserved.
reproduced or utilized in any form or by any means, electronie or mechanical, including
photocopying and microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-121 1 Geneve 20 l Switzerland
Internet central@ iso.ch
x.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5832-6:2018
ISO 5832-6: 1997(E)
@ ISO
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 5832-6 was prepared by Technical Committee
ISO/TC 150, lmplanfs for surgery, Subcommittee SC 1, Materials.
This second edition cancels and replaces the first edition
(ISO 5832-6:1980), which has been technically revised.
ISO 5832 consists of the following Patts, under the general title lmplants for
surgery - Metallic ma terials:
- Part 1: Wrought stainless steel
- Part 2: Unalloyed titanium
- Parf 3: Wrought titanium 6-aluminium 4-vanadium alloy
- Part 4: Cobalt-chromium-molybdenum casting alloy
- Part 5: Wrought Cobalt-ch
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.